• View Basket
  • Checkout
  • Home Page


Triumph (all parts stocked) > Triumph Fuel, Oil Filters, Air Filters
 

Triumph (all parts stocked)

Quick Jump
Sort this list by
ID: G005 Mikuni Inlet Rubber (Cylinder Head to Carburettor)
More information

Triumph have used Mikuni and Keihin carburettors. This part fits models with Mikuni carburettors and is an unrestriced inlet rubber.

As original fitment on 750/900/1000/1200 Daytona, Daytona Super III, 750/900 Speed Triple, Trident Sprint, Sprint 900, Sprint Executive, Sprint Sport, 750/900 Trident, 900/1200 Trophy, 900 Tiger (carburettor) and Thunderbird Sport.

The 900 Thunderbird range originally had restricted inlet rubbers to give more bottom end performance at the expence of mid range and top end. The unrestricted rubber listed here can also be fitted to the following models instead of the restriced inlet rubber: Adventurer, Legend, and Thunderbird.

NEW STOCK IN NOVEMBER

 

 

Contact Us For Details


 

 
View cart
ID: G010 Mikuni (Air Box to Carburettor) Rubber
More information

Triumph have used Mikuni and Keihin carburettors. This fits all Mikuni carburettor models from air box to carburettor.

Fits:  Adventurer, 750/900/1000/1200 Daytona, Daytona Super III, Legend, 750/900 Speed Triple, Thunderbird 900, Thunderbird Sport, Trident Sprint, Sprint 900, Sprint Executive, Sprint Sport, 750/900 Trident, 900/1200 Trophy and 900 Tiger (carburettor).

Replaces Triumph 2200013-T0301. 

 

£7.95


 

 
Add to cart View cart
ID: G015 Inlet Rubber Keihin (Cylinder Head to Carburettor)
More information

Inlet rubber for all models with Keihin carburettors fitted.

Where Keihin carburettors are used these fit: Adventurer, America, Bonneville 800/865, T100, Legend TT, Scrambler, Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Thruxton, Thunderbird 900, Thunderbird Sport, Trophy 900

£6.95


 

 
Add to cart View cart
ID: G020 Keihin (Air Box to Carburettor) Rubber
More information

Carburettor to airbox rubbers for all 3 cylinder models with Keihin carburettors fitted.

Where Keihin carburettors are used these fit: Legend TT, Sprint 900, Sprint Sport, Sprint Executive,  Thunderbird 900, Thunderbird Sport and Trophy 900

£5.95


 

 
Add to cart View cart
ID: J002 Dip stick Trident, Sprint 900, Tiger 900, Trophy
More information

Black anodized billet aluminium alloy dip stick with stainless steel level rod. Throw away that badly moulded cross threading plastic dip stick and replace it with this lovely piece of workmanship - almost too good to use.

Fits, Trident 750/900, Sprint 900, Trident Sprint, Sprint Sport, Sprint Executive, Tiger 900 (carburettor), Daytona 750/900/1000/1200, Speed Triple 750/900, Trophy 900 and Trophy 1200 grey engine.

A few very early models had very fine threaded dip sticks (only up to vin 3926) which we only stock in plastic.

 

£25.00


 

 
Add to cart View cart
ID: J003 Fuel pipe set
More information

Genuine Triumph fuel pipes and pattern vacuum pipe with x 4 clips to fit all models with vacuum operated fuel tap and Mikuni carburettors (Not Tiger 900 and Thunderbird 900 range). 

750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport, Sprint Executive, and 750/900 Speed Triple.

 

 

£47.95


 

 
Add to cart View cart
ID: J005 Fuel Filler Cap Seal
More information

Water in the fuel tank ?  Make sure the water drain hole (from under filler cap to rubber pipe on rear of fuel tank) is clear.  The fuel filler cap seal is supplied bonded to a plated steel dished plate and is a direct swap for the original part. When the filler cap is closed this seals against the fuel tank filler neck and is supplied with no springs, original parts are required to be reused. The third and forth pictures on this listing are of a complete filler cap just to show where the seal fits. This listing is not for a complete filler cap !

Fuel filler cap metal bonded seal fits 750/900 Trident. 750/900 Speed Triple, 900/1200 Trophy, Tiger 900 (carb), Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Super III and 750/900/1000/1200 Daytona.

£12.95


 

 
Add to cart View cart
ID: J013 Locking filler cap Bonneville, Thunderbird
More information

Chrome locking filler cap with 2 keys to fit Bonneville 800/865, T100, Thruxton, Scrambler, Street Scrambler, Street Cup, Street Twin, Thunderbird 900, Legend, Thunderbird Sport, Adventurer, Rocket III, Touring, 1600/1700 Thunderbird, Thunderbird Storm, LT and Commander.  We now supply a choice of x 2 sealing rings with each cap. The thinner of the seals allows the filler cap to fit very close to the surface of the tank. The thicker seal gives a more practical clearance so the cap can be easily removed even with motorcycle with gloves on.

£34.95


 

 
Add to cart View cart
ID: J017 Fuel Filler cap 600, 650, 675, 800, 955, 1050
More information

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509

£49.95


 

 
Add to cart View cart
ID: J025 Fuel tap knob aluminium
More information

Beautifully CNC machined black anodized aluminium alloy fuel tap knob.

Fits 750/900 Trident, 750/900/1000/1200 Daytona, 900/1200Trophy, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive.

 

 

 

£25.00


 

 
Add to cart View cart
ID: J027 Petrol tap seal rebuild kit for vacuum tap on carburettor 3 and 4 cylinder models.
More information

Fuel tap full rebuild kit for all 3 and 4 cylinder carburettor models except models with manual tap (900 Tiger, Thunderbird, Legend, Thunderbird Sport and Adventurer). The seals for this vacuuum operated tap include the diaphragm/plunger assembly.

750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Sprint, Sprint Sport, Sprint Executive, 750/900 Speed Triple

£23.95


 

 
Add to cart View cart
ID: J028 Vacuum Fuel Tap Assembly Trident/Trophy/Daytona
More information

Fuel tap for early carburettor 3 and 4 cylinder models (vacuum operated type). Complete tap less the control knob.

Fits:
Daytona 750/900/1000/1200, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, 750/900 Trident, 900/1200 Trophy

£65.00


 

 
Add to cart View cart
ID: J029 Fuel Tap Seals
More information

x 2 Fuel tap seals to fit 750/900 Trident, 750/900 Speed Triple, 900/1200 Trophy, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive and 750/900/1000/1200 Daytona.

£2.35


 

 
Add to cart View cart
ID: J030 Mikuni Main Jet
More information

The more popular Mikuni main jet sizes. Sold individually.

Size ?:
£3.50


 

 
Add to cart View cart
ID: J035 Fuel tap seals Thunderbird 900, Tiger 900 and Bonneville 800/865
More information

Tap spindle seal and face seal to fuel tank. This will fix a fuel tap if the fuel is leaking to the outside of the tap, but will not stop fuel going through the tap to the carburettors when turned off.

Bonneville 800/865, T100, SE, Thruxton, Speedmaster, America, Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 900 Tiger (carburettor)

£7.95


 

 
Add to cart View cart
ID: J040 Mikuni Diaphragm
More information

Genuine Mikuni diaphragm to fit all Mikuni carburettors used on Triumph models.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£10.65


 

 
Add to cart View cart
ID: J070 Mikuni Carburettor Top Aluminium
More information

Mikuni replacement carburettor top manufactured from black anodized aluminum. Work of art. Fits all Mikuni carburettor Triumph models and is a direct replacement for the plastic top. No plastic vacuum take off tube to brake off.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

 

£29.95


 

 
Add to cart View cart
ID: J072 Mikuni Piston Spring
More information

Mikuni carburettor piston slide return spring. Replaces Triumph part number 1240040-T0301.

Diameter 9.5 mm. 97 mm long. For all Mikuni carburettors used on Triumph models.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

 

£4.95


 

 
Add to cart View cart
ID: J076 Mikuni float needles x 3
More information

Set of x3 Viton tipped float needles to fit Mikuni carburettors. These do not fit Keihin carburettors. If the carburettors are flooding, before changing the float needles, check that the two 'O' rings on the float holder (where it pushes into the main carburettor body) have not hardened with age. Triumph recommend that after fitting new float needles the float heights should be checked and set at 14.5 mm. With the carburettors inverted and the floats resting, measure from the float chamber joint face to the top of the float, this should be 14.5 mm.

We stock seal kits for Mikuni and Keihin carburettors.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£19.95


 

 
Add to cart View cart
ID: J078 Mikuni float needles x 4
More information

Set of x4 Viton tipped float needles to fit Mikuni carburettors. These do not fit Keihin carburettors. If the carburettors are flooding, before changing the float needles, check that the two 'O' rings on the float holder (where it pushes into the main carburettor body) have not hardened with age. Triumph recommend that after fitting new float needles the float heights should be checked and set at 14.5 mm. With the carburettors inverted and the floats resting, measure from the float chamber joint face to the top of the float, this should be 14.5 mm.

We stock seal kits for Mikuni and Keihin carburettors.

1000/1200 Daytona, 1200 Trophy

 

£24.95


 

 
Add to cart View cart
ID: J080 Mikuni carburettor seal overhaul kit
More information

Float chamber seal and x 5 O-rings. All seals are manufactured from DuPont Viton to resist damage from ethanol. Float O-rings (2), pilot screw and carburettor vacuum take off O-rings. Now also with the slide block base O-ring, which we normally leave untouched and x 2 new float chamber cover screws. We know it says in all the manuals never do it, but in the real world a piece of fuse wire can be pushed through the pilot jet and pilot air screw hole, compressed air often doesn't clear the jets if blocked. It's common for the two float O-rings to harden and cause over fuelling problems. When refitting the float assembly into the carburettor body with the new O-rings, use a little lubrication on the new O-rings such as WD40. Fitting instructions included.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems, but unfortunately carburettor rebuilds in the future may well be more frequent as the percentage of ethanol increases in pump fuels. If the bike is not to be used for a long period, it's a good idea to drain the fuel from the fuel tank and carburettors.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£12.95


 

 
Add to cart View cart
ID: J084 Mikuni Carburettor Super Repair Kit
More information

Repair kit includes: Float chamber seal, x 5 0-Rings, Viton tipped float needle, pilot air screw (with spring and washer) and x 2 float chamber screws. All seals are Viton. Fitting instructions included.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£21.95


 

 
Add to cart View cart
ID: J085 Mikuni Pilot Air Screw assembly x 3
More information

Replacement pilot air screw assembly (x 3 sets) for Mikuni carburettors used on Triumph models. This screw is on the underside at the front of the carburettor. Original screws are stainless steel and suffer badly from seizing in the die cast alloy caburettor body. These replacement screws are now manufactured from electro plated brass, a much more appropriate material for this application.

Fits: Adventurer, Daytona 750/900, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900

£11.95


 

 
Add to cart View cart
ID: J086 Mikuni Pilot Air Screw assembly x 4
More information

Replacement pilot air screw assembly (x 4 sets) for Mikuni carburettors used on Triumph models. This screw is on the underside at the front of the carburettor. Original screws are stainless steel and suffer badly from seizing in the die cast alloy caburettor body. These replacement screws are now manufactured from electro plated brass, a much more appropriate material for this application.

Fits: 1200 Daytona, 1200 Trophy and 1000 Daytona.

£15.95


 

 
Add to cart View cart
ID: J088 Mikuni Fuel Feed T-Piece Seals (set of 4)
More information

Set of x 4 Viton seals for the fuel feed inlet T-piece. These fit into the carburettor body on each end of the Mikuni fuel feed T-piece. Make suure when rebuilding the carburettors that the filter on the inlet side of the T-piece is cleaned (with carburettor cleaner spray) as this can restrict fuel flow if partially blocked.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£7.95


 

 
Add to cart View cart
ID: J090 Mikuni Float Chamber Seal Gasket
More information

Viton Mikuni float chamber seal.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT, Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900, Thunderbird Sport, Trident 750/900, Tiger 900, Trophy 900/1200

£5.95


 

 
Add to cart View cart
ID: J091 Keihin Float Needles (Bonneville Range)
More information

x 2 Keihin Viton tipped float needles to fit all carburettor Bonneville, T100, Speedmaster, Thruxton, America and Scrambler.  Made in Japan

£19.95


 

 
Add to cart View cart
ID: J093 Keihin Float Needle (3 Cylinder Models)
More information

Keihin Viton tipped float needle x 3.  Made in Japan

Where Keihin carburettors are fitted, it fits: Adventurer from VIN 62507, Legend, Sprint 900 from VIN 55881, Sprint Sport, Thunderbird 900 from VIN 62393, Thunderbird Sport and Tiger 900 from VIN 55616.

£29.95


 

 
Add to cart View cart
ID: J097 Keihin carburettor seal rebuild kit
More information

Keihin rebuild kit with Viton float chamber seal and pilot air screw assembly.

Fits: all carburettor Bonneville, T100, Speedmaster, Thruxton, America and Scrambler.  Adventurer from VIN 62507, Legend, Thunderbird 900 from VIN 62393, Thunderbird Sport, Tiger 900 from VIN 55616, Sprint 900, Sprint Sport, Trident and Trophy from VIN 55881.

 

 

£9.95


 

 
Add to cart View cart
ID: J098 Keihin Carburettor Super Rebuild Kit
More information

Keihin rebuild kit with Viton float chamber seal, float chamber screws, Viton tipped float needle and pilot air screw assembly. Fitting instructions included.

Fits: all carburettor Bonneville, T100, Speedmaster, Thruxton, America and Scrambler.  Adventurer from VIN 62507, Legend, Thunderbird 900 from VIN 62393, Thunderbird Sport, Tiger 900 from VIN 55616, Sprint 900, Sprint Sport, Trident and Trophy from VIN 55881.

£17.95


 

 
Add to cart View cart
ID: J100 Keihin Float Chamber Seal
More information

Viton float chamber seal to fit Keihin carburettors used by Triumph.

£4.75


 

 
Add to cart View cart
ID: J129 Trident/Trophy/Sprint/Daytona 900 K & N air filter element
More information

Fits all carburettor 3/4 cylinder models. (Not Thunderbird/Legend/Adventurer). Open up the original box and fit this filter inside. Can be cleaned and reoiled at service intervals - used again and again.

750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, 900 Tiger (carburettor model)

£58.95


 

 
Add to cart View cart
ID: J130 K & N Air Filter Thunderbird 900, Legend, Thunderbird Sport
More information

Replacement air filter element ready to use in the standard Triumph airbox. Never needs replacing, just clean/reoil and use again.

Thunderbird 900, Thunderbird Sport, Adventurer and Legend TT.

£54.95


 

 
Add to cart View cart
ID: J131 Seperate K & N air filters to fit 3 cylinder models (Mikuni carburettor)
More information

For Mikuni carburettor models, a set of 3 separate K&N air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The K&N filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Speed Triple, 750/900 Trident, 900 Trophy, Tiger 900, Sprint 900, Sprint Sport, Sprint Executive, 750/900 Daytona

£147.00


 

 
Add to cart View cart
ID: J132 Seperate K & N air filters to fit 3 cylinder models (Keihin carburettors)
More information

For Keihin carburettor models, a set of 3 separate K&N air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The K&N filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Trident, Trophy 900, Sprint 900, Sprint Sport, Tiger 900, 

£145.00


 

 
Add to cart View cart
ID: J133 Seperate air filters to fit 3 cylinder models (Mikuni carburettor)
More information

For Mikuni carburettor models, a set of 3 separate air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Speed Triple, 750/900 Trident, 900 Trophy, Tiger 900, Sprint 900, Sprint Sport, Sprint Executive, 750/900 Daytona

£49.00


 

 
Add to cart View cart
ID: J134 Seperate air filters to fit 3 cylinder models (Keihin carburettors)
More information

For Keihin carburettor models, a set of 3 separate air filters to replace the original Triumph air box. A very neat conversion, but the poorly designed (for access) original one piece air box with shared/balanced air supply to all 3 vacuum operated piston type carburettors will generally be easier to set up/run. When fitted a K&N breather filter is also required to be fitted on the end of the clutch cover vent pipe (engine breather). The filters can be cleaned and reoiled many times.

Can be fitted to: 750/900 Trident, Trophy 900, Sprint 900, Sprint Sport, Tiger 900, 

£49.00


 

 
Add to cart View cart
ID: J135 Clutch cover breather filter (K & N) for use when separate air filters are fitted
More information

K&N breather filter to fit on the end of the clutch cover vent pipe when changing the large Triumph air box with separate K&N or similar filters.

£28.95


 

 
Add to cart View cart
ID: J136 K & N Breather filter Thunderbird 900 Range
More information

K & N breather filter for Thunderbird 900, Thunderbird Sport, Legend and Adventurer. Used when original air box is removed.

£27.95


 

 
Add to cart View cart
ID: J139 Filtrex Oil Filter Trident, Trophy, Daytona, Sprint, Tiger, Thunderbird
More information

Filtrex oil filter to fit 750/900 Trident, Trophy 900/1200, Speed Triple 750/900, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model), 750/900/1000/1200 Daytona, Thunderbird 900, Thunderbird Sport, Legend TT and Adventurer.

Filtrex have not supplied Triumph, but they supply many original equipment manufacturers.

£4.00


 

 
Add to cart View cart
ID: J140 Meiwa Oil Filter Trident, Trophy, Daytona, Sprint, Tiger, Thunderbird
More information

Meiwa OE quality oil filter and supplied with x 2 O-rings. The Japanese Meiwa company supplied the original equipment oil filters to Triumph when the Tridents, Trophy and Speed Triples were new. The packaging today has ‘Japanese Technology’ on the box, so it’s our guess that they are no longer manufactured there, but they still look a quality product.

Firs: 750/900 Trident, Trophy 900/1200, Speed Triple 750/900, Trident Sprint, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor model), 750/900/1000/1200 Daytona, Thunderbird 900, Thunderbird Sport, Legend TT and Adventurer.

 

£7.95


 

 
Add to cart View cart
ID: J141 O-Rings For Oil Filters Trophy, Trident, Daytona 900/1200, Thunderbird 900
More information

2 'O' ring seals with 14 mm drain plug (13 mm spanner size) washer to fit all 3 and 4 cylinder carburettor models.

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Sprint, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 900 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer

1991-94 bikes normally use part number J142

£2.75


 

 
Add to cart View cart
ID: J142 Oil Filter O-Rings and Sump Plug Washer Trident Trophy
More information

For 1991 - 94 only models (check before ordering) 2 'O' ring seals with 22 mm drain plug (12 mm hex. key size) washer to fit all 3 and 4 cylinder carburettor models.

Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Trident Sprint, 900 Speed Triple and 900 Tiger. Thunderbird 900 up to VIN 32090

This is for 1991-94 bikes only .If your bike has the first type 22 mm drain plug (undone with a 12mm hex. key). Most models use the 14 mm (13 mm spanner size) part number J137.

£2.85


 

 
Add to cart View cart
ID: J183 Fuel Connector O-Rings
More information

Fuel connector  O-rings x 2 used on fuel injected models. These  O-rings are manufactured from Viton.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems. When removing a fuel connector, make sure the clip is released and while separating keeping square at all times until fully apart.

Fits T595, T509, 955 Daytona, 955 Speed Triple, TT600, Speed Four, Sprint 995 ST, Sprint 995 RS, Tiger 900 (injected) and Tiger 955.

£1.90


 

 
Add to cart View cart
ID: J184 Fuel Filter Injected Models EFI
More information

Mahle KL145 fuel filter to fit:

Bonneville America EFI, Speedmaster EFI, Bonneville EFI, Scrambler EFI, Thruxton EFI, Rocket 3, Rocket 3 Classic, Rocket 3 Touring, Tiger 900 (injection), Tiger 955i, Sprint ST 955, Sprint RS 955, Speed Triple 955, TT600, Daytona 600, Daytona 650 and Speed Four 600

£12.95


 

 
Add to cart View cart
ID: J185 Oil Filter OE Fits all Injected Models
More information

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600

£9.95


 

 
Add to cart View cart
ID: J187 Oil filter wrench 955/1050/Bonneville range
More information

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 

£12.95


 

 
Add to cart View cart
ID: J188 Fuel Filter Bobber, Thruxton 1200
More information

Fuel filter to fit: Bobber, Bonneville T120, Street Cup, Street Scrambler, Street Twin and Thruxton 1200

£28.95


 

 
Add to cart View cart
ID: J189 Sump plug washer 14 mm
More information

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.

£1.45


 

 
Add to cart View cart
ID: J190 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.

£5.95


 

 
Add to cart View cart
ID: J191 Sump Plug Bolt Magnetic
More information

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.

Contact Us For Details


 

 
View cart
ID: J192 Sump Plug Magnetic 22 mm
More information

Magnetic sump plug amd washer to fit early models with 22 mm sump plug. M22 x 1.5 mm pitch thread.

For 1991 - 94 only models (check before ordering) Fits 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 900 Trident Sprint, 900 Speed Triple and 900 Tiger. Thunderbird 900 up to VIN 32090 This is for 1991-94 bikes only .If your bike has the first type 22 mm drain plug (undone with a 12mm hex. key). Most models use the 14 mm (13 mm spanner size) part number J190                                                            

£6.95


 

 
Add to cart View cart
ID: J710 Hilflofiltro Air Filter Tiger 800 Range
More information

Hiflofiltro replacement air filter to all the Tiger 800 Range.

£13.95


 

 
Add to cart View cart
ID: J750 Air Filter Tiger Explorer Range
More information

EFC standard style paper air filter to fit the Tiger Explorer and Explorer XC. 

£14.95


 

 
Add to cart View cart
ID: J954 Air Filter Pipercross 750/900 Trident, 900/1200 Daytona
More information

Pipercross performance air filter element to fit 750 Trident, 900 Trident, 900 Tiger (carburettor), 750 Daytona, 900 Daytona, 1000 Daytona, 1200 Daytona, 750 Speed Triple, 900 Speed Triple, 900 Trophy and 1200 Trophy. Made in UK.

£38.95


 

 
Add to cart View cart
ID: J955 Air Filter Pipercross Thunderbird 900, Adventurer and Legend
More information

Pipercross performance air filter to fit 900 Thunderbird, Thunderbird Sport, Legend  and Adventurer.

£38.95


 

 
Add to cart View cart
ID: J957 Air filter Pipercross 600 and 650
More information

Pipercross performance air filter to fit TT600, Speed Four, Daytona 600 and Daytona 650.

£34.95


 

 
Add to cart View cart
ID: J958 Air Filter Pipercross T595, T509, 955 Sprint ST and RS
More information

Pipercross performance filter to fit Daytona T595, Speed Triple T509, 955 Daytona up to VIN 132512, 955 Speed Triple up to VIN 141871, 955 Sprint RS/ST up to vin 139277, Tiger 900 EFI and Tiger 955.

£34.95


 

 
Add to cart View cart
ID: J960 Air filter Pipercross for 955 Daytona, Speed Triple and Sprint ST/RS
More information

Pipercross performance air filter to fit 955 Daytona (from vin 132513), 955 Sprint ST (from vin 139277) and 955 Sprint RS (from vin 139277)

£36.95


 

 
Add to cart View cart
ID: J961 Air filter Pipercross for 1050 Tiger, Speed Triple and Sprint ST.
More information

Pipercross performance air filter to fit 1050 Tiger, 1050 Speed Triple (up to vin 461331), 1050 Sprint GT and1050 Sprint ST.

Contact Us For Details


 

 
View cart
ID: J962 Air Filter Hiflofiltro 675 Daytona & Street Triple
More information

Replacement Hiflofiltro air fliter to fit all Daytona 675 and Street Triple up to VIN 564947

£18.95


 

 
Add to cart View cart
ID: J963 Air filter Pipercross for Daytona 675 and Street Triple.
More information

Pipercross performance air filter to fit Daytona 675 and Street Triple.

£47.95


 

 
Add to cart View cart
ID: J964 Air filter Pipercross Race only for 675 Daytona and Street Triple.
More information

Race only version Pipercross air filter to fit 675 Daytona and Street Triple.  Super low filter resistance element and more beautiful 3 cylinder air box roar.

£49.95


 

 
Add to cart View cart
ID: J965 Air Filter Bonneville 800/865, T100, Thruxton, Scrambler
More information

Hiflo replacement air filter to fit Bonneville 800/865, T100, Scrambler, SE and Thruxton

£15.00


 

 
Add to cart View cart
ID: J968 Air Filter Pipercross 1050 Speed Triple 2011 >
More information

Pipercross performance air filter to fit latest 1050 speed Triple from vin 461332

£37.95


 

 
Add to cart View cart





 
eXTReMe Tracker