• View Basket
  • Checkout
  • Home Page


Tiger 800 & XC > Show All
 

Tiger 800 & XC


Show All

Quick Jump
Sort this list by
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID: B001 BRAKE PAD INFORMATION
More information

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.

Contact Us For Details


 

 
View cart
ID: B005 Front Brake Master Cylinder Seal kit 14mm
More information

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)

£24.95


 

 
Add to cart View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B011 Rear Brake Master Cylinder seal Kit 1/2
More information

Most Triumph produced have14 mm bore rear master cylinder size and use seal kit B010, but a few have 1/2 " to change the hydraulic pedal/caliper ratio.  If your bike is listed below check the size (it's cast into the side of the master cylinder) before ordering either this 1/2 " or Product B010 the 14 mm kit.

Fits, Bobber, Rocket III, Classic, Roadster, Tiger 800, XC, XR

£27.50


 

 
Add to cart View cart
ID: B057 Seal set 2 piston calipers
More information

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 

£14.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B225 Master cylinder piston outer boot (front)
More information

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy

£4.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B274 2 piston Nissin caliper pin boots
More information

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer

£8.95


 

 
Add to cart View cart
ID: B279 Rear brake master cylinder push rod
More information

Rear brake master cylinder rod with a choice of 52 mm, 45 mm or 38 mm of 8 mm x 1.25 pitch thread. This will fit many models and the thread can be cut for most models to shorten to the required length. 

Thunderbird 900, Legend, Adventurer, Thunderbird Sport, T595/955/600/650 Daytona, T509/955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, 955/1050 Tiger

Thread length ?:
£16.00


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B291 Rubber grease sachet
More information

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.

£1.75


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B420 Caliper slider pin Street Triple, Thunderbird 900, Tiger 900/955
More information

Stainless steel replacement slider pin for Nissin retro/cruiser style 2 piston calipers.

Used on front only:

Bonneville, T100, SE, Bobber, T120, Scrambler, Speedmaster, Street Cup, Street Scrambler, Street Triple 675, Street Triple S, Street Twin, Thruxton 900, Thruxton 1200, Thunderbird Storm and Tiger 800 range.

Used on front and rear:

Adventurer, Legend TT, Thunderbird 900 and Thunderbird Sport.

 

£18.95


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B432 Brake Banjo Annealed Copper Washers 10 mm
More information

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.

£3.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B446 Piston Set 1/2 Nymfron
More information

Set of x 4 Nissin caliper pistons (x 2  30 mm pistons and x 2  34 mm Nymfron low friction pistons). Can be fitted to any Nissin/Triumph 4 piston caliper (not Brembo). Nissin only coat the 34 mm to reduce friction/drag. This was done to help eliminate the long lever travel problems.

£54.00


 

 
Add to cart View cart
ID: B448 Rear Caliper Piston and Seal kit 38 mm (pattern)
More information

Pattern caliper piston and seals to fit rear calipers on all sports twin sided swinging arm models.

Fits TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Street Triple, Daytona 955 (twin sided swinging arm model), Tiger 800, Tiger XC,

£24.00


 

 
Add to cart View cart
ID: B609 Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
More information

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600

£7.99


 

 
Add to cart View cart
ID: B810 Disc Bolt 10 mm shoulder 30 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,

£5.49


 

 
Add to cart View cart
ID: B902 Brake pad Armstrong Bonneville, Thunderbird 900, Tiger 800/955
More information

Armstrong semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper

£12.95


 

 
Add to cart View cart
ID: B903 Brake pad Nissin Bonneville, Thunderbird 900, Tiger 800/955
More information

Nissin NS semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper

£34.25


 

 
Add to cart View cart
ID: B914 Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£32.95


 

 
Add to cart View cart
ID: B915 Rear Brake Pads 675, TT600, Tiger 800, Street Triple
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£12.95


 

 
Add to cart View cart
ID: BE078 Wheel Bearing (Koyo) and dust seals Tiger 800, Tiger 955, TT600
More information

Japanese Koyo wheel bearings (sold as a pair with dust seals for x 1 wheel). Dust seals may not fit all models.

Fits FRONT WHEEL: all Rocket 3, Thunderbird 1600/1700, Tiger 800 range, Trophy 1215

Fits REAR WHEEL: Bobber, Bonneville T120, Daytona 600/650, Daytona, 675, Daytona 955 (dual sided swinging arm), Tiger 800, Tiger XC, Tiger 1050, Tiger 955 (cast wheel model), all Rocket 3, Speed Four, Speedmaster, Street Scrambler, Street Triple 675, Street Triple 765, TT600, Daytona 600/650, Sprint RS (twin sided swinging arm), Tiger 1050 , Thunderbird 1600/1700, Thruxton, Thruxton R

£23.95


 

 
Add to cart View cart
ID: BE082 Sprocket Carrier Koyo Bearing and Seal Tiger 800, 955
More information

Japanese Koyo sprocket carrier (cush drive) bearing and seal to fit:

Tiger 800, Tiger 800 XC

Tiger 955 (cast wheel)

Bonneville, T100, America, Speedmaster, Thruxton, Scrambler

TT600, Speed Four, Daytona 600/650

955 Sprint RS (twin sided swinging arm)

955 Daytona (twin sided swinging arm)

675 Daytona, Street Triple

 

£9.95


 

 
Add to cart View cart
ID: BE704 Valve Shims 7.5 mm 1.80 - 2.95
More information

7.5 mm valve shim.

Fits: Daytona 600/650, Daytona 675, Daytona 675 R, Speed Four, TT600, Street Triple, Street Triple R, Tiger 800, Tiger 800 XC, Tiger XR.

 

Size ?:
£3.95


 

 
Add to cart View cart
ID: C346 Clutch lever span adjustable
More information

Direct replacement for 675 Daytona, Street Triple 675, 1050 Speed Triple, Sprint ST 1050, Sprint GT, 1050 Tiger, Tiger Sport, Scrambler and Thruxton. Or upgrade on 600/650 Daytona, Tiger 800, Tiger XC, 955 Daytona and 955 Speed Triple both from vin. 186150>, , 

Only fits Tiger 800 range up to VIN 674842 and Tiger Sport up to VIN 750469.

£15.95


 

 
Add to cart View cart
ID: C354 Adjustable Front brake lever 600/650/955 Daytona and 955 Speed Triple.
More information

Correct shape replacement front brake lever to fit TT600, Speed Four, 600/650 Daytona, 955 Sprint RS, 955 Sprint ST, Street Triple 675, Scrambler, Thruxton, SE and Bonneville from vin 380777, T509 Speed Triple, T595/955 Daytona, 955 Speed Triple, 1050 Speed Triple up to vin 333179 and 1050 Tiger.

Will also fit to upgrade to adjustable on Bonneville, T100, America and Speedmaster.

£16.95


 

 
Add to cart View cart
ID: C356 Front brake Tiger Explorer, Tiger 800
More information

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.

£14.95


 

 
Add to cart View cart
ID: C356 Front brake Tiger Explorer, Tiger 800
More information

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.

£14.95


 

 
Add to cart View cart
ID: CC768 Clutch cable 800 Tiger
More information

Clutch cable to fit all Tiger 800 models. Inner length 113 cm.Outer length 101 cm.

Fits:Tiger 800, 800XCA, 800XCx, 800XR, 800XRT and 800XRx.

 

£19.95


 

 
Add to cart View cart
ID: CS151 DID X-ring 525 chain and sprocket kit. Bonneville range/600/650/675
More information

DID VM2 X-ring gold chain and sprocket kit. Available for all Bonneville models, TT600, Speed Four, Daytona 675 and 675 Street Triple. Please state model when ordering. (525 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  

£119.00


 

 
Add to cart View cart
ID: CS154 DID X-ring gold chain 525
More information

Original equipment DID VX/VM2 X-ring gold 525 chain. Fits, TT600, Speed Four, Daytoina 600/650, 675 Daytona, 675 Street Triple, 800 Tiger and Tiger XC.

DID X Ring Gold 525:
£85.00


 

 
Add to cart View cart
ID: CS173 Tab Washer 675, 600 and 650 models
More information

Gearbox sprocket tab washer to fit: TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Daytona 675R, Street Triple, Street Triple R, Tiger 800 and Tiger 800XC. Replaces Triumph T1180328

£3.95


 

 
Add to cart View cart
ID: CS945 675 and 800 Gearbox Sprocket (525)
More information

Gearbox sprocket to fit Daytona 675, Street Triple, Tiger 800 and Tiger XC. Sizes available  14, 15 , 16 and 17 teeth.   (525 chain size)

Number of teeth ?:
£15.00


 

 
Add to cart View cart
ID: CS946 Rear Sprocket 675 and 800 (525)
More information

Rear sprocket to fit Tiger 800, Tiger XC, Daytona 675 and Street Triple available  in 47, 49 and  50 teeth. (525 chain size)

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS950 Chain Rivet Tool
More information

Replica DID chain rivet tool. This will push the rivet link together and neatly rivet the ends over. To separate an old chain or shorten a chain, grind the rivet ends one side of the link to be removed until the side plate is hit. Go slightly below the surface to be sure the rivetting is well ground away, then knock apart with a punch and hammer.

£39.95


 

 
Add to cart View cart
ID: D017 Rear Disc 255 mm Sprint ST, Sprint RS, Bonneville, Thruxton
More information

255 mm rear disc to fit Bonneville 800/865, T100, Thruxton, Scrambler, Sprint ST 955, Sprint ST 1050, Sprint RS, Tiger 800 and Tiger 1050 (twin sided swinging arm) Available for models with and without ABS.

ABS ?:
£79.00


 

 
Add to cart View cart
ID: EL405 Indicator left 1050 Speed Triple, 800 Tiger
More information

Left front or right rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£19.95


 

 
Add to cart View cart
ID: EL406 Indicator right 1050 Speed Triple, 800 Tiger
More information

Right front or left rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£19.95


 

 
Add to cart View cart
ID: EL407 Indicator Lens 675, 800, 1050
More information

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£4.95


 

 
Add to cart View cart
ID: EL408 Indicator stalk 675, 1050
More information

UV attacking the plastic stalk ? Bought a pattern indicator with incorrect stalk ? Broken indicator stalk ?  Here's the fix. This fits both oval and wedge style indicators, but will not fit the latest LED indicators originally offered as an option and now standard equipment on many models.

Indicator stalk to fit all Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675, 1050 Speed Triple, Tiger 1050, Tiger Sport, Tiger Explorer (rear), Daytona 600/650 and Sprint ST 1050 (rear).

 

 

£3.95


 

 
Add to cart View cart
ID: EX083 Exhaust studs steel, all 3 cylinder models
More information

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.

£9.95


 

 
Add to cart View cart
ID: EX085 Exhaust header stainless steel studs (priced each)
More information

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS

£3.95


 

 
Add to cart View cart
ID: EX097 Exhaust seal Daytona 675, Steet Triple and Tiger 800
More information

Set of x 3 exhaust seals. These are just the best quality exhaust header seals made for the first generation Daytona 675 (up to VIN 381274), Speed Triple 675 (up to VIN 560477) and all Tiger 800 models. Replaces Triumph T2200824

£12.95


 

 
Add to cart View cart
ID: EX356 Exhaust connector 800 Tiger
More information

Exhaust connector to fit race can to 800 Tiger models. Outlet size approximately 50.5mm.

£49.00


 

 
Add to cart View cart
ID: F088 Gear Change Rubber Thunderbird, Bonneville, Tiger 800
More information

Gear change rubber to fit Thunderbird 900, Legend, Thunderbird Sport, Adventurer, Bonneville 800/865, T100, America, Speedmaster and Tiger 800, Tiger XC, Tiger XCX and Tiger XRX.

£2.95


 

 
Add to cart View cart
ID: F630 Cover/Boot Gear Change Ball Joint
More information

Gear change ball joint end pivot boot/cover. All models.

£2.95


 

 
Add to cart View cart
ID: H682 Haynes Manual Tiger 800 Range
More information

Haynes workshop manual for the Tiger 800 range. Specifically aimed at 2010 - 2014 Tiger and Tiger XC including ABS.

£19.99


 

 
Add to cart View cart
ID: J017 Fuel Filler cap 600, 650, 675, 800, 955, 1050
More information

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509

£49.95


 

 
Add to cart View cart
ID: J183 Fuel Connector O-Rings
More information

Fuel connector  O-rings x 2 used on fuel injected models. These  O-rings are manufactured from Viton.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems. When removing a fuel connector, make sure the clip is released and while separating keeping square at all times until fully apart.

Fits T595, T509, 955 Daytona, 955 Speed Triple, TT600, Speed Four, Sprint 995 ST, Sprint 995 RS, Tiger 900 (injected) and Tiger 955.

£1.90


 

 
Add to cart View cart
ID: J185 Oil Filter OE Fits all Injected Models
More information

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600

£9.95


 

 
Add to cart View cart
ID: J187 Oil filter wrench 955/1050/Bonneville range
More information

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 

£12.95


 

 
Add to cart View cart
ID: J189 Sump plug washer 14 mm
More information

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.

£1.45


 

 
Add to cart View cart
ID: J190 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.

£5.95


 

 
Add to cart View cart
ID: J191 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.

Contact Us For Details


 

 
View cart
ID: J710 Hilflofiltro Air Filter Tiger 800 Range
More information

Hiflofiltro replacement air filter to all the Tiger 800 Range.

£13.95


 

 
Add to cart View cart
ID: K922 Cam Cover Seal 675 and 800 all models
More information

Cam cover seal and cam cover screw seal set to fit all Daytona 675, Street Triple 675 and Tiger 800 models.  Also fits: Street Triple S, Street Triple R and Street Triple RS 765 models. Fits all Street Triples from VIN 803572.

£24.95


 

 
Add to cart View cart
ID: K935 Tiger 800 Lower Engine Cover Gaskets
More information

Engine cover gaskets to fit all Tiger 800 models. Fits Tiger 800, 800XCA, 800XCx, 800XR, 800XRT and 800XRx.

£16.95


 

 
Add to cart View cart
ID: L265 Tiger 800 rack
More information

Tubular steel rack to fit Tiger 800 models. Manufactured by Renntec in UK.

£89.95


 

 
Add to cart View cart
ID: S063 Replacement chromed fork tubes to fit most models
More information

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.

Model ?:
£99.00


 

 
Add to cart View cart
ID: S315 Steering Head Bearing Set 675, 800, 1050
More information

Taper roller steering head bearing set and seals to fit 1050 Sprint ST, 1050 Tiger, 800 Tiger, Tiger XC, Daytona 675 and Street Triple. All Balls brand.

£29.00


 

 
Add to cart View cart
ID: S502 Replacement fork seals (priced per pair)
More information

43 mm fork seals to fit Showa forks. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. Just state what bike you have when ordering. NOW WITH LATEST DOUBLE SPRUNG LIP DESIGN. These fit all Sprint ST 955, all Sprint RS and all Sprint ST 1050. They also fit (please check VIN numbers) Trophy900/1200, Trident, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, Tiger 1050, Tiger Sport, Speed Triple 1050 up to VIN 461331 

Thunderbird, Adventurer and Legend after VIN 43510 and up to VIN 92814.  

Trophy after VIN 42275 except from VIN 96152 to VIN 98479.

1050 Speed Triple up to VIN 461331

Trident after VIN 44302.

Tiger 900 after VIN 43524

Sprint RS and ST 955

Sprint 1050, Sprint GT,

Tiger 1050 and Tiger 800 range.

Tiger 900 (injection) and 955 Tiger

£10.95


 

 
Add to cart View cart
ID: TA738 Gear Change Shaft Seal. 675, 800, 1050, 1215 Replaces Triumph T3600088
More information

Gear change shaft seal used on all more recent and current models. Replaces Triumph T3600088

Fits: America (EFI from VIN 372713), Bobber, Bonneville& SE (from VIN  372713), T120, Daytona 675, 675R, Scrambler EFI (from VIN 372713), Street Triple 675, Street Triple 765 R, RS, S, Street Twin, Thruxton 900 EFI (from VIN 372713), Thruxton, Thruxton R, Thunderbird Storm, Tiger 1200 Explorer all, Tiger 800 all, Trophy 1215, SE

 

£3.25


 

 
Add to cart View cart
ID: TA741 Gearbox Output seal 675
More information

Output seal to fit all 675 and 800 models. 35mm x 62mm x 5mm .

Fits:Bonneville Bobber, T120, T120 black, Daytona 675, Daytona 675 R, Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S and RS, Thruxton 1200, Thruxton R, Tiger 800,

 

£5.95


 

 
Add to cart View cart
ID: TA864 Seal for cam cover screw (Black) twin lip
More information

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.

£1.99


 

 
Add to cart View cart
ID: Z132 Stick Ignition Coil 675 and 800 models
More information

Replacement ignition coil to fit all 675 Daytona, Street Triple, 800 Tiger and 800 Tiger XC

£59.00


 

 
Add to cart View cart
ID: Z276 NGK CR8EK and CR9EK spark plug
More information

Original equipment NGK CR8EK and CR9EK twin electrode spark plug to fit TT600, Speed Four, 600/650675 Daytona,  675 Street Triple, 675 Street Triple R, Tiger 800, Tiger 1050, Speed Triple 1050, 955 Speed Triple from vin 141872, Daytona 955 from vin 132513, Sprint RS/ST from vin139277

Plug type ?:
£8.99


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z423 Flasher relay 2 pin(including LED) Daytona 675, Street Triple Tiger 800
More information

Replacement 2 pin/connector flasher relay will work with original lamps (which have 10w bulbs). This unit is also excellent with most LED indicators. Unlike original incandescent bulbs, LED lamps are polarity sensitive.

Fits Daytona 675, Street Triple 675,Tiger 800, Tiger XC and Bonneville range with 2 pin relay fitted.

£12.00


 

 
Add to cart View cart
ID: Z424 Chaneover Relay (starting relay) Bonneville, 955 ST, 1050 ST,
More information

Uprated 40A changeover relay used on starting to switch the lights off.

Fits all the Bonneville range up to VIN 317247, 955 Sprint ST, 955 Sprint RS, Tiger 800 and 1050 Sprint ST

£7.95


 

 
Add to cart View cart
ID: Z589 Cam Chain Tensioner Spring 675 Daytona, Street Triple, Tiger 800 and Explorer
More information

Replacement Cam Chain Tensioner Spring - Triumph Street Triple, Street Triple R, Daytona 675, Tiger 800 and Tiger 800XC

New Replacement Cam Chain Tensioner Spring for use in Black Coloured Hydraulic cam chain tensioner housings used on 675 Daytona and Street Triple after VIN 493832, Tiger 800 and Tiger 800XC

Also used on the Street Triple R after VIN 493832 apart from VIN 503519 to 508231 which have the silver coloured adjuster fitted.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 35mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly.

With this style of tensioner, it has to be removed to fit a new spring. There are x 2 spring clips on these tensioners. The rear spring in the tensioner slot if pulled together will allow the plunger to compress or be completely removed to change the spring.The front clip is used to hold the plunger fully in for reassembly. When the plunger is compressed, the front clip can be pulled together with long nose pliers to locate in the groove near the tip of the plunger.

£11.95


 

 
Add to cart View cart
ID: Z701 Cam Cover Seal Set of 8 (3 Cylinder Carburettor Engines)
More information

8 cam cover screw seals to fit all 3 cylinder carburettor models. These bonded seals were known originally as Dowty seals.

TA864 x 8

£14.95


 

 
Add to cart View cart





 
eXTReMe Tracker