• View Basket
  • Checkout
  • Home Page


Tiger 900 (carburettor)


Show All

Quick Jump
Sort this list by
ID:
More information

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID: B001 BRAKE PAD INFORMATION
More information

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.

Contact Us For Details


 

 
View cart
ID: B005 Front Brake Master Cylinder Seal kit 14mm
More information

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)

£24.95


 

 
Add to cart View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B057 Seal set 2 piston calipers
More information

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 

£14.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B225 Master cylinder piston outer boot (front)
More information

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy

£4.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B274 2 piston Nissin caliper pin boots
More information

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer

£8.95


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B291 Rubber grease sachet
More information

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.

£1.75


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B302 Rear brake switch hydraulic type.
More information

Replacement rear brake switch to fit all 3/4 cylinder carburettor models, Bonneville range, 955 Sprint RS and ST.

 

750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900/955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint 955 ST and RS.

£13.95


 

 
Add to cart View cart
ID: B302 Rear brake switch hydraulic type.
More information

Replacement rear brake switch to fit all 3/4 cylinder carburettor models, Bonneville range, 955 Sprint RS and ST.

 

750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900/955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint 955 ST and RS.

£13.95


 

 
Add to cart View cart
ID: B400 Nissin hydraulic clutch master cylinder (black)
More information

Nissin clutch master cylinder. Latest sports style with remote reservoir pot. Fits all 3 and 4 cylinder carburettor models. Same 14 mm bore size as original part. Black finish on master cylinder.

Fits 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor), Sprint Sport, Sprint 900, Sprint Executive, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

£136.00


 

 
Add to cart View cart
ID: B400 Nissin hydraulic clutch master cylinder (black)
More information

Nissin clutch master cylinder. Latest sports style with remote reservoir pot. Fits all 3 and 4 cylinder carburettor models. Same 14 mm bore size as original part. Black finish on master cylinder.

Fits 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor), Sprint Sport, Sprint 900, Sprint Executive, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

£136.00


 

 
Add to cart View cart
ID: B400 Nissin hydraulic clutch master cylinder (black)
More information

Nissin clutch master cylinder. Latest sports style with remote reservoir pot. Fits all 3 and 4 cylinder carburettor models. Same 14 mm bore size as original part. Black finish on master cylinder.

Fits 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor), Sprint Sport, Sprint 900, Sprint Executive, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

£136.00


 

 
Add to cart View cart
ID: B418 Nissin brake pad locator
More information

The 2 piston Nissin caliper used on the rear of many models and  retro front calipers. The caliper moves on slider pins when the brake is applied. The outer brake pad has a hook located in this brake pad locator nut which is screwed onto one of the slider pins. Manufactured from stainless steel. (See slider pins listed below, also in stainless steel).

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, 955 Sprint RS (single sided swinging arm model),

Made in UK

£11.95


 

 
Add to cart View cart
ID: B419 2 piston caliper slider bracket pins (pair)
More information

Stainless steel replacemet pins for the 2 piston (on one side) calipers used  on the rear of most models and front of  very early Trophy, Sprint, and Trident models. The used bracket assembly is shown for reference only to help illustrate pin location.

These fit the front calipers of the following: 750/900 Trident, Tiger 900 (carburettor models), 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fits the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster

 

£19.95


 

 
Add to cart View cart
ID: B421 Caliper bracket
More information

Threaded rear caliper bracket (less caliper slider pins).

Fits, Trident 750/900, Tiger 900 (carburettor), 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport, Sprint Exec...

£19.00


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B606 Brake caliper pins 64 mm
More information

64mm long pad pins used on the rear of many Triumph models. These are also used on the front of all Tridents and early Trophy/Sprint models with twin piston (reaction type) calipers. This style of caliper uses 2 pins  to retain the pads. These are sold as a pair. The pad pins are genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B811 Disc Bolt 1.5 mm shoulder 18 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 18 mm including 1.5 mm shoulder.

Fits front and rear on:

Adventurer, America, Bonneville, T100, Legend TT, Scrambler,  Speedmaster, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor and EFI), Tiger 955

Fits rear only on:

T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

 

 

£5.49


 

 
Add to cart View cart
ID: B905 Brake Pad EBC Organic Front/rear Trident, Trophy, Sprint
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models), Tiger Explorer, Tiger 955 cast alloy wheel model (from vin 198875), Tiger 1050

Fit the front right side of the following: Tiger 900 (carburettor), 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 49010.

Made in UK.

£16.95


 

 
Add to cart View cart
ID: B906 Brake pad Nissin front/rear Trident, Trophy, Sprint
More information

Nissin NS semi metallic front brake pads.

Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models),Tiger 955 cast wheels (from vin 198875) and Tiger 1050

Fit the front right side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 4901)

£33.25


 

 
Add to cart View cart
ID: B909 EBC Organic Brake Pads Bonneville (rear), 900, 955, 1050
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£16.95


 

 
Add to cart View cart
ID: B910 Brake pad Nissin Bonneville (rear), 955, 1050
More information

Nissin NS semi metallic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£33.25


 

 
Add to cart View cart
ID: BA019 YB14LA2 gel sealed battery
More information

Sealed maintenance free LP/JMT gel battery. Upgrade/replaces YB14LA2

Fits: 750/900 Trident, 900/1200 Trophy, Legend, Thunderbird, Thunderbird Sport ,Adventurer, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive and Tiger 900

Also fits: T595/955 Daytona up to vin 71698, T509/955 Speed Triple up to vin 79696 

£53.95


 

 
Add to cart View cart
ID: BE074 Front Wheel Bearings Tiger 900/955, Bonneville
More information

x 2 Koyo wheel bearings to fit

Fits front wheel: Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955 all models, Bonneville, T100, Thruxton, Scrambler

Fits rear wheel: Bonneville 800/865, T100, Scrambler, Thruxton 900

 

£17.00


 

 
Add to cart View cart
ID: BE076 Rear Wheel Bearings Trident, Trophy, Daytona
More information

x 2 Koyo REAR wheel bearings to fit

Tiger 900 (carburettor), Tiger 900 (injection), 750/900 Trident, 900/1200 Trophy, Sprint 900, Sprint Sport, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, 955 Tiger (wire/spoked wheel model)

£17.00


 

 
Add to cart View cart
ID: BE077 Sprocket Carrier Bearing
More information

Sprocket carrier (cush drive) bearing and dust seal to fit:
750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (injection and carburettor), Sprint 900, Sprint Sport, Sprint Executiive, Tiger 955 (wire wheel version) up to VIN198874, Thunderbird 900, Adventurer, Legend, Thunderbird Sport, America and  Speedmaster.

£11.95


 

 
Add to cart View cart
ID: BE699 Valve Shims 25 mm 2.05 - 2.25
More information

Valve shim 25 mm diameter. Sizes from 2.05 to 2.25.

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955 up to VIN 132512, Legend, Rocket III, Classic, Roadster & Touring, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple up to VIN 141871, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955 up to VIN 139276, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, 750 & 900 Trident, Trophy 900 & 1200

Shim Thickness:
£7.95


 

 
Add to cart View cart
ID: BE700 Valve Shims 25 mm 2.30 - 3.20
More information

Valve shim 25 mm diameter. Sizes from 2.30 to 3.20

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955 up to VIN 132512, Legend, Rocket III, Classic, Roadster & Touring, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple up to VIN 141871, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955 up to VIN 139276, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, 750 & 900 Trident, Trophy 900 & 1200

 

Shim Thickness:
£3.95


 

 
Add to cart View cart
ID: C351 Clutch lever
More information

Replacement clutch lever for 900 Thunderbird, Legend and Adventurer.

£12.00


 

 
Add to cart View cart
ID: C352 Front brake lever
More information

Replacement front brake lever for 900 Thunderbird, Legend and Adventurer.

£12.00


 

 
Add to cart View cart
ID: C363 Clutch lever Tiger 900
More information

Clutch lever to fit all Tiger 900 carburettor models. Also used on early versions of the Trident 750/900, Trophy 900/1200 and Sprint 900.

£12.95


 

 
Add to cart View cart
ID: C364 Front Brake Lever Tiger 900
More information

Forged front brake lever to fit all Tiger 955, Tiger 900 carburettor and EFI models. Also used on early versions of the Trident 750/900, Trophy 900/1200 and Sprint 900

£22.95


 

 
Add to cart View cart
ID: CC700 Choke Cable Tiger 900, Thunderbird 900, Legend
More information

Choke cable to fit Legend TT, Thunderbird 900, Trophy 900/1200 (twin headlight model) and Tiger 900. Inner length 100 cm. Replaces Triumph T2040465


 

£16.95


 

 
Add to cart View cart
ID: CC709 Throttle cable Keihin Thunderbird Sport, Legend, Tiger 900 (Carb.) Trophy 95>
More information

Throttle cable to fit Keihin carburettors:

Trophy 900/1200 from VIN 29156 (twin headlight models)

Thunderbird 900

Thunderbird Sport

Tiger 900 (carburettor models)

Legend TT

Cable details: 110 cm inner cable. 103 cm outer.

This is a copy of Triumph cable T2043512 and can be fitted to Adventurer models with Keihin carburettors, but care with routing is required.

 

£14.95


 

 
Add to cart View cart
ID: CC711 Throttle cable Mikuni Thunderbird Sport, Legend, Tiger 900 (Carb.) Trophy 95>
More information

Throttle cable to fit Mikuni carburettors:

Trophy 900/1200 from VIN 29156 (twin headlight models)

Thunderbird 900

Thunderbird Sport

Tiger 900 (carburettor models)

Legend TT

Cable details: 110 cm inner cable. 103 cm out

£19.95


 

 
Add to cart View cart
ID: CC722 Speedo Cable Trophy and Tiger
More information

Speedo cable 101cm (39 3/4") outer length to fit twin headlamp Trophy, Sprint 900, 750/900 Speed Triple, Sprint Sport, Sprint Executive, Tiger, Adventurer, Thunderbird 900, Thunderbird Sport and Legend TT

Take care not to over tighten the 5 mm screw holding the cable into the drive unit

£15.00


 

 
Add to cart View cart
ID: CL330 Fan Switch Trident, Trophy, Daytona 900/1200
More information

Cooling fan switch and sealing washer. Early fan switch fits on left side of radiator. Switches on at 96 C and switchws off when temperature is down to 88 C.

Fits 750/900 Trident, 900/1200 Trophy,  750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive and Tiger 900 (carburettor).

£19.95


 

 
Add to cart View cart
ID: CL393 Clutch master cylinder seal kit
More information

Seal kit for hydraulic clutch model master cylinder/control lever. 14 mm bore size.

Fits: 750/900/1000/1200 Daytona, Legend, 750/900 Trident, 750/900 Speed Triple, 900/1200 Trophy, 900 (carburettor) Tiger, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Adventurer, Thunderbird Sport

£23.95


 

 
Add to cart View cart
ID: CL442 Clutch Slave Cylinder Seal Kit
More information

Replacement seal kit for clutch slave cylinder, fits all 3 and 4 cylinder hydraulic clutch models.

750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, 900 Tiger (carburettor model), Thunderbird, Thunderbird Sport, Legend and Adventurer. Also fits Trophy 1215, SE, Tiger Explorer 1200/1215, XC, Xcx, XRT, Xrx

£23.00


 

 
Add to cart View cart
ID: CL497 Water pump seals
More information

Seal set for when the water pump is disturbed. x 3 seals seals include the red cover seal, O-ring seal into engine and O-ring on outlet metal pipe. The internal shaft seals are not available.

Fis 750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, 900 Tiger, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Thunderbird 900, Thunderbird Sport, Legend and Adventurer.

£4.95


 

 
Add to cart View cart
ID: CL499 Water Pump Joint Seal
More information

Replacement red joint seal for when water pump is disturbed. O-ring where pump enters the engine and copper sealing washer under joint screw are also included (on some models).

Fits T595, T509, 955 Daytona, T509 Speed Triple, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint GT, Tiger 900 (EFI), Tiger 955, 1050 Tiger, Tiger Sport

£3.95


 

 
Add to cart View cart
ID: CL600 Clutch Pivot Bush, Pin and Boot Kit
More information

Clutch master cylinder brass pivot bush, pin and dust cover/boot. The brass bush fits in the clutch lever and pushes the pin to operate the clutch master cylinder. Red rubber grease or silicon grease on assembly.

Fits: Adventurer, Legend TT, 750/900/1000/1200 Daytona, 750/900 Trident, 900/1200 Trophy, 900 Tiger, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Thunderbird 900 and Thunderbird Sport.

£9.95


 

 
Add to cart View cart
ID: CL672 Clutch lever switch
More information

Clutch lever switch. Genuine Nissin part.

Fits: 750/900/1000/1200 Daytona, Legend, 750/900 Trident, 750/900 Speed Triple, 900/1200 Trophy, 900 (carburettor) Tiger, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Adventurer, Thunderbird Sport

£11.95


 

 
Add to cart View cart
ID: CL928 Clutch plate set EBC T300 Trophy, Trident
More information

Clutch friction 9 plate set to fit all carburettor 3 and 4 cylinder models with cover gasket.

750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 (carburettor) Tiger, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Legend, Adventurer, Thunderbird Sport

£89.00


 

 
Add to cart View cart
ID: CL929 Clutch plate set T300 Trophy, Trident
More information

Clutch friction 9 plate set to fit all carburettor 3 and 4 cylinder models with cover gasket.

750/900 Trident, 750/900/100/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 (carburettor) Tiger, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Legend, Adventurer, Thunderbird Sport

 

£59.00


 

 
Add to cart View cart
ID: CL930 Clutch Spring Set
More information

EBC Clutch Spring set. 43 mm long. 15% uprated from standard

Fits 750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 (carburettor) Tiger, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Legend, Adventurer, Thunderbird Sport

£12.95


 

 
Add to cart View cart
ID: CS110 Cush Drive Rubbers Trident, Trophy, Thunderbird 900
More information

Set of x 5 cush rubbers. Replaces  Triumph 2012200-T0301, 2012210-T0301 and T2012211. This new replacement will fit both cast and spoked wheel models listed below.

Fits: Adventurer, America, 750/900/1000/1200 Daytona, Legend TT, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor models), Tiger 900i, Tiger 955 (up to VIN 198874) and 900/1200 Trophy. 

 

 

£29.95


 

 
Add to cart View cart
ID: CS141 Gearbox sprockets 900/1200/955/1050 (530)
More information

Gearbox sprockets available in 17, 18 or 19 teeth for all carburettor 3/4 cylinder models, all 955 and all 1050 models. Smaller than standand gives improved acceleration at the expense of fuel consumption and on some models increased chain guide wear. Larger than standard engine sprockets lose out slightly on acceleration but have a more relaxed feel in top gear.  Please state size when ordering. (530 chain size).

Number of teeth ?:
£15.00


 

 
Add to cart View cart
ID: CS143 Rear sprockets (530)
More information

Rear sprockets in 40, 42, 43, 44, 45, 46, 47, 48 or 49 teeth to fit all carburettor 3 and 4 cylinder models as well as all wire wheel 955 Tiger models. Please state size when ordering. (530 chain size).

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS145 DID Chain and Sprocket Kit (530)
More information

530 VX gold heavy duty X-ring DID chain with sprockets, tab washer and sprocket cover gasket if required. Please state model when ordering and if in doubt just let us know what sprocket sizes you would like. (530 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  

Your bike ?:
£125.00


 

 
Add to cart View cart
ID: CS155 DID X-ring gold chain 530
More information

Original equipment DID VX  X-ring gold chain 530 size (5/8 x 3/8). Fits all 750, 900 (3/4 cylinder),1000, 955, 1200 and 1050 models.

DID X Ring Gold 530:
£89.00


 

 
Add to cart View cart
ID: CS174 Lock Nut Flanged Sprocket Carrier
More information

12 mm x 1.25 flanged lock nut to hold rear sprocket on to carrier. Price for x 1 nut

Fits, Adventurer, 750/9001000/1200 Daytona, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Sport, Sprint Executive, Thunderbird 900, Thunderbird Sport, Trophy 900/1200, Tiger 900, Tiger 955.

£1.00


 

 
Add to cart View cart
ID: CS176 Tab Washer Gearbox Sprocket 2, 3 and 4 cylinder carburettor models, 955, 1050.
More information

Gearbox sprocket tab (locking) washer to fit all of the Bonneville range (carburettor and EFI), 955, 1050 and 3/4 cylinder carburettor models. Replaces Triumph T1180181

 

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Super III, 900 Tiger, 750/900 Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, T595, 955 Daytona, T509, 955 Speed Triple, 955 Sprint ST, 955 Sprint RS, 955 Tiger, 1050 Tiger, Tiger Sport, 1050 Sprint ST, 1050 Sprint GT, 1050 Speed Triple, Bonneville 800/865, T100, Scrambler, America, Speedmaster, Thruxton and SE.

Tab Washer Gearbox Sprocket 3 and 4 cylinder carburettor models, 955, 1050.

£3.95


 

 
Add to cart View cart
ID: D006 Front Disc 900 Tiger (carburettor)
More information

Front disc to fit all carburettor Tiger 900. 1993-98. Quantity x 1 disc. This fits all Tiger 900 up to VIN 71698. Made in UK.

£79.00


 

 
Add to cart View cart
ID: D019 Rear disc Tiger 900
More information

Rear disc to fit all carburettor Tiger models. 255 mm. This fits all Tiger 900 up to VIN 71698

£79.00


 

 
Add to cart View cart
ID: EG400 Regulator unit to fit separate Denso generator. Trident, Trophy, Thunderbird 900
More information

Replacement regulator to fit Denso generator used on all Trident, Trophy, 750/900/1000/1200  Daytona, 750/900 Speed Triple, Tiger 900, Sprint 900, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint ST 955 (up to vin 139276), Sprint Sport, Sprint RS (up to vin 139276), T509 Speed Triple, 955 Speed Triple (up to vin 141871), T595 and 955 Daytona (up to vin 132512)

Made in Argentina

£68.00


 

 
Add to cart View cart
ID: EL104 Indicator Stalk Front Trident, Trophy, Daytona, Speed Triple 900
More information

Front indicator stalk to fit indicators used on carburettor 3 and 4 cylinder models.

Fits: 750/900/1000/1200 Daytona, Super III, 750/900 Speed Triple, 750/900 Trident (not chrome indicators),Trophy 900/1200 (up to VIN 29155).

£8.95


 

 
Add to cart View cart
ID: EL106 Indicator Stalk Rear Trident, Speed Triple 900, Sprint 900
More information

AWAITING NEW STOCK

Rear shorter indicator stalk for carburettor 3 and 4 cylinder models used on the rear only. 50 mm long ( 70 mm including thread)

Fits: 750/900/1000/1200 Daytona, Super III, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, 750/900 Trident, Tiger 900 (carburettor), Trophy 900/1200 (up to VIN 29155).

 

 

Contact Us For Details


 

 
View cart
ID: EL107 Xenon headlight bulb H4
More information

Xenon 60/55 w 472 H4 type headlight bulb, 30% brighter than standard. Fits all carburettor models and all 955 models.

£7.50


 

 
Add to cart View cart
ID: EX083 Exhaust studs steel, all 3 cylinder models
More information

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.

£9.95


 

 
Add to cart View cart
ID: EX085 Exhaust header stainless steel studs (priced each)
More information

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS

£3.95


 

 
Add to cart View cart
ID: EX088 Exhaust header pipe seals x 3 (round) Trident, Speed Triple 900
More information

Set of x 3 round exhaust port (exhaust header pipe/cylinder head) gaskets which fit all  3 and 4 cylinder carburettor models as well as the 800/865 twins, 900 injection Tiger, T509 Speed Triple, TT600, Speed Four and Daytona 600/650.

750/900 Trident, 750/900 Speed Triple, 600/650/750/900/1000/1200 Daytona, 900/1200 Trophy, Thunderbird 900, Legend, Thunderbird Sport,  Adventurer, Tiger 900, Tiger 900 injection, T509 Speed Triple, TT600, Speed Four,

£5.25


 

 
Add to cart View cart
ID: EX254 Exhaust connectors for Tiger 900
More information

Stainless connectors for carburettor model Tiger 900 for fitting aftermarket 51mm bore silencers. Outlet size approx 51mm. (Priced per par)

Contact Us For Details


 

 
View cart
ID: EX673 Exhaust Clamp 43-47 mm
More information

Stainless steel exhaust clamp with internal range from 43 to 47mm diameter.

Silencer clamp size for 955 Sprint ST and RS

£4.95


 

 
Add to cart View cart
ID: F001 Frame finishers stainless steel
More information

Polished stainless steel frame finishers (Outrigger Finisher Kit). Frame finishers were originally supplied by Triumph as chrome plated accessories and aimed at 900 Thunderbird, Adventurer and Legend owners. These will also fit all steel frame 3 and 4 cylinder models from 1991 to 2004. Supplied as a set of 4.

Fits: Adventurer, Daytona 750, 900, 1000, 1200, Legend, 750 & 900 Speed TripleSprint 900, Sprint Sport, Sprint Executive, Thunderbird 900, Thunderbird Sport,Tiger 900 (carburettor), 750 & 900 Trident, Trophy 900 & 1200 (up to VIN 29155).

 

Contact Us For Details


 

 
View cart
ID: F089 Gear change lever rubber
More information

These are very high quality gear change rubbers, which will outlast the original part. 41 mm long.

To Fit:

Sprint 900, Sprint Sport, Sprint Executive and Trident Sprint.

Speed Triple 750/900

Trophy 900/1200

Trident 750/900

Daytona 750, 900, 1000, 1200

Tiger 900 carburettor and injection (EFI)

Tiger 955

TT600 and Speed Four

Sprint 955 RS and 955 ST (up to VIN 139276)

Daytona T595 and 955 from VIN 87317 (one piece 'reverse' gear lever)

Speed Triple 955 from VIN 87317 (one piece 'reverse' gear lever)

£1.75


 

 
Add to cart View cart
ID: F099 Foot Rest Rubbers Carburettor 3 and 4 Cylinder Models
More information

Footrest rubbers that are the same high quality as original equipment and now supplied with stainless steel fixing screws. Replaces Triumph 2080031-T0301

These fit 750/900/1000/1200 Daytona, 750/900 Trident, 750/900 Speed Triple, 900/1200 Trophy (single headlamp model), Trident Sprint, Sprint 900, Sprint Sport, 955 Sprint ST (front), 955 Sprint RS (front). Rear footrest rubbers on Tiger 900 (carburettor) models.

Sold as a pair.

 

 

£9.95


 

 
Add to cart View cart
ID: F622 Lever bush 955 ST/RS 600/650 Thruxton Tiger (12mm)
More information

Brake pedal pivot bush for Tiger 900, Tiger 955, Bonneville Thruxton, TT600, Speed Four, Daytona 600 and 650.

Gear change pedal pivor bush for Tiger 900, 955 Sprint ST, Sprint RS and 1050 Sprint ST.

Internal size 12mm.

£4.25


 

 
Add to cart View cart
ID: G005 Mikuni Inlet Rubber (Cylinder Head to Carburettor)
More information

Triumph have used Mikuni and Keihin carburettors. This part fits models with Mikuni carburettors and is an unrestriced inlet rubber.

As original fitment on 750/900/1000/1200 Daytona, Daytona Super III, 750/900 Speed Triple, Trident Sprint, Sprint 900, Sprint Executive, Sprint Sport, 750/900 Trident, 900/1200 Trophy, 900 Tiger (carburettor) and Thunderbird Sport.

The 900 Thunderbird range originally had restricted inlet rubbers to give more bottom end performance at the expence of mid range and top end. The unrestricted rubber listed here can also be fitted to the following models instead of the restriced inlet rubber: Adventurer, Legend, and Thunderbird.

NEW STOCK IN NOVEMBER

 

 

Contact Us For Details


 

 
View cart
ID: G010 Mikuni (Air Box to Carburettor) Rubber
More information

Triumph have used Mikuni and Keihin carburettors. This fits all Mikuni carburettor models from air box to carburettor.

Fits:  Adventurer, 750/900/1000/1200 Daytona, Daytona Super III, Legend, 750/900 Speed Triple, Thunderbird 900, Thunderbird Sport, Trident Sprint, Sprint 900, Sprint Executive, Sprint Sport, 750/900 Trident, 900/1200 Trophy and 900 Tiger (carburettor).

Replaces Triumph 2200013-T0301. 

 

£7.95


 

 
Add to cart View cart
ID: G015 Inlet Rubber Keihin (Cylinder Head to Carburettor)
More information

Inlet rubber for all models with Keihin carburettors fitted.

Where Keihin carburettors are used these fit: Adventurer, America, Bonneville 800/865, T100, Legend TT, Scrambler, Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Thruxton, Thunderbird 900, Thunderbird Sport, Trophy 900

£6.95


 

 
Add to cart View cart
ID: G020 Keihin (Air Box to Carburettor) Rubber
More information

Carburettor to airbox rubbers for all 3 cylinder models with Keihin carburettors fitted.

Where Keihin carburettors are used these fit: Legend TT, Sprint 900, Sprint Sport, Sprint Executive,  Thunderbird 900, Thunderbird Sport and Trophy 900

£5.95


 

 
Add to cart View cart
ID: G320 Mudguard extender front 900 Tiger
More information

 Satin black plastic front guard extender to fit all carburettor model 900 Tiger.

£19.99


 

 
Add to cart View cart
ID: H692 Handlebar End Tiger 900 (Aluminium Alloy)
More information

Original type anodised aluminum alloy handlebar end fitted to Tiger 900 (carburettor models) 1993 - 1998. Same size and shape as stainless steel handlebar end, product code H691. Supplied with stainless steel fixing screw.

Can also be fitted to 750, 900, 1000, 1200 Daytona, 750/900 Speed Triple, 750/900 Trident and 900/1200 Trophy. This is lighter than the standard stainless steel handlebar end used on these models.

 

£12.95


 

 
Add to cart View cart
ID: J002 Dip stick Trident, Sprint 900, Tiger 900, Trophy
More information

Black anodized billet aluminium alloy dip stick with stainless steel level rod. Throw away that badly moulded cross threading plastic dip stick and replace it with this lovely piece of workmanship - almost too good to use.

Fits, Trident 750/900, Sprint 900, Trident Sprint, Sprint Sport, Sprint Executive, Tiger 900 (carburettor), Daytona 750/900/1000/1200, Speed Triple 750/900, Trophy 900 and Trophy 1200 grey engine.

A few very early models had very fine threaded dip sticks (only up to vin 3926) which we only stock in plastic.

 

£25.00


 

 
Add to cart View cart
ID: J003 Fuel pipe set
More information

Genuine Triumph fuel pipes and pattern vacuum pipe with x 4 clips to fit all models with vacuum operated fuel tap and Mikuni carburettors (Not Tiger 900 and Thunderbird 900 range). 

750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport, Sprint Executive, and 750/900 Speed Triple.

 

 

£47.95


 

 
Add to cart View cart
ID: J005 Fuel Filler Cap Seal
More information

Water in the fuel tank ?  Make sure the water drain hole (from under filler cap to rubber pipe on rear of fuel tank) is clear.  The fuel filler cap seal is supplied bonded to a plated steel dished plate and is a direct swap for the original part. When the filler cap is closed this seals against the fuel tank filler neck and is supplied with no springs, original parts are required to be reused. The third and forth pictures on this listing are of a complete filler cap just to show where the seal fits. This listing is not for a complete filler cap !

Fuel filler cap metal bonded seal fits 750/900 Trident. 750/900 Speed Triple, 900/1200 Trophy, Tiger 900 (carb), Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Super III and 750/900/1000/1200 Daytona.

£12.95


 

 
Add to cart View cart
ID: J030 Mikuni Main Jet
More information

The more popular Mikuni main jet sizes. Sold individually.

Size ?:
£3.50


 

 
Add to cart View cart
ID: J035 Fuel tap seals Thunderbird 900, Tiger 900 and Bonneville 800/865
More information

Tap spindle seal and face seal to fuel tank. This will fix a fuel tap if the fuel is leaking to the outside of the tap, but will not stop fuel going through the tap to the carburettors when turned off.

Bonneville 800/865, T100, SE, Thruxton, Speedmaster, America, Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 900 Tiger (carburettor)

£7.95


 

 
Add to cart View cart
ID: J040 Mikuni Diaphragm
More information

Genuine Mikuni diaphragm to fit all Mikuni carburettors used on Triumph models.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£10.65


 

 
Add to cart View cart
ID: J070 Mikuni Carburettor Top Aluminium
More information

Mikuni replacement carburettor top manufactured from black anodized aluminum. Work of art. Fits all Mikuni carburettor Triumph models and is a direct replacement for the plastic top. No plastic vacuum take off tube to brake off.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

 

£29.95


 

 
Add to cart View cart
ID: J072 Mikuni Piston Spring
More information

Mikuni carburettor piston slide return spring. Replaces Triumph part number 1240040-T0301.

Diameter 9.5 mm. 97 mm long. For all Mikuni carburettors used on Triumph models.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

 

£4.95


 

 
Add to cart View cart
ID: J076 Mikuni float needles x 3
More information

Set of x3 Viton tipped float needles to fit Mikuni carburettors. These do not fit Keihin carburettors. If the carburettors are flooding, before changing the float needles, check that the two 'O' rings on the float holder (where it pushes into the main carburettor body) have not hardened with age. Triumph recommend that after fitting new float needles the float heights should be checked and set at 14.5 mm. With the carburettors inverted and the floats resting, measure from the float chamber joint face to the top of the float, this should be 14.5 mm.

We stock seal kits for Mikuni and Keihin carburettors.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£19.95


 

 
Add to cart View cart
ID: J078 Mikuni float needles x 4
More information

Set of x4 Viton tipped float needles to fit Mikuni carburettors. These do not fit Keihin carburettors. If the carburettors are flooding, before changing the float needles, check that the two 'O' rings on the float holder (where it pushes into the main carburettor body) have not hardened with age. Triumph recommend that after fitting new float needles the float heights should be checked and set at 14.5 mm. With the carburettors inverted and the floats resting, measure from the float chamber joint face to the top of the float, this should be 14.5 mm.

We stock seal kits for Mikuni and Keihin carburettors.

1000/1200 Daytona, 1200 Trophy

 

£24.95


 

 
Add to cart View cart
ID: J080 Mikuni carburettor seal overhaul kit
More information

Float chamber seal and x 5 O-rings. All seals are manufactured from DuPont Viton to resist damage from ethanol. Float O-rings (2), pilot screw and carburettor vacuum take off O-rings. Now also with the slide block base O-ring, which we normally leave untouched and x 2 new float chamber cover screws. We know it says in all the manuals never do it, but in the real world a piece of fuse wire can be pushed through the pilot jet and pilot air screw hole, compressed air often doesn't clear the jets if blocked. It's common for the two float O-rings to harden and cause over fuelling problems. When refitting the float assembly into the carburettor body with the new O-rings, use a little lubrication on the new O-rings such as WD40. Fitting instructions included.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems, but unfortunately carburettor rebuilds in the future may well be more frequent as the percentage of ethanol increases in pump fuels. If the bike is not to be used for a long period, it's a good idea to drain the fuel from the fuel tank and carburettors.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£12.95


 

 
Add to cart View cart
ID: J084 Mikuni Carburettor Super Repair Kit
More information

Repair kit includes: Float chamber seal, x 5 0-Rings, Viton tipped float needle, pilot air screw (with spring and washer) and x 2 float chamber screws. All seals are Viton. Fitting instructions included.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£21.95


 

 
Add to cart View cart
ID: J085 Mikuni Pilot Air Screw assembly x 3
More information

Replacement pilot air screw assembly (x 3 sets) for Mikuni carburettors used on Triumph models. This screw is on the underside at the front of the carburettor. Original screws are stainless steel and suffer badly from seizing in the die cast alloy caburettor body. These replacement screws are now manufactured from electro plated brass, a much more appropriate material for this application.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£11.95


 

 
Add to cart View cart
ID: J088 Mikuni Fuel Feed T-Piece Seals (set of 4)
More information

Set of x 4 Viton seals for the fuel feed inlet T-piece. These fit into the carburettor body on each end of the Mikuni fuel feed T-piece. Make suure when rebuilding the carburettors that the filter on the inlet side of the T-piece is cleaned (with carburettor cleaner spray) as this can restrict fuel flow if partially blocked.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£7.95


 

 
Add to cart View cart
ID: J090 Mikuni Float Chamber Seal Gasket
More information

Viton Mikuni float chamber seal.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£5.95


 

 
Add to cart View cart
ID: J093 Keihin Float Needle (3 Cylinder Models)
More information

Keihin Viton tipped float needle x 3.  Made in Japan

Where Keihin carburettors are fitted, it fits: Adventurer from VIN 62507, Legend, Sprint 900 from VIN 55881, Sprint Sport, Thunderbird 900 from VIN 62393, Thunderbird Sport and Tiger 900 from VIN 55616.

£29.95


 

 
Add to cart View cart
ID: J097 Keihin carburettor seal rebuild kit
More information

Keihin rebuild kit with Viton float chamber seal and pilot air screw assembly.

Fits: all carburettor Bonneville, T100, Speedmaster, Thruxton, America and Scrambler.  Adventurer from VIN 62507, Legend, Thunderbird 900 from VIN 62393, Thunderbird Sport, Tiger 900 from VIN 55616, Sprint 900, Sprint Sport, Trident and Trophy from VIN 55881.

 

 

£9.95


 

 
Add to cart View cart
ID: J129 Trident/Trophy/Sprint/Daytona 900 K & N air filter element
More information

Fits all carburettor 3/4 cylinder models. (Not Thunderbird/Legend/Adventurer). Open up the original box and fit this filter inside. Can be cleaned and reoiled at service intervals - used again and again.

750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, 900 Tiger (carburettor model)

£58.95


 

 
Add to cart View cart
ID: J131 Seperate K & N air filters to fit 3 cylinder models (Mikuni carburettor)
More information

For Mikuni carburettor models, a set of 3 separate K&N air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The K&N filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Speed Triple, 750/900 Trident, 900 Trophy, Tiger 900, Sprint 900, Sprint Sport, Sprint Executive, 750/900 Daytona

£147.00


 

 
Add to cart View cart
ID: J132 Seperate K & N air filters to fit 3 cylinder models (Keihin carburettors)
More information

For Keihin carburettor models, a set of 3 separate K&N air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The K&N filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Trident, Trophy 900, Sprint 900, Sprint Sport, Tiger 900, 

£145.00


 

 
Add to cart View cart
ID: J133 Seperate air filters to fit 3 cylinder models (Mikuni carburettor)
More information

For Mikuni carburettor models, a set of 3 separate air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Speed Triple, 750/900 Trident, 900 Trophy, Tiger 900, Sprint 900, Sprint Sport, Sprint Executive, 750/900 Daytona

£49.00


 

 
Add to cart View cart
ID: J134 Seperate air filters to fit 3 cylinder models (Keihin carburettors)
More information

For Keihin carburettor models, a set of 3 separate air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Trident, Trophy 900, Sprint 900, Sprint Sport, Tiger 900, 

£49.00


 

 
Add to cart View cart
ID: J135 Clutch cover breather filter (K & N) for use when separate air filters are fitted
More information

K&N breather filter to fit on the end of the clutch cover vent pipe when changing the large Triumph air box with separate K&N or similar filters.

£28.95


 

 
Add to cart View cart
ID: J139 Filtrex Oil Filter Trident, Trophy, Daytona, Sprint, Tiger, Thunderbird
More information

Filtrex oil filter to fit 750/900 Trident, Trophy 900/1200, Speed Triple 750/900, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model), 750/900/1000/1200 Daytona, Thunderbird 900, Thunderbird Sport, Legend TT and Adventurer.

Filtrex have not supplied Triumph, but they supply many original equipment manufacturers.

£4.00


 

 
Add to cart View cart
ID: J140 Meiwa Oil Filter Trident, Trophy, Daytona, Sprint, Tiger, Thunderbird
More information

Meiwa OE quality oil filter and supplied with x 2 O-rings. The Japanese Meiwa company supplied the original equipment oil filters to Triumph when the Tridents, Trophy and Speed Triples were new. The packaging today has ‘Japanese Technology’ on the box, so it’s our guess that they are no longer manufactured there, but they still look a quality product.

Firs: 750/900 Trident, Trophy 900/1200, Speed Triple 750/900, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model), 750/900/1000/1200 Daytona, Thunderbird 900, Thunderbird Sport, Legend TT and Adventurer.

 

£7.95


 

 
Add to cart View cart
ID: J141 O-Rings For Oil Filters Trophy, Trident, Daytona 900/1200, Thunderbird 900
More information

2 'O' ring seals with 14 mm drain plug (13 mm spanner size) washer to fit all 3 and 4 cylinder carburettor models.

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Sprint, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 900 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer

1991-94 bikes normally use part number J142

£2.75


 

 
Add to cart View cart
ID: J142 Oil Filter O-Rings and Sump Plug Washer Trident Trophy
More information

For 1991 - 94 only models (check before ordering) 2 'O' ring seals with 22 mm drain plug (12 mm hex. key size) washer to fit all 3 and 4 cylinder carburettor models.

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Trident Sprint, 900 Speed Triple and 900 Tiger. Thunderbird 900 up to VIN 32090

This is for 1991-94 bikes only .If your bike has the first type 22 mm drain plug (undone with a 12mm hex. key). Most models use the 14 mm (13 mm spanner size) part number J137.

£2.85


 

 
Add to cart View cart
ID: J189 Sump plug washer 14 mm
More information

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.

£1.45


 

 
Add to cart View cart
ID: J190 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.

£5.95


 

 
Add to cart View cart
ID: J191 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.

Contact Us For Details


 

 
View cart
ID: J954 Air Filter Pipercross 750/900 Trident, 900/1200 Daytona
More information

Pipercross performance air filter element to fit 750 Trident, 900 Trident, 900 Tiger (carburettor), 750 Daytona, 900 Daytona, 1000 Daytona, 1200 Daytona, 750 Speed Triple, 900 Speed Triple, 900 Trophy and 1200 Trophy. Made in UK.

£38.95


 

 
Add to cart View cart
ID: K702 Right Crank Cover Gasket
More information

Right crank cover gasket fits all 3 and 4 cylinder carburettor models, except Thunderbird range (see ID 808).  The crank trigger (ignition pick up) coil is located under this cover.

£3.49


 

 
Add to cart View cart
ID: K704 Clutch Cover Gasket
More information

Clutch cover gasket to fit all 3 and 4 cylinder carburettor models.

£4.25


 

 
Add to cart View cart
ID: K801 Gasket Set Engine Covers Trident, Trophy 900, Speed Triple 900, Daytona 900
More information

9 piece gasket set to fit Speed Triple 750/900, Trophy 900, Trident 750/900, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model) and Daytona 900. Clutch cover, sump, sprocket cover, right side crank cover, balancer cover, left side crank cover, water inlet pipe, water outlet pipe and cam chain tensioner gaskets.

£23.00


 

 
Add to cart View cart
ID: K804 Gasket and Seal Set Trident. Trophy 900, Daytona 900
More information

Gasket and seal set to fit Speed Triple 750/900, Trophy 900, Trident 750/900, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model) and Daytona 900.

Gaskets - clutch cover, sump, sprocket cover, right side crank cover, balancer cover, left side crank cover, water inlet pipe, water outlet pipe and cam chain tensioner gaskets.

Seals - Clutch pushrod, gearshaft, oil pump feed, sump, output shaft, oil filter x 2, alternator, starter motor, water pump, sump external oil pipe washers, sump plug washers and exhaust seals.

£69.00


 

 
Add to cart View cart
ID: K805 Cover and Head Gasket Set Trident. Trophy 900, Daytona 900
More information

Gasket (including genuine Triumph head gasket) and seal set to fit Speed Triple 750/900, Trophy 900, Trident 750/900, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model) and Daytona 900.

Gaskets - clutch cover, sump, sprocket cover, right side crank cover, balancer cover, left side crank cover, water inlet pipe, water outlet pipe and cam chain tensioner gaskets.

Seals - Clutch pushrod, gearshaft, oil pump feed, sump, output shaft, oil filter x 2, alternator, starter motor, water pump, sump external oil pipe washers, sump plug washers and exhaust seal

Kit now includes cam cover seal set (not shown in picture), but does not contain valve stem seals.

£145.00


 

 
Add to cart View cart
ID: K850 Sprocket Cover Seal Kit Trident, Trophy, Sprint, Tiger 900
More information

Kit to stop oil leak. Normally just the clutch pushrod seal is leaking, but a new gasket is required to do the job and changing the gear shaft seal while the sprocket cover is off is a good idea. Sprocket cover gasket, clutch push rod seal and gear shaft oil seal to fit 750/900 Trident, Trident Sprint, Sprint 900, Sprint Executive, Sprint Sport, Tiger 900 (carburettor), Trophy 900, Trophy 1200 (all silver and grey engine), Speed Triple 750/900, Daytona 900/1200.

£11.95


 

 
Add to cart View cart
ID: K854 Crank Cover Gasket Left Trident, Thunderbird, Daytona 900
More information

Left side crank cover gasket to fit Trident 750/900, Daytona 750/900, Trophy 900, Tiger 900 (carburettor), Speed Triple 750/900, Thunderbird 900, Thunderbird Sport, Adventurer, Legend, Trident Sprint, Sprint 900, Sprint Sport, Sprint Sport and Sprint Executive. 

£3.25


 

 
Add to cart View cart
ID: K860 Spacers For Cylinder Head Gasket
More information

x 2 spacer gaskets used when renewing cylinder head gasket - enough for a 3 cylinder engine and if carefully cut in half to give a horse shoe shape enough for a 4 cylinder engine as well. These are fitted on the exhaust side of the cylinder head between the cylinders.

Fits: Adventurer, 750/900/1000/1200 Daytona, Legend, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport,Tiger 900 (carburettor), Thunderbird 900, Thunderbird Sport, 900/1200 Trophy

£3.95


 

 
Add to cart View cart
ID: K910 Cam cover seal set carburettor 3 Cylinder Models
More information

Cam cover and cam cover screw seal set for all carburettor 3 cylinder models.

£24.95


 

 
Add to cart View cart
ID: L446 Tiger 1050 Kappa top rack.
More information

Complete kit including top plate to enable fitting of a Givi/Kappa monokey box. Excellent value. Shown here with Givi V46 box fitted (Available to order).

£69.00


 

 
Add to cart View cart
ID: M021 Tiger 900 and Trident Mirror
More information

Original equipment mirror fitted to all Tiger 900 (carburettor) models and Trident 750/900 up to VIN 4901. For left or right side. Can be fitted to all Triumph models that have a 10 mm threaded mirror fitting point. Made by Busch & Muller in Germany. Quality product.

£29.95


 

 
Add to cart View cart
ID: S029 Top Fork Yoke Nut Polished Stainless Steel
More information

Stainless steel polished top fork yoke nut. Replaces Triumph part number 2040060-T0301.

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Daytona 750/900/1000/1200, Legend TT, Rocket III, Classic, Roadster, Touring, Speed Four, Speed Triple 750/900, Speedmaster, Sprint 900, Sprint Executive, Sprint Sport, Sprint ST 955, Sprnt RS 955, Thruxton 900, Thunderbird 900, Thunderbird Sport, Tiger 900 carb and EFI, Tiger 955, Trident 750/900, Trophy 900/1200 and TT600.  

£19.95


 

 
Add to cart View cart
ID: S063 Replacement chromed fork tubes to fit most models
More information

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.

Model ?:
£99.00


 

 
Add to cart View cart
ID: S304 Steering head bearing set.
More information

Koyo taper roller bearings top and bottom with built in seals.

Fits all models up to vin 43916. These are all early steel frames.

Tiger 900,Thunderbird 900, 750/900 Trident, 750/900/1000/1200 Daytona, Sprint 900, 750/900 Speed Triple and 900/1200 Trophy.

Also fits Rocket 3 Classic, Touring and Roadster.

£29.00


 

 
Add to cart View cart
ID: S305 Steering head bearing set.
More information

Koyo taper roller lower and circlip ballrace upper bearing with built in seals.To fit all 750/900/1200 steel frame models after vin number 43916 and 900/955 inje...

£25.00


 

 
Add to cart View cart
ID: S501 Replacement fork seals (priced per pair)
More information

43 mm fork seals to fit Kayaba forks. These are very high quality seals, now with sprung lips on both the top and bottom of the each seal (see picture 2). .This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. If in doubt just state the model of bike and VIN number when ordering. These fit Trident 750/900, Trophy 900/1200, all Sprint 900, all Daytona 750/900/1000/1200, all Sprint Sport, all Sprint Executive, all 750/900 Speed Triple, Thunderbird Sport,

Fit Thunderbird and Adventurer up to VIN43509. Will also fit Thunderbird, Adventurer and Legend after VIN 92814.

Fit Trophy up to VIN 42274. Will also fit Trophy from VIN 96152 to VIN 98479.

Fit Trident up to VIN 44301.

Fit Tiger 900 (carburettor model) up to VIN 43523

£10.95


 

 
Add to cart View cart
ID: S502 Replacement fork seals (priced per pair)
More information

43 mm fork seals to fit Showa forks. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. Just state what bike you have when ordering. NOW WITH LATEST DOUBLE SPRUNG LIP DESIGN. These fit all Sprint ST 955, all Sprint RS and all Sprint ST 1050. They also fit (please check VIN numbers) Trophy900/1200, Trident, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, Tiger 1050, Tiger Sport, Speed Triple 1050 up to VIN 461331 

Thunderbird, Adventurer and Legend after VIN 43510 and up to VIN 92814.  

Trophy after VIN 42275 except from VIN 96152 to VIN 98479.

1050 Speed Triple up to VIN 461331

Trident after VIN 44302.

Tiger 900 after VIN 43524

Sprint RS and ST 955

Sprint 1050, Sprint GT,

Tiger 1050 and Tiger 800 range.

Tiger 900 (injection) and 955 Tiger

£10.95


 

 
Add to cart View cart
ID: S615 Fork bush set, 43mm Kayaba
More information

Ptfe coated top and bottom bush set to fit Kayaba 43mm forks used on Trident, Trophy, Sprint, Speed Triple, Daytona, Tiger, Thunderbird, TT600 and Daytona 600/650.  Triumph have used Kayaba and Showa as fork suppliers, sometimes with both types used on the same series of bike model. If possible please check before ordering or supply the vin number. The Kayaba forks use 20mm wide (actually 19.85mm) bottom bushes and as supplied from new have a smooth looking dust seal, with no spring showing. This kit consists of 4 bushes.

 

 

£28.00


 

 
Add to cart View cart
ID: S616 Fork bush set Showa
More information

Fork bush set for 43 mm Showa forks. Check before before ordering you have Showa forks. Showa forks use 15mm wide (actually 14.85mm) bottom bushes and are fitted with a dust seal with a spring showing around the sealing lip. Another important identifying feature is the outside size of the oil and dust seals which is 54 mm. The kit consists of 4 bushes.

Adventurer, Legend, Sprint RS, Sprint ST 955, Sprint ST 1050, Sprint GT, Trident 750/900, Trophy 900/1200, Thunderbird 900

£36.00


 

 
Add to cart View cart
ID: SD540 Thunderbird & Tiger drag link bearing kit (rear shock pivot point)
More information

Hardened sleeve, needle roller bearing and 2  seals. This just replaces the bearing assembly rear suspension pivot point on Thunderbird 900, Thunderbird Sport, Legend and Adventurer. Also fits Tiger 900 (carburettor models).

£23.00


 

 
Add to cart View cart
ID: SD541 Thunderbird & Tiger drag link bearing kit
More information

Complete drag link bearing, hardened sleeve and seal kit. This fits Thunderbird 900, Thunderbird Sport, Legend,  Adventurer and Tiger 900 (carburettor models).

£75.00


 

 
Add to cart View cart
ID: TA735 Clutch Push Rod Oil Seal
More information

Clutch pushrod seal located in the main crankcases under the sprocket cover. With the sprocket cover and pushrod removed the existing seal can be removed/ hooked out and the new seal pushed in. This is the most commonly sold seal as this type of seal prefers rotary motion and not the cross sliding movement of the clutch push rod. When refitting the clutch push rod, it's a good idea to reverse fit the rod, to give a new bearing area for the seal. Fits all hydraulic clutch models.

£4.50


 

 
Add to cart View cart
ID: TA737 Gear Change Shaft Oil Seal
More information

Outer oil seal on the gear change shaft on vitually all Triumph models. The existing seal can be very carefully hooked out and a new seal fitted. On models with a removable cover it's better to remove the cover to do the job. When fitting the seal back onto the splined gear shaft, it's good to cover the spline with tape to protect the seal inner.

Fits: TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, T509, 955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, Tiger 900/955/1050, Thunderbird 900, Thunderbird Sport, Adventurer, Legend TT.  Fits all the Bonneville range up to VIN 372312, Bonneville, T100, Thruxton, Scrambler, Speedmaster and America.

£4.30


 

 
Add to cart View cart
ID: TA740 Gearbox Output Shaft Seal. Replaces Triumph T3600112
More information

Gearbox output shaft HTC directional oil seal (anticlockwise for all these models - not suitable for the Bonneville engines as they use a clockwise directional seal) fits T509, T595, 955 Daytona, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint GT, 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor and injection), 955 Tiger, 1050 Tiger, Thunderbird, Thunderbird Sport, Adventuer, Legend, Trident Sport, Sprint 900, Sprint Sport and Sprint Executive.

Replaces Triumph T3600112     

 

£4.95


 

 
Add to cart View cart
ID: TA745 Oil Seal Valve Stem. Replaces Triumph 3600004-T0301
More information

Brown valve stem seal sold individually. 5.5 mm valve stem size. Fits Bonneville, SE, T100, Speedmaster, America, Scrambler, Thruxton, Rocket 3, Classic, Roadster, Touring, Adventurer, Thunderbird, Thunderbird Sport, Legend, 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, T595, 955 Daytona (up to VIN 132512), T509, 955 Speed Triple (up to VIN 141871) , 955 Sprint ST and RS (up to VIN 139276), Thunderbird 1600/1700, Thunderbird Storm, LT, Tiger 900 (carb and EFI), 955 Tiger

Replaces Triumph 3600004-T0301

 

 

 

 

£3.95


 

 
Add to cart View cart
ID: TA864 Seal for cam cover screw (Black) twin lip
More information

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.

£1.99


 

 
Add to cart View cart
ID: TB568 Rear Suspension Bearing 900 Tiger
More information

Bottom Rear shock absorber bearing and seals to fit 900 Tiger (carburettor model)

£16.50


 

 
Add to cart View cart
ID: Z124 PVL ignition coil single outlet
More information

PVL ignition coil to fit all carburettor 3 cylinder models. Can also be used to replace Gill ignition coils used on America, Speedmaster and Scrambler. The original push fit plug leads also fit the replacement coils. After pulling back the rubber plug lead boot on the coil outlets, just pull the lead out of the original coil and push into the replacement coil.  Made in Germany and sold out of USA as Nology.

This is exactly the same as Triumph 1290007-T0301 and also replaces Triumph T1290046

Will fit  750/900 Trident, 900 Trophy, 750/900 Speed Triple, 900 Tiger (carburettor), 750/900 Daytona, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Legend, Thunderbird, Thunderbird Sport, Adventurer, America, Speedmaster and Scrambler

£49.95


 

 
Add to cart View cart
ID: Z125 Single Outlet Coil PVL Copy
More information

Excellent replacement for both Gill and PVL single outlet coils. This is actually a copy of the PVL ignition. coil. It will fit all carburettor 3 cylinder models and can also be used on carburettor Speedmaster, Scrambler and America. There are 2 ignition coils used  on these models. The original push fit plug leads also fit the replacement coils. After pulling back the rubber plug lead boot on the coil outlets, just pull the lead out of the original coil and push into the replacement coil. Replaces 1290007-T0301 and also replaces Triumph T1290046

Will fit  750/900 Trident, 900 Trophy, 750/900 Speed Triple, 900 Tiger (carburettor), 750/900 Daytona, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Super III, Legend, Thunderbird, Thunderbird Sport, Adventurer, America, Speedmaster and Scrambler.

£24.95


 

 
Add to cart View cart
ID: Z272 NGK DPR8EA-9 spark plug
More information

Original equipment NGK DPR8EA-9 spark plug for 900/955 Tiger, Bonneville 800/865, Scrambler, America, Speedmaster, Thruxton, 750/900/1000/1200 Daytona, 750/900 Trident,  750/900 Speed Triple, Thunderbird 900, Legend TT, Adventurer, Thunderbird Sport,  900/1200 Trophy,  955 Sprint RS/ST up to vin 139276, T509 Speed Triple, 955 Speed Triple up to vin 141871, T595 Daytona, 955 Daytona up to vin 132512

£3.50


 

 
Add to cart View cart
ID: Z293 NGK DPR9EA-9 Spark Plug
More information

Cooler running than the recommended standard 8 grade NGK spark plug. Better when the ambient temperature is very high or the engine has been modified with higher compression pistons. Engine may be slightly more difficult to start but run cooler.

£3.50


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z380 Plug lead set 3 cylinder. Trident, Trophy, Sprint 900, Tiger 900
More information

Set of 3 plug leads to fit 750/900 Trident, 900 Trophy, 750/900 Daytona, 750/900 Speed Triple, Tiger 900, Sprint 900, Sprint Sport and Sprint Executive. 

Just for reference coil lead colours.

Positive coil terminals

all red. 

Negative coil terminal

Nr. 1 green/grey  

Nr. 2 yellow/green 

Nr. 3  brown/cream

      

 

 

Contact Us For Details


 

 
View cart
ID: Z385 Plug lead 225mm
More information

Plug lead number 3 : 750/900 Trident, 900 Trophy, 750/900 Speed Triple, 750/900 Daytona, Tiger 900, Spint 900, Sprint Sport and Sprint Executive.

Plug lead number 1 and 3 : Thunderbird 900, Legend, Thunderbird Sport and Adventurer.

Plug lead number 2 : Trophy 1200, Daytona 1000 and Daytona 1200.

Lead will fit PVL and Gill coils.

Number 1 cylinder is on the left when seated on the bike.

 

Contact Us For Details


 

 
View cart
ID: Z396 Trigger coil / crank position sensor (PVL) Trident, Trophy, Sprint 900
More information

 Crank position sensor manufactured by PVL, fits all 3/4 cylinder early models Tridents, Daytona 750/900/1000/1200, all Trophy models, Speed Triple 750/900, Tiger (carburettor), Sprint 900, Sprint Sport and Sprint Executive. Supplied with gasket and replaces existing PVL or Gill part.

Replaces Triumph 1290009-T0301 and T1290022

£49.95


 

 
Add to cart View cart
ID: Z420 Alternator Cush Rubbers
More information

Alternator cush drive rubbers. Supplied as a set of 4.

Fit Daytona 750/900/1000/1200, Daytona T595, Daytona 955 up to vin 132512, Speed Triple 750/900, Speed Triple T509, 955 Speed Triple up to vin 141871, Sprint 900, Trident Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST and RS up to vin139276, Trident 750/900, Trophy 900/1200, Tiger 900 (carb), Tiger 900 (injected), Legend, Thunderbird 900, Thunderbird Sport, Adventurer

£11.95


 

 
Add to cart View cart
ID: Z421 Indicator/Flasher Relay 3 pin (Original and LED Indicators)
More information

Quality European manufactured replacement 3 pin/connector indicator relay to fit all models. Like the original units, it also has a hazard function for models with a switch fitted.

This unit is also excellent with most LED indicators. Unlike the original incandescent bulbs, LED lamps are polarity sensitive.

Fits:Adventurer, Thunderbird 900, Thunderbird Sport, Legend, TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Trophy 900/1200, Sprint 900, Sprint Sport, Sprint Executive, T509, T595, 955 Speed Triple, 1050 Speed Triple (up to VIN 735336), 955 Daytona, Tiger 900 Carb and EFI, Tiger 955, Rocket III, Classic, Roadster, Sprint ST 955 and  Sprint RS. 

Fits all the Bonneville range carburettor models, Thruxton, T100, America, Speedmaster and Scrambler. Also fits EFI Bonneville range up to VIN 521668.

£11.95


 

 
Add to cart View cart
ID: Z422 Hella flasher relay
More information

Genuine Hella replacement indicator relay for original 10w bulbs. (A few export markets and the Thunderbird 900 range use 21w).

Fits:TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Trophy 900/1200, Sprint 900, Sprint Sport, Sprint Executive, T509, T595, 955 Speed Triple, 1050 Speed Triple, 955 Daytona, Tiger 900 Carb and EFI, Tiger 955, Rocket III, Classic, Roadster, Sprint ST 955 and  Sprint RS. 

Fits all the Bonneville range carburettor models, Thruxton, T100, America, Speedmaster and Scrambler. Also fits EFI Bonneville range up to VIN 521668.

Made in Germany.

£19.95


 

 
Add to cart View cart
ID: Z431 Starter Solenoid
More information

Fits: 750/900 Trident, 750/900/1000/1200 Daytona, T595, 955 Daytona, T509, 955 Speed Triple, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST, 955 Sprint RS, Tiger 900, Tiger 955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, TT600, Speed Four, Daytona 600, Daytona 650, Bonneville 800/865, T100, Thruxton, Scrambler, America, Speedmaster,

£19.95


 

 
Add to cart View cart
ID: Z440 Neutral switch up to VIN 45236
More information

Pin connector neutral switch fits all models up to VIN 45136

Fits Trident 750/900, Trophy 900/1200, Daytona 750/900/1000/1200, Speed Triple 900, Sprint 900, Tiger 900 (carburettor)

£14.95


 

 
Add to cart View cart
ID: Z443 Neutral switch from VIN 45238
More information

Spade connector style neutral switch to fit from VIN 45138.

Fits, Trident 750/900, Trophy 900/1200, Daytona 900/1200, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955, Sprint ST 1050, Sprint GT, Sprint 955 RS, T595, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, Speed Triple R, Tiger 900, Tiger 955, Tiger 1050, Tiger Sport, TT600, Speed 4, Daytona 600/650

£14.95


 

 
Add to cart View cart
ID: Z585 Cam chain tensioner spring
More information

Replacement cam chain tensioner spring. It is recommended that the spring is replaced if its length has reduced significantly below 73.7mm. This is a much more cost effective option than replacing the complete tensioner assembly. To change the spring, acces by removing the large central bolt. The tensioner does not have to be removed. Removing just the central bolt still allows the ratchet mechanism to retain the existing tension on the cam chain.

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955, Rocket III, Classic, Roadster & Touring, Legend, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955, 1050 Sprint ST, Thruxton, Thunderbird 900, Thunderbird Sport,Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, Tiger 1050, 750 & 900 Trident, Trophy 900 & 1200.

 

£12.95


 

 
Add to cart View cart
ID: Z595 Starter Motor Denso
More information

Denso starter motor ready to fit:

Adventurer, 750/900/1000/1200 Daytona, Daytona T595, 955 Daytona (up to VIN 132512), Legend TT, Speed Triple T509, 955 Speed Triple (up to VIN 141871), 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST (up to VIN 139276), 955 Sprint RS (up to VIN 139276), Tiger 900, Tiger EFI, Thunderbird 900, Thunderbird Sport and 750/900 Trident.

 

£169.00


 

 
Add to cart View cart
ID: Z596 Denso starter motor brushes
More information

1 pair of brushes fitted into holder/back plate to fit  all Denso starter motors.

Triumph have used Denso starter motors with Taigene starter motors being used normally on a few Thunderbird 900, Legend and Thunderbird Sport. A label showing the manufacturer with the Triumph part number was originally fitted.

Fits: Adventurer, 750/900/1000/1200 Daytona, Daytona T595, 955 Daytona (up to VIN 132512), Legend TT, Speed Triple T509, 955 Speed Triple (up to VIN 141871), 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST (up to VIN 139276), 955 Sprint RS (up to VIN 139276), Tiger 900, Tiger EFI, Thunderbird 900, Thunderbird Sport and 750/900 Trident.

£24.95


 

 
Add to cart View cart
ID: Z597 Starter motor brush and back plate set. Taigene
More information

Starter motor brush and back plate set to fit Taigene starter motors.

Triumph have used Denso starter motors with Taigene starter motors being used normally on a few Thunderbird 900, Legend and Thunderbird Sport. A label showing the manufacturer with the Triumph part number was originally fitted.

 

£26.95


 

 
Add to cart View cart
ID: Z598 Rebuild kit Denso starter motor
More information

Complete kit to rebuild a Denso starter motor.

Fits:Adventurer, Daytona 750,900,1000,1200, Daytona T595, Daytona 955 up to VIN 132513, LegendTT, Speed Triple 750,900, Speed Triple T509, Speed Triple 955 up to VIN 141872, Sprint 955 RS, Sprint 955 ST, Thunderbird 900, Thunderbird Sport, Tiger 900 carburettor and EFI, Trident 750,900 and Trophy 900,1200.

£53.95


 

 
Add to cart View cart
ID: Z701 Cam Cover Seal Set of 8 (3 Cylinder Carburettor Engines)
More information

8 cam cover screw seals to fit all 3 cylinder carburettor models. These bonded seals were known originally as Dowty seals.

TA864 x 8

£14.95


 

 
Add to cart View cart
ID: Z740 Dust Seals Front Wheel
More information

First line of defence for your wheel bearings, outer 'dust' seals are actually oil seals. This pair of front wheel seals are used on all carburettor 3/4 cylinder  models as well as 955 Sprint ST/RS and 955 Daytona/Speed Triple with 6 hole fixing front discs. Supplied as a pair.

£7.80


 

 
Add to cart View cart
ID: Z950 Relay side stand and headlights
More information

Side stand relayheadlamp relay. Also used as a headlight relay on carburettor twin headlamp models. When used as light relays, x 1 relay is used for low beam and another relay is used for high beam.

As headlight relays fits: 900/1200 Daytona, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor)

As side stand relay fits: Adventurer, 750/900/1000/1200 Daytona, Legend, Sprint 900, Sprint Executive, Sprint Sport, Speed Triple 750/900, Thunderbird 900, Thunderbird Sport, Trident 750/900, 900/1200 Trophy, 

£6.95


 

 
Add to cart View cart





 
eXTReMe Tracker