• View Basket
  • Checkout
  • Home Page


Daytona T595, 955 > Show All
 

Daytona T595, 955


Show All

Quick Jump
Sort this list by
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID:

Contact Us For Details


 

 
View cart
ID: B001 BRAKE PAD INFORMATION
More information

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.

Contact Us For Details


 

 
View cart
ID: B005 Front Brake Master Cylinder Seal kit 14mm
More information

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)

£24.95


 

 
Add to cart View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B056 4 piston front caliper seal kits for Nissin and Triumph calipers
More information

Fits all Nissin and Triumph front 4 piston calipers on all (Apart from Brembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. The piston seals are genuine Nissin parts as used as original equipment by Triumph. These seals are also used in the 1/2 Nym spec. Triumph calipers. Made in Japan.

Fits: 600/650/675/750/900/955/1000/1050/1200/2300

£22.95


 

 
Add to cart View cart
ID: B057 Seal set 2 piston calipers
More information

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 

£14.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B193 Front brake reservoir container.
More information

Genuine Nissin front brake reservoir plastic pot used many Triumph models. This inclues the link pipe which fits some but no all models.

Fits  TT600, Speed Four, 600/650/675/955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955/1050 Speed Triple, Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT.

£19.99


 

 
Add to cart View cart
ID: B194 Angled inlet to master cylinder with seat/circlip kit
More information

Angled inlet to front brake reservoir used on most sports models. The 'O' ring seal and circlip are the same components used in the inlet to Nissin rear brake master cylinders. Genuine Nissin component. Made in Japan.

Fits TT600, Speed Four, 600/650//955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955 Speed Triple, 1050 Speed Triple (up to VIN 461331), Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT

£17.95


 

 
Add to cart View cart
ID: B225 Master cylinder piston outer boot (front)
More information

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy

£4.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B274 2 piston Nissin caliper pin boots
More information

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer

£8.95


 

 
Add to cart View cart
ID: B279 Rear brake master cylinder push rod
More information

Rear brake master cylinder rod with a choice of 52 mm, 45 mm or 38 mm of 8 mm x 1.25 pitch thread. This will fit many models and the thread can be cut for most models to shorten to the required length. 

Thunderbird 900, Legend, Adventurer, Thunderbird Sport, T595/955/600/650 Daytona, T509/955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, 955/1050 Tiger

Thread length ?:
£16.00


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B291 Rubber grease sachet
More information

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.

£1.75


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B389 Uprated Nissin front brake master cylinder
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore remote pot sports master cylinder.

Dark grey finish on master cylinder.

£135.00


 

 
Add to cart View cart
ID: B399 Uprated Nissin front brake master cylinder (black)
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore. Remote pot reservoir sports style master cylinder. 

Black finish on master cylinder

 

 

£145.00


 

 
Add to cart View cart
ID: B418 Nissin brake pad locator
More information

The 2 piston Nissin caliper used on the rear of many models and  retro front calipers. The caliper moves on slider pins when the brake is applied. The outer brake pad has a hook located in this brake pad locator nut which is screwed onto one of the slider pins. Manufactured from stainless steel. (See slider pins listed below, also in stainless steel).

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, 955 Sprint RS (single sided swinging arm model),

Made in UK

£11.95


 

 
Add to cart View cart
ID: B419 2 piston caliper slider bracket pins (pair)
More information

Stainless steel replacemet pins for the 2 piston (on one side) calipers used  on the rear of most models and front of  very early Trophy, Sprint, and Trident models. The used bracket assembly is shown for reference only to help illustrate pin location.

These fit the front calipers of the following: 750/900 Trident, Tiger 900 (carburettor models), 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fits the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster

 

£19.95


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B432 Brake Banjo Annealed Copper Washers 10 mm
More information

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.

£3.95


 

 
Add to cart View cart
ID: B433 Disc bolt
More information

Plated steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder. The plating isn’t as good as original parts, but the steel is excellent and less prone to chewing up with the hex key.

Fits front and rear on 750/900 Trident, 900/1200 Trophy, 750/900/1000/595/955/1200 Daytona, 750/900/T509/955/ Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, Sprint RS,

Fits front only on T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

£1.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B437 Caliper piston 34mm (4 piston caliper)
More information

Larger 34mm diameter trailing piston used in Nissin and ''Triumph'' 4 piston type calipers. Fitted to the front of all Daytona models (up to the use of radial calipers), 900/955 Sprint, Trophy and 900/955 Speed Triples etc.  The pistons are 22.5 mm long. These are genuine Nissin pistons made in Japan.

To fit front calipers on 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955/1050 Sprint ST, RS, T509, 955 Speed Triple, T595, 955 Daytona, TT600, Speed 4, 600/650 Daytona, Rocket 3,

 

£19.00


 

 
Add to cart View cart
ID: B438 Caliper piston 30mm (4 piston calipers)
More information

Nissin 4 piston calipers have 2 different size pistons to even out pad wear. This is the smaller 30mm (leading) diameter piston used on 4 piston Nissin calipers. This piston will fit all 4 piston Nissin and ''Triumph'' calipers up to the latest radial style. Piston depth 22.5 mm. This is a genuine Nissin part. Made in Japan.

£15.00


 

 
Add to cart View cart
ID: B606 Brake caliper pins 64 mm
More information

64mm long pad pins used on the rear of many Triumph models. These are also used on the front of all Tridents and early Trophy/Sprint models with twin piston (reaction type) calipers. This style of caliper uses 2 pins  to retain the pads. These are sold as a pair. The pad pins are genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B607 Pad Pins. Front 4 Piston Type Caliper.
More information

Pad pins to fit all 4 piston ''Nissin'' and ''Triumph'' calipers. These are approximately 53 mm long.  x1 pin used per caliper to retain the pads, these do not project through the inside of the caliper and finish flush with the caliper body. 955 Daytona, 955 Speed Triple and 600/650 models used a longer pin with a split pin on the inside, the 53 mm long pins are fine as replacements. Sold as a pair. Genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B609 Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
More information

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600

£7.99


 

 
Add to cart View cart
ID: B810 Disc Bolt 10 mm shoulder 30 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,

£5.49


 

 
Add to cart View cart
ID: B811 Disc Bolt 1.5 mm shoulder 18 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 18 mm including 1.5 mm shoulder.

Fits front and rear on:

Adventurer, America, Bonneville, T100, Legend TT, Scrambler,  Speedmaster, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor and EFI), Tiger 955

Fits rear only on:

T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

 

 

£5.49


 

 
Add to cart View cart
ID: B909 EBC Organic Brake Pads Bonneville (rear), 900, 955, 1050
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£16.95


 

 
Add to cart View cart
ID: B910 Brake pad Nissin Bonneville (rear), 955, 1050
More information

Nissin NS semi metallic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£33.25


 

 
Add to cart View cart
ID: B914 Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£32.95


 

 
Add to cart View cart
ID: B915 Rear Brake Pads 675, TT600, Tiger 800, Street Triple
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£12.95


 

 
Add to cart View cart
ID: B918 Brake pad Armstrong sintered Daytona 955, Speed Triple 900, Tiger Explorer
More information

Armstrong sintered front brake pads.

Fits: 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT and can also be fitted to 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple,

Supplied as 2 pads for x 1 caliper

£11.95


 

 
Add to cart View cart
ID: B919 Brake pad Nissin Daytona, Speed Triple, Sprint
More information

Nissin NS semi metallic front pads fit all 4 piston Triumph/Nissin 4 piston axial (not radial) calipers. These were used by Triumph on as original equipment on all 3/4 cylinder carburettor models and will also fit later models with the same calipers..

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT, Supplied as 2 pads for x 1 caliper

£36.95


 

 
Add to cart View cart
ID: B921 Brake pad EBC Organic front Daytona, Trophy, Sprint, 900, 955, 1050
More information

EBC organic semi metallic front brake pads. Now with NRS hook retention system to prevent pad to backing delamination.

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT,

Supplied as 2 pads for x 1 caliper

£16.95


 

 
Add to cart View cart
ID: BA019 YB14LA2 gel sealed battery
More information

Sealed maintenance free LP/JMT gel battery. Upgrade/replaces YB14LA2

Fits: 750/900 Trident, 900/1200 Trophy, Legend, Thunderbird, Thunderbird Sport ,Adventurer, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive and Tiger 900

Also fits: T595/955 Daytona up to vin 71698, T509/955 Speed Triple up to vin 79696 

£53.95


 

 
Add to cart View cart
ID: BE070 Front Wheel Bearings 600/675/955
More information

x 2 Koyo front wheel bearings to fit

TT600, Speed Four, Daytona 600/650, Daytona 675, Street Triple, 955 Speed Triple from VIN 141872, 955 Daytona from VIN 132513,

£17.00


 

 
Add to cart View cart
ID: BE072 Front Wheel Bearings Trident, daytona, Trophy, 955 ST and RS
More information

x 2 Koyo bearings to fit

Front wheel on 750/900 Trident, 750/900/1000/1200 Daytona, Daytona T595, 955 Daytona (up to VIN 132512), 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, 750/900 Speed Triple, Speed Triple T509, 955 Speed Triple (up to VIN 141871), America (spoked wheel), America (cast wheel) 1050 Sprint ST, 1050 Sprint GT, 1050 Speed Triple (From VIN 210445 to VIN 461331, Tiger 1050 (From VIN 287504 to VIN 570058),

Rear wheel  on America (cast wheel)

 

 

£17.00


 

 
Add to cart View cart
ID: BE082 Sprocket Carrier Koyo Bearing and Seal Tiger 800, 955
More information

Japanese Koyo sprocket carrier (cush drive) bearing and seal to fit:

Tiger 800, Tiger 800 XC

Tiger 955 (cast wheel)

Bonneville, T100, America, Speedmaster, Thruxton, Scrambler

TT600, Speed Four, Daytona 600/650

955 Sprint RS (twin sided swinging arm)

955 Daytona (twin sided swinging arm)

675 Daytona, Street Triple

 

£9.95


 

 
Add to cart View cart
ID: BE600 Sprocket Carrier Bearing Single sided Swinging Arm Models
More information

Japanese twin ball 55X35X20 NTN bearing and dust seal to fit sprocket carrier (cush drive) on single sided swinging arm models. NTN has been used as the original equipment bearing.

Fits Daytona T595, Speed Triple T509, Daytona 955 (single sided), Sprint ST 955/1050, Sprint GT, Sprint RS 955 (single sided), Speed Triple 955/1050 and 1050 Tiger and Tiger Sport.

£31.95


 

 
Add to cart View cart
ID: BE601 Rear Wheel Bearings/Seals Single Sided Swinging Arm Models
More information

Rear wheel bearings (rear axle eccentric adjuster bearings), double ball bearing and needle roller with x 2 separate seals.

Fits T595, T509, 955 Speed Triple, 955 Daytona, 955 Sprint ST,single sided swinging arm Sprint RS, 1050 Sprint ST up to VIN 388246 and 1050 Speed Triple up to vin 346969.

£69.00


 

 
Add to cart View cart
ID: BE699 Valve Shims 25 mm 2.05 - 2.25
More information

Valve shim 25 mm diameter. Sizes from 2.05 to 2.25.

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955 up to VIN 132512, Legend, Rocket III, Classic, Roadster & Touring, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple up to VIN 141871, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955 up to VIN 139276, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, 750 & 900 Trident, Trophy 900 & 1200

Shim Thickness:
£7.95


 

 
Add to cart View cart
ID: BE700 Valve Shims 25 mm 2.30 - 3.20
More information

Valve shim 25 mm diameter. Sizes from 2.30 to 3.20

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955 up to VIN 132512, Legend, Rocket III, Classic, Roadster & Touring, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple up to VIN 141871, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955 up to VIN 139276, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, 750 & 900 Trident, Trophy 900 & 1200

 

Shim Thickness:
£3.95


 

 
Add to cart View cart
ID: BE702 Valve Shims 9.5 mm 1.70 - 2.95
More information

9.5 mm valve shim.

Fits: Daytona 955 from VIN 132513, 955 Speed Triple from VIN 141872, 1050 Speed Triple, 1050 Speed Triple R, 955 ST and RS from VIN 139277,  1050 Sprint ST, 1050 Sprint GT, Tiger 1050, Tiger Explorer and XC, Trophy 1215

Size ?:
£3.95


 

 
Add to cart View cart
ID: C347 Clutch lever 600/650/675/955 Daytona, Street Triple and 955 Speed Triple.
More information

Replacement lever for Daytona 600/650, 675 Daytona and Street Triple 675. Also fits Speed Four after vin 201642, 955 Daytona models from vin 186150. Late model single sided swinging arm 955 Sprint RS from vin 186151.

£11.50


 

 
Add to cart View cart
ID: C348 Clutch lever T595/955 Daytona, 955 ST/RS and 955 Speed Triple.
More information

Clutch lever fits all TT600, Speed Four as well as 955 Sprint RS/ST, T595/955 Daytona and 955 Speed Triple models up to VIN 186150.

£10.00


 

 
Add to cart View cart
ID: CC716 Speedo Cable T595 and 955 Daytona
More information

Speedo cable to fit: Daytona T595 and 955 Daytona up to VIN 132512

Inner cable length 78 cm

Take care not to over tighten the 5 mm screw holding the cable into the drive unit

£14.95


 

 
Add to cart View cart
ID: CC718 Speedo cable 86cm
More information

Speedo cable 86cm long.

Take care not to over tighten the 5 mm screw holding the cable into the drive unit

£14.95


 

 
Add to cart View cart
ID: CC731 Clutch Cable T595 and 955 Daytona
More information

Clutch cable to fit Daytona T595 and all 955 Daytona models up to VIN 132512. Inner cable length 112 cm. Outer length 103 cm.

£14.95


 

 
Add to cart View cart
ID: CC732 Throttle Cable Daytona T595, Speed Triple 955, Daytona 955
More information

Throttle cable Inner length approximately130 cm long. Also available + 11 cm for higher bar converstions.

Daytona T595

Daytona 955 up to VIN 132512

Speed Triple T509

Speed Triple 955 up to VIN 141871

Length ?:
£19.95


 

 
Add to cart View cart
ID: CC775 Twin throttle Cable 955 Daytona and 955 Speed Triple
More information

Twin throttles cables fitted to 955 Daytona fron VIN 132513 and 955 Speed Triple from VIN 141871

£19.95


 

 
Add to cart View cart
ID: CL499 Water Pump Joint Seal
More information

Replacement red joint seal for when water pump is disturbed. O-ring where pump enters the engine and copper sealing washer under joint screw are also included (on some models).

Fits T595, T509, 955 Daytona, T509 Speed Triple, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint GT, Tiger 900 (EFI), Tiger 955, 1050 Tiger, Tiger Sport

£3.95


 

 
Add to cart View cart
ID: CL932 Clutch plate set. 955 models (early engine)
More information

Clutch friction plate set (9 peices) to fit Daytona T595, T509, 955 Daytona up to VIN 132512, Speed Triple up to VIN141871, 900 Tiger (EFI), 955 Sprint ST and 955 Sprint RS up to VIN 139277.

£59.00


 

 
Add to cart View cart
ID: CL933 Clutch plate set. 955 models (later engine) and 1050
More information

Clutch friction plate set (10 peices) to fit Daytona 955 Daytona from VIN 132513, 955 Speed Triple from VIN141872, and 955 Sprint ST and 955 Sprint RS from VIN 139278. Also fits 1050 Speed Triple up to VIN 461331.

£69.00


 

 
Add to cart View cart
ID: CL935 Clutch Spring Set 955 and 1050
More information

EBC 15% uprated clutch spring set to fit all 955 and 1050 models.

£12.95


 

 
Add to cart View cart
ID: CS114 Cush Drive Rubbers Single Sided Swinging Arm Models
More information

Set of x 5 cush rubbers. Replaces Triumph T1224400

Fits: Daytona T595, 955 Daytona, 955 Speed Triple, 1050 Speed Triple, 955 Sprint RS (single sided swinging arm), 955 Sprint ST, 1050 Sprint ST, Sprint GT, 1050 Tiger Sport

£27.95


 

 
Add to cart View cart
ID: CS141 Gearbox sprockets 900/1200/955/1050 (530)
More information

Gearbox sprockets available in 17, 18 or 19 teeth for all carburettor 3/4 cylinder models, all 955 and all 1050 models. Smaller than standand gives improved acceleration at the expense of fuel consumption and on some models increased chain guide wear. Larger than standard engine sprockets lose out slightly on acceleration but have a more relaxed feel in top gear.  Please state size when ordering. (530 chain size).

Number of teeth ?:
£15.00


 

 
Add to cart View cart
ID: CS143 Rear sprockets (530)
More information

Rear sprockets in 40, 42, 43, 44, 45, 46, 47, 48 or 49 teeth to fit all carburettor 3 and 4 cylinder models as well as all wire wheel 955 Tiger models. Please state size when ordering. (530 chain size).

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS145 DID Chain and Sprocket Kit (530)
More information

530 VX gold heavy duty X-ring DID chain with sprockets, tab washer and sprocket cover gasket if required. Please state model when ordering and if in doubt just let us know what sprocket sizes you would like. (530 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  

Your bike ?:
£125.00


 

 
Add to cart View cart
ID: CS155 DID X-ring gold chain 530
More information

Original equipment DID VX  X-ring gold chain 530 size (5/8 x 3/8). Fits all 750, 900 (3/4 cylinder),1000, 955, 1200 and 1050 models.

DID X Ring Gold 530:
£89.00


 

 
Add to cart View cart
ID: CS176 Tab Washer Gearbox Sprocket 2, 3 and 4 cylinder carburettor models, 955, 1050.
More information

Gearbox sprocket tab (locking) washer to fit all of the Bonneville range (carburettor and EFI), 955, 1050 and 3/4 cylinder carburettor models. Replaces Triumph T1180181

 

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Super III, 900 Tiger, 750/900 Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, T595, 955 Daytona, T509, 955 Speed Triple, 955 Sprint ST, 955 Sprint RS, 955 Tiger, 1050 Tiger, Tiger Sport, 1050 Sprint ST, 1050 Sprint GT, 1050 Speed Triple, Bonneville 800/865, T100, Scrambler, America, Speedmaster, Thruxton and SE.

Tab Washer Gearbox Sprocket 3 and 4 cylinder carburettor models, 955, 1050.

£3.95


 

 
Add to cart View cart
ID: CS663 Rear Sprocket Single Sided Swinging Arm Models (530)
More information

Rear sprockets available in 42, 43, 44 or 45 teeth to fit all single sided swinging arm models. Please state size when ordering.  (530 chain size).

T595. T509, 955 Daytona, 955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS (single sided swinging arm)

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS664 Rear Sprocket 955 Twin Sided Swinging Arm Models (530)
More information

Rear sprockets in 40, 42, 43, 44, 45 or 46  teeth to fit 955 Tiger (not 955 Tiger with wire wheels-see ID143) and 1050 Tiger twin sided swinging arm models. Please state size when ordering. (530 chain size).

955 Daytona (twin sided swinging arm), 955 Sprint RS, 955 Tiger (cast alloy wheel model 2005/2006), 1050 Tiger

Number of teeth ?:
£25.00


 

 
Add to cart View cart
ID: CS950 Chain Rivet Tool
More information

Replica DID chain rivet tool. This will push the rivet link together and neatly rivet the ends over. To separate an old chain or shorten a chain, grind the rivet ends one side of the link to be removed until the side plate is hit. Go slightly below the surface to be sure the rivetting is well ground away, then knock apart with a punch and hammer.

£39.95


 

 
Add to cart View cart
ID: D014 320mm front disc 5 hole fitting for Daytona 955 (pair)
More information

x 2 front discs 320 mm with 6mm offset.

To fit: Daytona 955 from vin 132513,  Speed Triple 955 from vin 141872

Please check the off set before ordering (inside face against the wheel to the inside face of the disc rotor).

Made in UK.

£235.00


 

 
Add to cart View cart
ID: D016 Rear Disc 220 mm T595, T509, 955 Daytona, 955 Speed Triple
More information

220 mm rear disc to fit TT600, Speed Four, Daytona 600, Daytona 650, T595, T509, 955 Daytona, 955 Speed Triple, 1050 speed Triple, 675 Daytona and Street Triple.

£69.00


 

 
Add to cart View cart
ID: EG399 Regulator 955
More information

Regulator fits inside alternator on all 955 models with alternator behind engine. Daytona T595, Daytona 955 up to vin 132512, 955 Sprint ST and RS up to vin 139275. Also fits Trophy 1200 made after vin 55346 and injected Tiger 900.

£39.95


 

 
Add to cart View cart
ID: EG400 Regulator unit to fit separate Denso generator. Trident, Trophy, Thunderbird 900
More information

Replacement regulator to fit Denso generator used on all Trident, Trophy, 750/900/1000/1200  Daytona, 750/900 Speed Triple, Tiger 900, Sprint 900, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint ST 955 (up to vin 139276), Sprint Sport, Sprint RS (up to vin 139276), T509 Speed Triple, 955 Speed Triple (up to vin 141871), T595 and 955 Daytona (up to vin 132512)

Made in Argentina

£68.00


 

 
Add to cart View cart
ID: EG499 1050 Speed Triple, Tiger, Sprint 1050 ST, Daytona 955
More information

114mm diameter replacement generator stator kit for 955 Daytona from VIN 132513, 1050 Speed Triple, 1050 Tiger and 1050 Sprint ST.

PLEASE MEASURE GENERATOR DIAMETER BEFORE ORDERING AS VIN NUMBERS ARE JUST A GUIDE

 

 

£114.95


 

 
Add to cart View cart
ID: EG684 Regulator Rectifier Electrex unit 600/650/955 /1050
More information

Hi-power series regulator rectifier with MOSFET technolgy. UK based company Electrex have taken a fresh look at this problem part. This is the very latest Electrex unit with direct connection to the battery terminals bypassing problems associated by going through the wiring loom. Supply from the alternator is now via a new heavy duty connector. Supplied with instructions. New connectors have to be crimped onto the wiring coming from the alternator which are supplied. This takes a few minutes but is well worth the effort.

  • Super effiecient 'MOSFET' regulator rectifier.
  • Direct fused connection to the battery to avoid common connection faults in the wiring loom.
  • Works where airlow is limited.
  • In-built thermal protection.
  • Manufactured in the UK.

 

This Electrectex unit fits Daytona 955 from vin 132512, 955 Speed Triple from vin 141872, 955 Sprint ST and Sprint RS from vin 139277, Speed Four, Daytona 600, Daytona 650, 1050 Speed Triple, 1050 Tiger and all Tiger 955.

 

£114.00


 

 
Add to cart View cart
ID: EL107 Xenon headlight bulb H4
More information

Xenon 60/55 w 472 H4 type headlight bulb, 30% brighter than standard. Fits all carburettor models and all 955 models.

£7.50


 

 
Add to cart View cart
ID: EL177 Replacement indicator lens (Each)
More information

£4.95


 

 
Add to cart View cart
ID: EL403 Indicator left. Daytona T595, 955, T509 Speed Triple
More information

Left side front indicator complete (also right side rear) with correct wiring which connects into original Triumph wiring loom.

T509, Daytona T595, 955 Daytona, 955 Speed Triple.

£14.95


 

 
Add to cart View cart
ID: EL404 Indicator right. Daytona T595, 955, T509 Speed Triple
More information

Right side front indicator complete (also left side rear) with correct wiring which connects into original Triumph loom.

T509, Daytona T595, 955 Daytona, 955 Speed Triple.

£14.95


 

 
Add to cart View cart
ID: EX083 Exhaust studs steel, all 3 cylinder models
More information

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.

£9.95


 

 
Add to cart View cart
ID: EX085 Exhaust header stainless steel studs (priced each)
More information

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS

£3.95


 

 
Add to cart View cart
ID: EX336 Exhaust connector 955 Speed Triple.
More information

Fits clamp type fitting downpipes on 2002> 955 Speed Triple models to allow 2" (51mm) aftermarket silencer to be fitted. Original exhaust downpipe outlet should be 44/45mm.

£49.00


 

 
Add to cart View cart
ID: F089 Gear change lever rubber
More information

These are very high quality gear change rubbers, which will outlast the original part. 41 mm long.

To Fit:

Sprint 900, Sprint Sport, Sprint Executive and Trident Sprint.

Speed Triple 750/900

Trophy 900/1200

Trident 750/900

Daytona 750, 900, 1000, 1200

Tiger 900 carburettor and injection (EFI)

Tiger 955

TT600 and Speed Four

Sprint 955 RS and 955 ST (up to VIN 139276)

Daytona T595 and 955 from VIN 87317 (one piece 'reverse' gear lever)

Speed Triple 955 from VIN 87317 (one piece 'reverse' gear lever)

£1.75


 

 
Add to cart View cart
ID: F162 Riders Foot Rest with rubbers for extra grip available for T.595/955 Daytona
More information

Footrest with rubber and hero blob fit T595, T509, all 955 Daytona and 955 Speed Triple all models. Sold as a pair.

£34.95


 

 
Add to cart View cart
ID: F621 Lever Bush T595/T509/955 (16mm)
More information

Brake pedal and gear change pivot bushes to fit Speed Triple T509, Daytona T595, 955 Speed Triple up to vin 141872 and Daytona 955 up to vin 132513.

£4.25


 

 
Add to cart View cart
ID: F630 Cover/Boot Gear Change Ball Joint
More information

Gear change ball joint end pivot boot/cover. All models.

£2.95


 

 
Add to cart View cart
ID: H090 Bar end weights to fit Daytona T595/955, 955 Speed Triple and Thruxton, black steel (priced per pair)
More information

Gloss black coated steel bar end weighs (150 gram each) to replace original black aluminium alloy bar end weights. These are much heavier to change the natural vibration/frequency.  Sold as a pair. Will fit handlebars with tubular (not solid) section at the end to a depth of 52 mm with18 mm inside diameter required. Bar end weight is 25 mm outside diameter. 

Fits T509, T595, 955 Daytona up to vin 132513, 955 Speed Triple and Thruxton.

£12.95


 

 
Add to cart View cart
ID: H159 Handlebar pivot pin T595 and early 955 Daytona.
More information

Stainless steel pivot pin 6.5 mm diameter used on the first series handlebars on T595 and 955i Daytona models. Please check pin size as these were supplied in 5 mm or 6.5 mm. We no longer have the 5 mm pins.

£9.95


 

 
Add to cart View cart
ID: H160 Handlebar R/h T595/955 Daytona
More information

Replacement bar  for all T595 and 955 Daytona up to approximately 1999 with multipiece clip-on design.

£19.00


 

 
Add to cart View cart
ID: J017 Fuel Filler cap 600, 650, 675, 800, 955, 1050
More information

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509

£49.95


 

 
Add to cart View cart
ID: J183 Fuel Connector O-Rings
More information

Fuel connector  O-rings x 2 used on fuel injected models. These  O-rings are manufactured from Viton.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems. When removing a fuel connector, make sure the clip is released and while separating keeping square at all times until fully apart.

Fits T595, T509, 955 Daytona, 955 Speed Triple, TT600, Speed Four, Sprint 995 ST, Sprint 995 RS, Tiger 900 (injected) and Tiger 955.

£1.90


 

 
Add to cart View cart
ID: J184 Fuel Filter Injected Models EFI
More information

Mahle KL145 fuel filter to fit:

Bonneville America EFI, Speedmaster EFI, Bonneville EFI, Scrambler EFI, Thruxton EFI, Rocket 3, Rocket 3 Classic, Rocket 3 Touring, Tiger 900 (injection), Tiger 955i, Sprint ST 955, Sprint RS 955, Speed Triple 955, TT600, Daytona 600, Daytona 650 and Speed Four 600

£12.95


 

 
Add to cart View cart
ID: J185 Oil Filter OE Fits all Injected Models
More information

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600

£9.95


 

 
Add to cart View cart
ID: J187 Oil filter wrench 955/1050/Bonneville range
More information

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 

£12.95


 

 
Add to cart View cart
ID: J189 Sump plug washer 14 mm
More information

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.

£1.45


 

 
Add to cart View cart
ID: J190 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.

£5.95


 

 
Add to cart View cart
ID: J191 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.

Contact Us For Details


 

 
View cart
ID: J958 Air Filter Pipercross T595, T509, 955 Sprint ST and RS
More information

Pipercross performance filter to fit Daytona T595, Speed Triple T509, 955 Daytona up to VIN 132512, 955 Speed Triple up to VIN 141871, 955 Sprint RS/ST up to vin 139277, Tiger 900 EFI and Tiger 955.

£34.95


 

 
Add to cart View cart
ID: J960 Air filter Pipercross for 955 Daytona, Speed Triple and Sprint ST/RS
More information

Pipercross performance air filter to fit 955 Daytona (from vin 132513), 955 Sprint ST (from vin 139277) and 955 Sprint RS (from vin 139277)

£36.95


 

 
Add to cart View cart
ID: K810 Left Side Crank Cover Gasket all 955 up to 2001
More information

Left side crank cover gasket fits the first generation 955 engine (generator behind the engine block type) and also the 900 fuel injected Tiger. This cover holds the breather seal which often needs changing when the engine has sudden high oil consumption.

£3.95


 

 
Add to cart View cart
ID: K856 Rotary Breather Seal and Gasket 955 Sprint ST and RS (early style engine)
More information

Rotary Breather Seal and Gasket to fit 955 Sprint ST and Sprint RS up to VIN 139276, Daytona 955 up to VIN 132512, 955 Speed Triple up to VIN 141871, Tiger 900i (EFI), Daytona T595 and T509.

£17.95


 

 
Add to cart View cart
ID: K857 Generator Cover Gasket all 1050 and later 955 engines. Replaces Triumph T1261098
More information

Left side front engine cover gasket. Fits all 1050 engines, 955 Tiger, Daytona 955 from VIN 132513, 955 Speed Triple from VIN141872, 955 Sprint ST from VIN 139277 and 955 Sprint RS from VIN 139277

Replaces Triumph T1261098

£4.95


 

 
Add to cart View cart
ID: K858 Rotary Breather Seal and Gasket to fit 955 (later style engines)
More information

Rotary breather seal and paper gasket to fit later style 955 engines generator engine cover - left side front engine cover. Oil in the airbox, smoke from the exhaust and excessive oil consumption are signs that this seal needs changing. Fits 955 Tiger, Daytona 955 from VIN 132513, 955 Speed Triple from VIN141872, 955 Sprint ST from VIN 139277 and 955 Sprint RS from VIN 139277

£18.95


 

 
Add to cart View cart
ID: K891 Gasket Set 955 early style engine
More information

Lower engine cover gasket set to fit Tiger 900 (EFI), Daytona T595, 955 Daytona up to VIN 132512, T509, 955 Speed Triple up to VIN 141871, 955 Sprint ST and RS up to VIN 139276

£14.95


 

 
Add to cart View cart
ID: K892 Gasket and seal set 955 early style engine
More information

Lower engine cover gasket and seal set to fit Daytona T595, 955 Daytona up to VIN 132512, 955 Speed Triple up to VIN 141871, 955 Sprint ST and RS up to VIN 139276

£49.95


 

 
Add to cart View cart
ID: K901 Gasket Set 955 and 1050
More information

Lower engine cover paper gasket set to fit later style 955 and all 1050 engines. Fits 955 Tiger, Daytona 955 from VIN 132513, 955 Speed Triple from VIN141872, 955 Sprint ST from VIN 139277, 955 Sprint RS from VIN 139277, 1050 Sprint ST, 1050 Sprint GT, 1050 Speed Triple, Speed Triple R, Speed Triple S, 

The right side small starter clutch cover changed from from VIN 491324 all 1050 models. This gasket is also included in every set.

 

 

£18.95


 

 
Add to cart View cart
ID: K920 Cam Cover Seal Set 955 and 1050 models.
More information

Cam cover seal set to fit all 1050 and later 955 engines. Large outer seal, cam cover screw seals x 6 and spark plug tunnel seals x 3.

Fits: 955 ST and 955RS from VIN 139277,  Daytona 955 from VIN132513, Speed Triple 955 from VIN141872, 1050 Speed Triple, 1050 Speed Triple S, 1050 Speed Triple R, Speed Triple S, 1050 Tiger, Tiger Sport, 1050 Sprint ST and 1050 Sprint GT.

 

 

 

£24.95


 

 
Add to cart View cart
ID: K926 Cam Cover Seal Set 955, T595, T509, 955 Daytona, Tiger 900 Injection
More information

Cam cover seal set with x 8 cam cover screw seals to fit T509, Daytona T595, 955 Daytona (up to VIN 132512), Speed Triple 955 (up to VIN 1414871), Sprint ST 955 (up to VIN 139276), Sprint RS (up to VIN 139276), Tiger 900 (injection) and 955 Tiger.

£24.95


 

 
Add to cart View cart
ID: S063 Replacement chromed fork tubes to fit most models
More information

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.

Model ?:
£99.00


 

 
Add to cart View cart
ID: S306 Steering head bearing set.
More information

Taper roller lower and ballrace upper bearing. To fit all 900/955 aluminium alloy framed models. Speed Triple, Daytona and Sprint RS/ST.

£27.00


 

 
Add to cart View cart
ID: S503 Replacement fork seals (priced per pair)
More information

45 mm fork seals to fit Showa forks. These were first used on the T595 Daytona and T509 Speed Triple. Also fit 955 Daytona and 955 Speed Triple. Now with double spring sealing.

£10.95


 

 
Add to cart View cart
ID: S516 Fork Dust Seals, 45mm Showa forks.
More information

Dust seal to fit 45mm Daytona T595, Daytona 955, Speed Triple T509 and 955. Sold in pairs.

£12.95


 

 
Add to cart View cart
ID: S619 Fork Bush Set, 45mm Showa.
More information

Ptfe coated fork bush set to fit T595, T509, 955 Daytona and Speed Triple. Very similar to some Honda Fireblade forks, these use a 45mm tube and are supplied to Triumph by the Japanese Showa company. Apart from the way the front mudguard is retained (presumably to avoid fixing lugs and make the external machining easier), these are a good quality product.

£29.00


 

 
Add to cart View cart
ID: SD550 Drag link Bearings, Seals and hardened sleeve kit T595, 955 Daytona, 955 Speed Triple
More information

Drag link bearings, seals and the hardened sleeve for all single sided swinging arm models T595, 955 Daytona, T509, 955 Speed Triple, and 1050 Speed Triple up to VIN 461331. The drop link is a plated steel component.

£40.00


 

 
Add to cart View cart
ID: SD554 Drop Link Bearings, Seals and Hardened Sleeve kit to fit T595, 955 Daytona, 955 Speed triple
More information

Drop link bearings, seals and all hardened sleeves for T595, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple up to VIN 461331. The drop link is the aluminium alloy part of the linkage.

£119.00


 

 
Add to cart View cart
ID: SD558 Drag Link bearings, Seals and Sleeve Kit For 955 Daytona Twin Sided Swinging Arm
More information

Drag link bearings, seals and hardened sleeves to fit the twin sided swinging arm 955 Daytona. There are no drop link bearings/seals used on this model.

 

 

£105.00


 

 
Add to cart View cart
ID: SD580 Swinging Arm Pivot Bearing Set 955 & 1050
More information

Swinging arm bearing and seal kit to fit all single sided swinging arm Daytona, Speed Triple and Sprint ST/RS models.

Fits: Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple T509, 955 Speed Triple, 1050 Speed Triple & R, 955 Sprint RS, 955 Sprint ST, 1050 Sprint ST and 1050 Tiger Sport.

£29.95


 

 
Add to cart View cart
ID: TA737 Gear Change Shaft Oil Seal
More information

Outer oil seal on the gear change shaft on vitually all Triumph models. The existing seal can be very carefully hooked out and a new seal fitted. On models with a removable cover it's better to remove the cover to do the job. When fitting the seal back onto the splined gear shaft, it's good to cover the spline with tape to protect the seal inner.

Fits: TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, T509, 955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, Tiger 900/955/1050, Thunderbird 900, Thunderbird Sport, Adventurer, Legend TT.  Fits all the Bonneville range up to VIN 372312, Bonneville, T100, Thruxton, Scrambler, Speedmaster and America.

£4.30


 

 
Add to cart View cart
ID: TA740 Gearbox Output Shaft Seal. Replaces Triumph T3600112
More information

Gearbox output shaft HTC directional oil seal (anticlockwise for all these models - not suitable for the Bonneville engines as they use a clockwise directional seal) fits T509, T595, 955 Daytona, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint GT, 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor and injection), 955 Tiger, 1050 Tiger, Thunderbird, Thunderbird Sport, Adventuer, Legend, Trident Sport, Sprint 900, Sprint Sport and Sprint Executive.

Replaces Triumph T3600112     

 

£4.95


 

 
Add to cart View cart
ID: TA745 Oil Seal Valve Stem. Replaces Triumph 3600004-T0301
More information

Brown valve stem seal sold individually. 5.5 mm valve stem size. Fits Bonneville, SE, T100, Speedmaster, America, Scrambler, Thruxton, Rocket 3, Classic, Roadster, Touring, Adventurer, Thunderbird, Thunderbird Sport, Legend, 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, T595, 955 Daytona (up to VIN 132512), T509, 955 Speed Triple (up to VIN 141871) , 955 Sprint ST and RS (up to VIN 139276), Thunderbird 1600/1700, Thunderbird Storm, LT, Tiger 900 (carb and EFI), 955 Tiger

Replaces Triumph 3600004-T0301

 

 

 

 

£3.95


 

 
Add to cart View cart
ID: TA746 Valve Stem Seal 5 mm (Green)
More information

Green valve stem seals sold individually. 5 mm valve stem size.

Fits 955 Sprint ST and RS from VIN 139277, Daytona 955 from VIN 132513, 955 Speed Triple from VIN 141872, 1050 Sprint ST and GT, 1050 Tiger, Tiger Sport, 1050 Speed Triple, 1050 Speed Triple R, Tiger Explorer and XC, Trophy 1215 and SE.

£2.95


 

 
Add to cart View cart
ID: TA860 Rotary Breather Seal
More information

Rotary breather seal located under the left side engine cover. Oil in the airbox, smoke from the exhaust and excessive oil consumption are signs that this seal needs changing. Fits carburettor Bonneville, T100, Thruxton, America, Speedmaster, Daytona 1000, Daytona 1200, Adventurer, Thunderbird, Thunderbird Sport and Legend. Also to fits Tiger 900 (EFI), Daytona T595, 955 Daytona up to VIN 132512, T509, 955 Speed Triple up to VIN 141871, 955 Sprint ST and RS up to VIN 139276.  Labyrinth type seal, size 14.5 x 28.4 x 6.5. This replaces Triumph T3600059

£14.95


 

 
Add to cart View cart
ID: TA861 Rotary Breather Seal
More information

Rotary breather seal to fit later style 955 engines, located under the left side front engine cover. Oil in the airbox, smoke from the exhaust and excessive oil consumption are signs that this seal needs changing. Fits 955 Tiger, Daytona 955 from VIN 132513, 955 Speed Triple from VIN141872, 955 Sprint ST from VIN 139277 and 955 Sprint RS from VIN 139277. Labyrinth type seal, size 18.4 x 32.5 x 7.0. This replaces Triumph T3600089

£14.95


 

 
Add to cart View cart
ID: TA864 Seal for cam cover screw (Black) twin lip
More information

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.

£1.99


 

 
Add to cart View cart
ID: Z059 Rear Axle Cover Set All Single Sided Swinging Arm Models.
More information

Spindle End Cover Kit for single sided swinging arm Triumphs (2 Covers).  These precision CNC machined aluminium covers are manufactured in the UK and black anodized finished.  The kit completely covers the spindle nuts and any clips so that the rear end is completely tidied up.  Right side is 87 mm diameter and left side 66 mm. Easily fitted / removed in minutes.

Fits:  

Daytona T595 & Daytona 955 (Single Sided Swinging Arm)

Speed Triple T509

Speed Triple 955

Speed Triple 1050

Speed Triple 1050R

Sprint RS 955 (Single Sided Swinging Arm)

Sprint ST 955

Sprint ST 1050

Sprint GT

 

 

 

£39.95


 

 
Add to cart View cart
ID: Z134 Stick Ignition Coil later 955 and all 1050 models
More information

Replacement for the Denso ignition coil to fit all 955 Daytona from vin 132513, 955 Speed Triple from vin 141872, Sprint RS/ST 955 from vin139277, all 1050 Sprint ST, 1050 Speed Triple and 1050 Tiger.

£59.95


 

 
Add to cart View cart
ID: Z272 NGK DPR8EA-9 spark plug
More information

Original equipment NGK DPR8EA-9 spark plug for 900/955 Tiger, Bonneville 800/865, Scrambler, America, Speedmaster, Thruxton, 750/900/1000/1200 Daytona, 750/900 Trident,  750/900 Speed Triple, Thunderbird 900, Legend TT, Adventurer, Thunderbird Sport,  900/1200 Trophy,  955 Sprint RS/ST up to vin 139276, T509 Speed Triple, 955 Speed Triple up to vin 141871, T595 Daytona, 955 Daytona up to vin 132512

£3.50


 

 
Add to cart View cart
ID: Z276 NGK CR8EK and CR9EK spark plug
More information

Original equipment NGK CR8EK and CR9EK twin electrode spark plug to fit TT600, Speed Four, 600/650675 Daytona,  675 Street Triple, 675 Street Triple R, Tiger 800, Tiger 1050, Speed Triple 1050, 955 Speed Triple from vin 141872, Daytona 955 from vin 132513, Sprint RS/ST from vin139277

Plug type ?:
£8.99


 

 
Add to cart View cart
ID: Z293 NGK DPR9EA-9 Spark Plug
More information

Cooler running than the recommended standard 8 grade NGK spark plug. Better when the ambient temperature is very high or the engine has been modified with higher compression pistons. Engine may be slightly more difficult to start but run cooler.

£3.50


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart
ID: Z420 Alternator Cush Rubbers
More information

Alternator cush drive rubbers. Supplied as a set of 4.

Fit Daytona 750/900/1000/1200, Daytona T595, Daytona 955 up to vin 132512, Speed Triple 750/900, Speed Triple T509, 955 Speed Triple up to vin 141871, Sprint 900, Trident Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST and RS up to vin139276, Trident 750/900, Trophy 900/1200, Tiger 900 (carb), Tiger 900 (injected), Legend, Thunderbird 900, Thunderbird Sport, Adventurer

£11.95


 

 
Add to cart View cart
ID: Z420 Alternator Cush Rubbers
More information

Alternator cush drive rubbers. Supplied as a set of 4.

Fit Daytona 750/900/1000/1200, Daytona T595, Daytona 955 up to vin 132512, Speed Triple 750/900, Speed Triple T509, 955 Speed Triple up to vin 141871, Sprint 900, Trident Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST and RS up to vin139276, Trident 750/900, Trophy 900/1200, Tiger 900 (carb), Tiger 900 (injected), Legend, Thunderbird 900, Thunderbird Sport, Adventurer

£11.95


 

 
Add to cart View cart
ID: Z421 Indicator/Flasher Relay 3 pin (Original and LED Indicators)
More information

Quality European manufactured replacement 3 pin/connector indicator relay to fit all models. Like the original units, it also has a hazard function for models with a switch fitted.

This unit is also excellent with most LED indicators. Unlike the original incandescent bulbs, LED lamps are polarity sensitive.

Fits:Adventurer, Thunderbird 900, Thunderbird Sport, Legend, TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Trophy 900/1200, Sprint 900, Sprint Sport, Sprint Executive, T509, T595, 955 Speed Triple, 1050 Speed Triple (up to VIN 735336), 955 Daytona, Tiger 900 Carb and EFI, Tiger 955, Rocket III, Classic, Roadster, Sprint ST 955 and  Sprint RS. 

Fits all the Bonneville range carburettor models, Thruxton, T100, America, Speedmaster and Scrambler. Also fits EFI Bonneville range up to VIN 521668.

£11.95


 

 
Add to cart View cart
ID: Z422 Hella flasher relay
More information

Genuine Hella replacement indicator relay for original 10w bulbs. (A few export markets and the Thunderbird 900 range use 21w).

Fits:TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Trophy 900/1200, Sprint 900, Sprint Sport, Sprint Executive, T509, T595, 955 Speed Triple, 1050 Speed Triple, 955 Daytona, Tiger 900 Carb and EFI, Tiger 955, Rocket III, Classic, Roadster, Sprint ST 955 and  Sprint RS. 

Fits all the Bonneville range carburettor models, Thruxton, T100, America, Speedmaster and Scrambler. Also fits EFI Bonneville range up to VIN 521668.

Made in Germany.

£19.95


 

 
Add to cart View cart
ID: Z428 Twin high/low beam relay kit
More information

For twin headlight bikes supplied with only one high and one low beam working, this relay kit will reinstate  both high and low beam to work as pairs on Sprint 955 ST, Sprint 955 RS, Tiger 955, Daytona 955, Speed Triple 955.  The 2 relays supplied are each 40A rated.

£12.00


 

 
Add to cart View cart
ID: Z431 Starter Solenoid
More information

Fits: 750/900 Trident, 750/900/1000/1200 Daytona, T595, 955 Daytona, T509, 955 Speed Triple, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST, 955 Sprint RS, Tiger 900, Tiger 955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, TT600, Speed Four, Daytona 600, Daytona 650, Bonneville 800/865, T100, Thruxton, Scrambler, America, Speedmaster,

£19.95


 

 
Add to cart View cart
ID: Z585 Cam chain tensioner spring
More information

Replacement cam chain tensioner spring. It is recommended that the spring is replaced if its length has reduced significantly below 73.7mm. This is a much more cost effective option than replacing the complete tensioner assembly. To change the spring, acces by removing the large central bolt. The tensioner does not have to be removed. Removing just the central bolt still allows the ratchet mechanism to retain the existing tension on the cam chain.

Fits: Adventurer, America, Bonneville, T100 & SE, Daytona 750, 900, 1000, 1200, Daytona T595, Daytona 955, Rocket III, Classic, Roadster & Touring, Legend, Scrambler, Speedmaster, 750 & 900 Speed Triple, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Sprint RS & ST 955, 1050 Sprint ST, Thruxton, Thunderbird 900, Thunderbird Sport,Tiger 900 (carburettor), Tiger 900 (injection), Tiger 955i, Tiger 1050, 750 & 900 Trident, Trophy 900 & 1200.

 

£12.95


 

 
Add to cart View cart
ID: Z595 Starter Motor Denso
More information

Denso starter motor ready to fit:

Adventurer, 750/900/1000/1200 Daytona, Daytona T595, 955 Daytona (up to VIN 132512), Legend TT, Speed Triple T509, 955 Speed Triple (up to VIN 141871), 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST (up to VIN 139276), 955 Sprint RS (up to VIN 139276), Tiger 900, Tiger EFI, Thunderbird 900, Thunderbird Sport and 750/900 Trident.

 

£169.00


 

 
Add to cart View cart
ID: Z596 Denso starter motor brushes
More information

1 pair of brushes fitted into holder/back plate to fit  all Denso starter motors.

Triumph have used Denso starter motors with Taigene starter motors being used normally on a few Thunderbird 900, Legend and Thunderbird Sport. A label showing the manufacturer with the Triumph part number was originally fitted.

Fits: Adventurer, 750/900/1000/1200 Daytona, Daytona T595, 955 Daytona (up to VIN 132512), Legend TT, Speed Triple T509, 955 Speed Triple (up to VIN 141871), 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955 Sprint ST (up to VIN 139276), 955 Sprint RS (up to VIN 139276), Tiger 900, Tiger EFI, Thunderbird 900, Thunderbird Sport and 750/900 Trident.

£24.95


 

 
Add to cart View cart
ID: Z598 Rebuild kit Denso starter motor
More information

Complete kit to rebuild a Denso starter motor.

Fits:Adventurer, Daytona 750,900,1000,1200, Daytona T595, Daytona 955 up to VIN 132513, LegendTT, Speed Triple 750,900, Speed Triple T509, Speed Triple 955 up to VIN 141872, Sprint 955 RS, Sprint 955 ST, Thunderbird 900, Thunderbird Sport, Tiger 900 carburettor and EFI, Trident 750,900 and Trophy 900,1200.

£53.95


 

 
Add to cart View cart
ID: Z650 Starter motor brush and back plate set. Denso.
More information

Starter motor brush and back plate set. Denso.

TT600 and Speed Four up to VIN 171120

Daytona 955 from VIN 132513

Speed Triple 955 from VIN 141872

Sprint 955 ST and RS from VIN139277

Tiger 955

Sprint 1050 ST and GT

 

 

£24.95


 

 
Add to cart View cart
ID: Z652 Starter Motor Rebuild Kit TT600, 955 and 1050
More information

Starter motor rebuild kit

TT600 and Speed Four up to VIN 171120

Daytona 955 from VIN 132513

Speed Triple 955 from VIN 141872

Sprint 955 ST and RS from VIN139277

Tiger 955

Sprint 1050 ST and GT

 

Contact Us For Details


 

 
View cart
ID: Z701 Cam Cover Seal Set of 8 (3 Cylinder Carburettor Engines)
More information

8 cam cover screw seals to fit all 3 cylinder carburettor models. These bonded seals were known originally as Dowty seals.

TA864 x 8

£14.95


 

 
Add to cart View cart
ID: Z740 Dust Seals Front Wheel
More information

First line of defence for your wheel bearings, outer 'dust' seals are actually oil seals. This pair of front wheel seals are used on all carburettor 3/4 cylinder  models as well as 955 Sprint ST/RS and 955 Daytona/Speed Triple with 6 hole fixing front discs. Supplied as a pair.

£7.80


 

 
Add to cart View cart
ID: Z744 Dust Seals Front Wheel
More information

Front Wheel dust seals to fit Daytona 955 from vin 1325513 and 955 Speed Triple from vin141872

£7.90


 

 
Add to cart View cart
ID: Z850 Stainless Washers 900 Speed Triple, T595, T509
More information

Stainless steel solid countersunk washer to accept 5 mm screw used on Speed Triple 900 two instrument mounting points and front fuel tank cover on Daytona T595, 955 Daytona, T509 and 955 Speed Triple.

£2.95


 

 
Add to cart View cart





 
eXTReMe Tracker