• View Basket
  • Checkout
  • Home Page


675


Show All

Quick Jump
Sort this list by
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID: B001 BRAKE PAD INFORMATION
More information

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.

Contact Us For Details


 

 
View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B056 4 piston front caliper seal kits for Nissin and Triumph calipers
More information

Fits all Nissin and Triumph front 4 piston calipers on all (Apart from Brembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. The piston seals are genuine Nissin parts as used as original equipment by Triumph. These seals are also used in the 1/2 Nym spec. Triumph calipers. Made in Japan.

Fits: 600/650/675/750/900/955/1000/1050/1200/2300

£22.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B193 Front brake reservoir container.
More information

Genuine Nissin front brake reservoir plastic pot used many Triumph models. This inclues the link pipe which fits some but no all models.

Fits  TT600, Speed Four, 600/650/675/955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955/1050 Speed Triple, Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT.

£19.99


 

 
Add to cart View cart
ID: B194 Angled inlet to master cylinder with seat/circlip kit
More information

Angled inlet to front brake reservoir used on most sports models. The 'O' ring seal and circlip are the same components used in the inlet to Nissin rear brake master cylinders. Genuine Nissin component. Made in Japan.

Fits TT600, Speed Four, 600/650//955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955 Speed Triple, 1050 Speed Triple (up to VIN 461331), Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT

£17.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B420 Caliper slider pin Street Triple, Thunderbird 900, Tiger 900/955
More information

Stainless steel replacement slider pin for Nissin retro/cruiser style 2 piston calipers.

Used on front only:

Bonneville, T100, SE, Bobber, T120, Scrambler, Speedmaster, Street Cup, Street Scrambler, Street Triple 675, Street Triple S, Street Twin, Thruxton 900, Thruxton 1200, Thunderbird Storm and Tiger 800 range.

Used on front and rear:

Adventurer, Legend TT, Thunderbird 900 and Thunderbird Sport.

 

£18.95


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B432 Brake Banjo Annealed Copper Washers 10 mm
More information

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.

£3.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B446 Piston Set 1/2 Nymfron
More information

Set of x 4 Nissin caliper pistons (x 2  30 mm pistons and x 2  34 mm Nymfron low friction pistons). Can be fitted to any Nissin/Triumph 4 piston caliper (not Brembo). Nissin only coat the 34 mm to reduce friction/drag. This was done to help eliminate the long lever travel problems.

£54.00


 

 
Add to cart View cart
ID: B448 Rear Caliper Piston and Seal kit 38 mm (pattern)
More information

Pattern caliper piston and seals to fit rear calipers on all sports twin sided swinging arm models.

Fits TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Street Triple, Daytona 955 (twin sided swinging arm model), Tiger 800, Tiger XC,

£24.00


 

 
Add to cart View cart
ID: B609 Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
More information

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600

£7.99


 

 
Add to cart View cart
ID: B810 Disc Bolt 10 mm shoulder 30 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,

£5.49


 

 
Add to cart View cart
ID: B902 Brake pad Armstrong Bonneville, Thunderbird 900, Tiger 800/955
More information

Armstrong semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper

£12.95


 

 
Add to cart View cart
ID: B914 Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£32.95


 

 
Add to cart View cart
ID: B915 Rear Brake Pads 675, TT600, Tiger 800, Street Triple
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£12.95


 

 
Add to cart View cart
ID: BE068 Front Wheel Bearings and Seals 675
More information

Koyo front wheel bearings x 2 and dust seals x 2.

Fits: Bonneville Bobber, T120, 675 Daytona, 675 Daytona R, Street Scrambler, Street Triple, Street Triple R, Thruxton (liquid cooled), Thruxton R (liquid cooled)

£22.95


 

 
Add to cart View cart
ID: BE070 Front Wheel Bearings 600/675/955
More information

x 2 Koyo front wheel bearings to fit

TT600, Speed Four, Daytona 600/650, Daytona 675, Street Triple, 955 Speed Triple from VIN 141872, 955 Daytona from VIN 132513,

£17.00


 

 
Add to cart View cart
ID: BE078 Wheel Bearing (Koyo) and dust seals Tiger 800, Tiger 955, TT600
More information

Japanese Koyo wheel bearings (sold as a pair with dust seals for x 1 wheel). Dust seals may not fit all models.

Fits FRONT WHEEL: all Rocket 3, Thunderbird 1600/1700, Tiger 800 range, Trophy 1215

Fits REAR WHEEL: Bobber, Bonneville T120, Daytona 600/650, Daytona, 675, Daytona 955 (dual sided swinging arm), Tiger 800, Tiger XC, Tiger 1050, Tiger 955 (cast wheel model), all Rocket 3, Speed Four, Speedmaster, Street Scrambler, Street Triple 675, Street Triple 765, TT600, Daytona 600/650, Sprint RS (twin sided swinging arm), Tiger 1050 , Thunderbird 1600/1700, Thruxton, Thruxton R

£23.95


 

 
Add to cart View cart
ID: BE082 Sprocket Carrier Koyo Bearing and Seal Tiger 800, 955
More information

Japanese Koyo sprocket carrier (cush drive) bearing and seal to fit:

Tiger 800, Tiger 800 XC

Tiger 955 (cast wheel)

Bonneville, T100, America, Speedmaster, Thruxton, Scrambler

TT600, Speed Four, Daytona 600/650

955 Sprint RS (twin sided swinging arm)

955 Daytona (twin sided swinging arm)

675 Daytona, Street Triple

 

£9.95


 

 
Add to cart View cart
ID: BE704 Valve Shims 7.5 mm 1.80 - 2.95
More information

7.5 mm valve shim.

Fits: Daytona 600/650, Daytona 675, Daytona 675 R, Speed Four, TT600, Street Triple, Street Triple R, Tiger 800, Tiger 800 XC, Tiger XR.

 

Size ?:
£3.95


 

 
Add to cart View cart
ID: C195 Lever Clamp/Mirror Support
More information

Replacement clamp/mirror support or new clamp for models with no mirror fixing. Used as original on clutch and front brake lever on 955/1050 Speed Triple, Speed Four, Thruxton, SE, Bonneville (from vin 380777), 955/1050 Tiger. Ideal to hold mirrors when converting Daytona 955/T595 to Speed Triple. 10mm threaded lever clamp used on many unfaired models for mirror fixing.  Made in Japan. 

Fits: Bonneville (from VIN 380777), SE, Scrambler, Speed Four, Speed Triple 955, T509, 1050 Speed Triple, Street Cup, Street Scrambler, Street Triple, Street Triple R, Street Twin, Thruxton 900, Tiger 1050

£9.95


 

 
Add to cart View cart
ID: C195 Lever Clamp/Mirror Support
More information

Replacement clamp/mirror support or new clamp for models with no mirror fixing. Used as original on clutch and front brake lever on 955/1050 Speed Triple, Speed Four, Thruxton, SE, Bonneville (from vin 380777), 955/1050 Tiger. Ideal to hold mirrors when converting Daytona 955/T595 to Speed Triple. 10mm threaded lever clamp used on many unfaired models for mirror fixing.  Made in Japan. 

Fits: Bonneville (from VIN 380777), SE, Scrambler, Speed Four, Speed Triple 955, T509, 1050 Speed Triple, Street Cup, Street Scrambler, Street Triple, Street Triple R, Street Twin, Thruxton 900, Tiger 1050

£9.95


 

 
Add to cart View cart
ID: C346 Clutch lever span adjustable
More information

Direct replacement for 675 Daytona, Street Triple 675, 1050 Speed Triple, Sprint ST 1050, Sprint GT, 1050 Tiger, Tiger Sport, Scrambler and Thruxton. Or upgrade on 600/650 Daytona, Tiger 800, Tiger XC, 955 Daytona and 955 Speed Triple both from vin. 186150>, , 

Only fits Tiger 800 range up to VIN 674842 and Tiger Sport up to VIN 750469.

£15.95


 

 
Add to cart View cart
ID: C347 Clutch lever 600/650/675/955 Daytona, Street Triple and 955 Speed Triple.
More information

Replacement lever for Daytona 600/650, 675 Daytona and Street Triple 675. Also fits Speed Four after vin 201642, 955 Daytona models from vin 186150. Late model single sided swinging arm 955 Sprint RS from vin 186151.

£11.50


 

 
Add to cart View cart
ID: C356 Front brake Tiger Explorer, Tiger 800
More information

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.

£14.95


 

 
Add to cart View cart
ID: C449 Front Brake Lever Daytona 675/ 1050 Speed Triple
More information

Replacement front brake lever to fit Nissin radial brake caliper model Daytona 675 and 1050 Speed Triple.

£14.99


 

 
Add to cart View cart
ID: CC765 Clutch cable Daytona 675
More information

Replacement clutch cable to fit Daytona 675 up to VIN 564947. Inner length 119cm. Outer length 107 cm  

£14.95


 

 
Add to cart View cart
ID: CS151 DID X-ring 525 chain and sprocket kit. Bonneville range/600/650/675
More information

DID VM2 X-ring gold chain and sprocket kit. Available for all Bonneville models, TT600, Speed Four, Daytona 675 and 675 Street Triple. Please state model when ordering. (525 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  

£119.00


 

 
Add to cart View cart
ID: CS154 DID X-ring gold chain 525
More information

Original equipment DID VX/VM2 X-ring gold 525 chain. Fits, TT600, Speed Four, Daytoina 600/650, 675 Daytona, 675 Street Triple, 800 Tiger and Tiger XC.

DID X Ring Gold 525:
£85.00


 

 
Add to cart View cart
ID: CS173 Tab Washer 675, 600 and 650 models
More information

Gearbox sprocket tab washer to fit: TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Daytona 675R, Street Triple, Street Triple R, Tiger 800 and Tiger 800XC. Replaces Triumph T1180328

£3.95


 

 
Add to cart View cart
ID: CS945 675 and 800 Gearbox Sprocket (525)
More information

Gearbox sprocket to fit Daytona 675, Street Triple, Tiger 800 and Tiger XC. Sizes available  14, 15 , 16 and 17 teeth.   (525 chain size)

Number of teeth ?:
£15.00


 

 
Add to cart View cart
ID: CS946 Rear Sprocket 675 and 800 (525)
More information

Rear sprocket to fit Tiger 800, Tiger XC, Daytona 675 and Street Triple available  in 47, 49 and  50 teeth. (525 chain size)

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS950 Chain Rivet Tool
More information

Replica DID chain rivet tool. This will push the rivet link together and neatly rivet the ends over. To separate an old chain or shorten a chain, grind the rivet ends one side of the link to be removed until the side plate is hit. Go slightly below the surface to be sure the rivetting is well ground away, then knock apart with a punch and hammer.

£39.95


 

 
Add to cart View cart
ID: D010 Front Discs Daytona 675, Street Triple, TT600 and Daytona 600/650
More information

x 2 replacement front discs to fit TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675 and Street Triple. Made in UK.

 

£249.00


 

 
Add to cart View cart
ID: D016 Rear Disc 220 mm T595, T509, 955 Daytona, 955 Speed Triple
More information

220 mm rear disc to fit TT600, Speed Four, Daytona 600, Daytona 650, T595, T509, 955 Daytona, 955 Speed Triple, 1050 speed Triple, 675 Daytona and Street Triple.

£69.00


 

 
Add to cart View cart
ID: EG930 Generator Stator 675 Daytona and Street Triple
More information

Generator/alternator with crank position sensor/trigger coil. The Electrex generator is a really excellent product and this is the latest deveopment. Previously we had advised customers to connect/reuse the original crank psition sensor as the original product always performs better. These new units from Electrex hopefully are a better and the crank sensor supplied works as well as original equipment. Fits all Daytona 675 up to VIN 564947 and Street Triple up to VIN 560476

£144.00


 

 
Add to cart View cart
ID: EL026 Headlamp rim to fit Speed Four,955/1050 Speed Triple, Rocket 3. .
More information

Chrome headlamp rim to fit all urban round twin headlight models. Speed Four, 675 Street Triple, T509/955/1050 Speed Triple and Rocket 3. Replaces Triumph T2700560 

Can also be used to replace the black headlight rim used on:Thunderbird Storm and Bonneville Bobber.

EL027 is a black version of this chrome rim.

£19.95


 

 
Add to cart View cart
ID: EL391 Headlight, twin replacement Speed Triple (Pair)
More information

Direct replacement flat glass symetrical dip/low beam light units with headlight bulbs and side light hole. Supplied as pairs, as the units although similar are not exactly the same as the originals.

Fits T509, Speed Triple 955, Speed Triple 1050, Speed Four, Street Triple

£69.00


 

 
Add to cart View cart
ID: EL405 Indicator left 1050 Speed Triple, 800 Tiger
More information

Left front or right rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£19.95


 

 
Add to cart View cart
ID: EL406 Indicator right 1050 Speed Triple, 800 Tiger
More information

Right front or left rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£19.95


 

 
Add to cart View cart
ID: EL407 Indicator Lens 675, 800, 1050
More information

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.

£4.95


 

 
Add to cart View cart
ID: EL408 Indicator stalk 675, 1050
More information

UV attacking the plastic stalk ? Bought a pattern indicator with incorrect stalk ? Broken indicator stalk ?  Here's the fix. This fits both oval and wedge style indicators, but will not fit the latest LED indicators originally offered as an option and now standard equipment on many models.

Indicator stalk to fit all Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675, 1050 Speed Triple, Tiger 1050, Tiger Sport, Tiger Explorer (rear), Daytona 600/650 and Sprint ST 1050 (rear).

 

 

£3.95


 

 
Add to cart View cart
ID: EL410 Indicator
More information

Right front and left rear indicator.

Fits: Daytona 600, Daytona 650, 675 Daytona up to VIN 381274 and 1050 Tiger up to VIN 483576.

£19.95


 

 
Add to cart View cart
ID: EL411 Indicator
More information

Left front, right rear indicator.

Fits: Daytona 600, Daytona 650, 675 Daytona up to VIN 381274 and 1050 Tiger up to VIN 483576.

£19.95


 

 
Add to cart View cart
ID: EX083 Exhaust studs steel, all 3 cylinder models
More information

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.

£9.95


 

 
Add to cart View cart
ID: EX085 Exhaust header stainless steel studs (priced each)
More information

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS

£3.95


 

 
Add to cart View cart
ID: EX097 Exhaust seal Daytona 675, Steet Triple and Tiger 800
More information

Set of x 3 exhaust seals. These are just the best quality exhaust header seals made for the first generation Daytona 675 (up to VIN 381274), Speed Triple 675 (up to VIN 560477) and all Tiger 800 models. Replaces Triumph T2200824

£12.95


 

 
Add to cart View cart
ID: F089 Gear change lever rubber
More information

These are very high quality gear change rubbers, which will outlast the original part. 41 mm long.

To Fit:

Sprint 900, Sprint Sport, Sprint Executive and Trident Sprint.

Speed Triple 750/900

Trophy 900/1200

Trident 750/900

Daytona 750, 900, 1000, 1200

Tiger 900 carburettor and injection (EFI)

Tiger 955

TT600 and Speed Four

Sprint 955 RS and 955 ST (up to VIN 139276)

Daytona T595 and 955 from VIN 87317 (one piece 'reverse' gear lever)

Speed Triple 955 from VIN 87317 (one piece 'reverse' gear lever)

£1.75


 

 
Add to cart View cart
ID: F168 Gear Change Rubber 675, 1050, Thruxton
More information

Gear change rubber to fit Thruxton, 675 Daytona, Street Triple, Tiger Sport, Tiger 1050, 1050 Sprint ST, Speed Triple 1050, Tiger Explorer, Tiger Explorer XC and Sprint 955 ST and RS from VIN 139277.

£1.95


 

 
Add to cart View cart
ID: F630 Cover/Boot Gear Change Ball Joint
More information

Gear change ball joint end pivot boot/cover. All models.

£2.95


 

 
Add to cart View cart
ID: G409 Front mudguard extender 675 Daytona and Street Triple
More information

675 Daytona up to VIN564974 and 675 Street Triple up to VIN560477

£19.99


 

 
Add to cart View cart
ID: H218 Haynes 675 Daytona and Street Triple Manual
More information

Haynes service and repair manual for the 675 range  (2006 to 2010). Daytona 675, Street Triple and Street Triple R.

£19.99


 

 
Add to cart View cart
ID: J017 Fuel Filler cap 600, 650, 675, 800, 955, 1050
More information

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509

£49.95


 

 
Add to cart View cart
ID: J185 Oil Filter OE Fits all Injected Models
More information

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600

£9.95


 

 
Add to cart View cart
ID: J187 Oil filter wrench 955/1050/Bonneville range
More information

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 

£12.95


 

 
Add to cart View cart
ID: J189 Sump plug washer 14 mm
More information

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.

£1.45


 

 
Add to cart View cart
ID: J190 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.

£5.95


 

 
Add to cart View cart
ID: J191 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.

Contact Us For Details


 

 
View cart
ID: J962 Air Filter Hiflofiltro 675 Daytona & Street Triple
More information

Replacement Hiflofiltro air fliter to fit all Daytona 675 and Street Triple up to VIN 564947

£18.95


 

 
Add to cart View cart
ID: J963 Air filter Pipercross for Daytona 675 and Street Triple.
More information

Pipercross performance air filter to fit Daytona 675 and Street Triple.

£47.95


 

 
Add to cart View cart
ID: J964 Air filter Pipercross Race only for 675 Daytona and Street Triple.
More information

Race only version Pipercross air filter to fit 675 Daytona and Street Triple.  Super low filter resistance element and more beautiful 3 cylinder air box roar.

£49.95


 

 
Add to cart View cart
ID: K903 675 Daytona and Street Triple Lower Engine Cover Gasket Set
More information

675 Street Triple and 675 Daytona lower engine cover gasket set.

Fits: Daytona 675 for years 2006-12 (up to VIN 564947) and all 675 Street Triples.

£9.95


 

 
Add to cart View cart
ID: K922 Cam Cover Seal 675 and 800 all models
More information

Cam cover seal and cam cover screw seal set to fit all Daytona 675, Street Triple 675 and Tiger 800 models.  Also fits: Street Triple S, Street Triple R and Street Triple RS 765 models. Fits all Street Triples from VIN 803572.

£24.95


 

 
Add to cart View cart
ID: K930 Daytona 675R Lower Engine Cover Gaskets
More information

675R Daytona from VIN 564948 lower engine cover gaskets.

£10.95


 

 
Add to cart View cart
ID: L260 675 Street Triple sports rack up to 2009
More information

675 Street Triple

£89.95


 

 
Add to cart View cart
ID: M878 Mirror clamp boot
More information

Black rubber replacement for perished original covers. Used on most unfaired models.

£3.95


 

 
Add to cart View cart
ID: S063 Replacement chromed fork tubes to fit most models
More information

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.

Model ?:
£99.00


 

 
Add to cart View cart
ID: S315 Steering Head Bearing Set 675, 800, 1050
More information

Taper roller steering head bearing set and seals to fit 1050 Sprint ST, 1050 Tiger, 800 Tiger, Tiger XC, Daytona 675 and Street Triple. All Balls brand.

£29.00


 

 
Add to cart View cart
ID: S495 Replacement fork seals (priced per pair)
More information

Top quality fork oil seals for 41 mm forks with double lipped spring sealing to fit Bonneville 800/865, T100, Scrambler, Thruxton and America. Also fits the upside down forks used on the 675 Daytona and 675 Street Triple. This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section.

£10.95


 

 
Add to cart View cart
ID: S637 Fork Dust Seals 41 mm
More information

Fork dust seals to fit 41 mm Showa forks. Fits Bonneville 800/865, T100, Thruxton, Scrambler, America, Speedmaster. Also fits the upside down forks used on the  675 Daytona and 675 Street Triple. Sold as a pair.

£12.95


 

 
Add to cart View cart
ID: TA737 Gear Change Shaft Oil Seal
More information

Outer oil seal on the gear change shaft on vitually all Triumph models. The existing seal can be very carefully hooked out and a new seal fitted. On models with a removable cover it's better to remove the cover to do the job. When fitting the seal back onto the splined gear shaft, it's good to cover the spline with tape to protect the seal inner.

Fits: TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, T509, 955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, Tiger 900/955/1050, Thunderbird 900, Thunderbird Sport, Adventurer, Legend TT.  Fits all the Bonneville range up to VIN 372312, Bonneville, T100, Thruxton, Scrambler, Speedmaster and America.

£4.30


 

 
Add to cart View cart
ID: TA738 Gear Change Shaft Seal. 675, 800, 1050, 1215 Replaces Triumph T3600088
More information

Gear change shaft seal used on all more recent and current models. Replaces Triumph T3600088

Fits: America (EFI from VIN 372713), Bobber, Bonneville& SE (from VIN  372713), T120, Daytona 675, 675R, Scrambler EFI (from VIN 372713), Street Triple 675, Street Triple 765 R, RS, S, Street Twin, Thruxton 900 EFI (from VIN 372713), Thruxton, Thruxton R, Thunderbird Storm, Tiger 1200 Explorer all, Tiger 800 all, Trophy 1215, SE

 

£3.25


 

 
Add to cart View cart
ID: TA741 Gearbox Output seal 675
More information

Output seal to fit all 675 and 800 models. 35mm x 62mm x 5mm .

Fits:Bonneville Bobber, T120, T120 black, Daytona 675, Daytona 675 R, Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S and RS, Thruxton 1200, Thruxton R, Tiger 800,

 

£5.95


 

 
Add to cart View cart
ID: TA864 Seal for cam cover screw (Black) twin lip
More information

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.

£1.99


 

 
Add to cart View cart
ID: Z132 Stick Ignition Coil 675 and 800 models
More information

Replacement ignition coil to fit all 675 Daytona, Street Triple, 800 Tiger and 800 Tiger XC

£59.00


 

 
Add to cart View cart
ID: Z276 NGK CR8EK and CR9EK spark plug
More information

Original equipment NGK CR8EK and CR9EK twin electrode spark plug to fit TT600, Speed Four, 600/650675 Daytona,  675 Street Triple, 675 Street Triple R, Tiger 800, Tiger 1050, Speed Triple 1050, 955 Speed Triple from vin 141872, Daytona 955 from vin 132513, Sprint RS/ST from vin139277

Plug type ?:
£8.99


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z423 Flasher relay 2 pin(including LED) Daytona 675, Street Triple Tiger 800
More information

Replacement 2 pin/connector flasher relay will work with original lamps (which have 10w bulbs). This unit is also excellent with most LED indicators. Unlike original incandescent bulbs, LED lamps are polarity sensitive.

Fits Daytona 675, Street Triple 675,Tiger 800, Tiger XC and Bonneville range with 2 pin relay fitted.

£12.00


 

 
Add to cart View cart
ID: Z587 Cam Chain Tensioner Spring 675 Daytona and Street Triple (Silver Coloured Tensioner)
More information

Replacement Cam Chain Tensioner Spring Kit - Triumph Street Triple, Street Triple R and Daytona 675

New Replacement Cam Chain Tensioner Spring complete with copper sealing washer for use in all Silver Coloured 675 cam chain tensioner housings.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 60mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly. 

Replacement of the spring requires only the 10mm hexagon headed bolt to be removed and the spring can then be replaced.  A very simple job.

  Fits: Daytona 675 up to VIN 381274 (last six digits of chassis number)

          Street Triple and Street Triple R up to VIN 493832

         Street Triple R models between VIN 503519 and 508231

£12.95


 

 
Add to cart View cart
ID: Z589 Cam Chain Tensioner Spring 675 Daytona, Street Triple, Tiger 800 and Explorer
More information

Replacement Cam Chain Tensioner Spring - Triumph Street Triple, Street Triple R, Daytona 675, Tiger 800 and Tiger 800XC

New Replacement Cam Chain Tensioner Spring for use in Black Coloured Hydraulic cam chain tensioner housings used on 675 Daytona and Street Triple after VIN 493832, Tiger 800 and Tiger 800XC

Also used on the Street Triple R after VIN 493832 apart from VIN 503519 to 508231 which have the silver coloured adjuster fitted.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 35mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly.

With this style of tensioner, it has to be removed to fit a new spring. There are x 2 spring clips on these tensioners. The rear spring in the tensioner slot if pulled together will allow the plunger to compress or be completely removed to change the spring.The front clip is used to hold the plunger fully in for reassembly. When the plunger is compressed, the front clip can be pulled together with long nose pliers to locate in the groove near the tip of the plunger.

£11.95


 

 
Add to cart View cart
ID: Z840 Plastic Fairing Panel Fasteners 675 Daytona
More information

x 10 plastic fairing fasterners to fit Daytona 675.

£5.95


 

 
Add to cart View cart





 
eXTReMe Tracker