• View Basket
  • Checkout
  • Home Page


Triumph (all parts stocked) > Triumph Brakes
 

Triumph (all parts stocked)

Quick Jump
Sort this list by
ID: B004 Front Brake Master Cylinder Seal Kit 11 mm bore
More information

Rebuild kit to fit Nissin 11mm bore front brake master cylinders,

Fits:  Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Scrambler, Speedmaster (single disc), Street Cup, Street Twin, Thruxton and Thunderbird 900.

£24.95


 

 
Add to cart View cart
ID: B005 Front Brake Master Cylinder Seal kit 14mm
More information

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)

£24.95


 

 
Add to cart View cart
ID: B006 Front Brake Master Cylinder Seal Kit 5/8
More information

Rebuild kit for Nissin 5/8" bore front brake master cylinders.

Fits 750/900 Speed Triple, 900/1200 Daytona, Sprint Sport, Sprint Executive, Trophy 900 (from vin 9083), Sprint 900 (from vin 9083), Sprint 1050 ST (from vin 274426)

£24.95


 

 
Add to cart View cart
ID: B007 Front Brake Master Cylinder Seal Kit 1/2
More information

Rebuild seal kit to fit Nissin 1/2" bore front brake master cylinders.

Fits Thunderbird Sport, Tiger 900i, Tiger 955, Speedmaster (twin disc)

 

£24.95


 

 
Add to cart View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B011 Rear Brake Master Cylinder seal Kit 1/2
More information

Most Triumph produced have14 mm bore rear master cylinder size and use seal kit B010, but a few have 1/2 " to change the hydraulic pedal/caliper ratio.  If your bike is listed below check the size (it's cast into the side of the master cylinder) before ordering either this 1/2 " or Product B010 the 14 mm kit.

Fits, Bobber, Rocket III, Classic, Roadster, Tiger 800, XC, XR

£27.50


 

 
Add to cart View cart
ID: B050 Seal Kit Nissin 6 Piston Caliper (Cast)
More information

Complete seal kit for Nissin 6 piston cast calipers our part numbers B791 and B792. These will also fit all 750 MV Agusta F4  and F4 1000S 6 piston front calipers used from 1999 to 2006. All the piston seals are genuine Nissin made in Japan. Seals are to fit piston size 22, 25 and 30 mm.

£27.95


 

 
Add to cart View cart
ID: B051 Seal Kit Nissin 6 Piston Caliper (CNC Machined)
More information

Complete seal kit for Nissin 6 piston CNC machined calipers. All the piston seals are genuine Nissin made in Japan. Seals are to fit piston size 25, 27 and 27 mm.

£27.95


 

 
Add to cart View cart
ID: B056 4 piston front caliper seal kits for Nissin and Triumph calipers
More information

Fits all Nissin and Triumph front 4 piston calipers on all (Apart from Brembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. The piston seals are genuine Nissin parts as used as original equipment by Triumph. These seals are also used in the 1/2 Nym spec. Triumph calipers. Made in Japan.

Fits: 600/650/675/750/900/955/1000/1050/1200/2300

£22.95


 

 
Add to cart View cart
ID: B057 Seal set 2 piston calipers
More information

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 

£14.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B193 Front brake reservoir container.
More information

Genuine Nissin front brake reservoir plastic pot used many Triumph models. This inclues the link pipe which fits some but no all models.

Fits  TT600, Speed Four, 600/650/675/955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955/1050 Speed Triple, Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT.

£19.99


 

 
Add to cart View cart
ID: B194 Angled inlet to master cylinder with seat/circlip kit
More information

Angled inlet to front brake reservoir used on most sports models. The 'O' ring seal and circlip are the same components used in the inlet to Nissin rear brake master cylinders. Genuine Nissin component. Made in Japan.

Fits TT600, Speed Four, 600/650//955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955 Speed Triple, 1050 Speed Triple (up to VIN 461331), Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT

£17.95


 

 
Add to cart View cart
ID: B225 Master cylinder piston outer boot (front)
More information

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy

£4.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B274 2 piston Nissin caliper pin boots
More information

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer

£8.95


 

 
Add to cart View cart
ID: B279 Rear brake master cylinder push rod
More information

Rear brake master cylinder rod with a choice of 52 mm, 45 mm or 38 mm of 8 mm x 1.25 pitch thread. This will fit many models and the thread can be cut for most models to shorten to the required length. 

Thunderbird 900, Legend, Adventurer, Thunderbird Sport, T595/955/600/650 Daytona, T509/955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, 955/1050 Tiger

Thread length ?:
£16.00


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B291 Rubber grease sachet
More information

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.

£1.75


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B302 Rear brake switch hydraulic type.
More information

Replacement rear brake switch to fit all 3/4 cylinder carburettor models, Bonneville range, 955 Sprint RS and ST.

 

750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900/955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint 955 ST and RS.

£13.95


 

 
Add to cart View cart
ID: B389 Uprated Nissin front brake master cylinder
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore remote pot sports master cylinder.

Dark grey finish on master cylinder.

£135.00


 

 
Add to cart View cart
ID: B399 Uprated Nissin front brake master cylinder (black)
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore. Remote pot reservoir sports style master cylinder. 

Black finish on master cylinder

 

 

£145.00


 

 
Add to cart View cart
ID: B400 Nissin hydraulic clutch master cylinder (black)
More information

Nissin clutch master cylinder. Latest sports style with remote reservoir pot. Fits all 3 and 4 cylinder carburettor models. Same 14 mm bore size as original part. Black finish on master cylinder.

Fits 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor), Sprint Sport, Sprint 900, Sprint Executive, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

£136.00


 

 
Add to cart View cart
ID: B418 Nissin brake pad locator
More information

The 2 piston Nissin caliper used on the rear of many models and  retro front calipers. The caliper moves on slider pins when the brake is applied. The outer brake pad has a hook located in this brake pad locator nut which is screwed onto one of the slider pins. Manufactured from stainless steel. (See slider pins listed below, also in stainless steel).

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, 955 Sprint RS (single sided swinging arm model),

Made in UK

£11.95


 

 
Add to cart View cart
ID: B419 2 piston caliper slider bracket pins (pair)
More information

Stainless steel replacemet pins for the 2 piston (on one side) calipers used  on the rear of most models and front of  very early Trophy, Sprint, and Trident models. The used bracket assembly is shown for reference only to help illustrate pin location.

These fit the front calipers of the following: 750/900 Trident, Tiger 900 (carburettor models), 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fits the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster

 

£19.95


 

 
Add to cart View cart
ID: B420 Caliper slider pin Street Triple, Thunderbird 900, Tiger 900/955
More information

Stainless steel replacement slider pin for Nissin retro/cruiser style 2 piston calipers.

Used on front only:

Bonneville, T100, SE, Bobber, T120, Scrambler, Speedmaster, Street Cup, Street Scrambler, Street Triple 675, Street Triple S, Street Twin, Thruxton 900, Thruxton 1200, Thunderbird Storm and Tiger 800 range.

Used on front and rear:

Adventurer, Legend TT, Thunderbird 900 and Thunderbird Sport.

 

£18.95


 

 
Add to cart View cart
ID: B421 Caliper bracket
More information

Threaded rear caliper bracket (less caliper slider pins).

Fits, Trident 750/900, Tiger 900 (carburettor), 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport, Sprint Exec...

£19.00


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B432 Brake Banjo Annealed Copper Washers 10 mm
More information

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.

£3.95


 

 
Add to cart View cart
ID: B433 Disc bolt
More information

Plated steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder. The plating isn’t as good as original parts, but the steel is excellent and less prone to chewing up with the hex key.

Fits front and rear on 750/900 Trident, 900/1200 Trophy, 750/900/1000/595/955/1200 Daytona, 750/900/T509/955/ Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, Sprint RS,

Fits front only on T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

£1.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B437 Caliper piston 34mm (4 piston caliper)
More information

Larger 34mm diameter trailing piston used in Nissin and ''Triumph'' 4 piston type calipers. Fitted to the front of all Daytona models (up to the use of radial calipers), 900/955 Sprint, Trophy and 900/955 Speed Triples etc.  The pistons are 22.5 mm long. These are genuine Nissin pistons made in Japan.

To fit front calipers on 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955/1050 Sprint ST, RS, T509, 955 Speed Triple, T595, 955 Daytona, TT600, Speed 4, 600/650 Daytona, Rocket 3,

 

£19.00


 

 
Add to cart View cart
ID: B438 Caliper piston 30mm (4 piston calipers)
More information

Nissin 4 piston calipers have 2 different size pistons to even out pad wear. This is the smaller 30mm (leading) diameter piston used on 4 piston Nissin calipers. This piston will fit all 4 piston Nissin and ''Triumph'' calipers up to the latest radial style. Piston depth 22.5 mm. This is a genuine Nissin part. Made in Japan.

£15.00


 

 
Add to cart View cart
ID: B446 Piston Set 1/2 Nymfron
More information

Set of x 4 Nissin caliper pistons (x 2  30 mm pistons and x 2  34 mm Nymfron low friction pistons). Can be fitted to any Nissin/Triumph 4 piston caliper (not Brembo). Nissin only coat the 34 mm to reduce friction/drag. This was done to help eliminate the long lever travel problems.

£54.00


 

 
Add to cart View cart
ID: B448 Rear Caliper Piston and Seal kit 38 mm (pattern)
More information

Pattern caliper piston and seals to fit rear calipers on all sports twin sided swinging arm models.

Fits TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Street Triple, Daytona 955 (twin sided swinging arm model), Tiger 800, Tiger XC,

£24.00


 

 
Add to cart View cart
ID: B472 Brake Bleed Screw
More information

Brake caliper bleed screw/nipple to fit Nissin calipers used on Triumph models. Genuine Nissin part.

£2.95


 

 
Add to cart View cart
ID: B604 Pad pin screw covers for Nissin calipers.
More information

x 2 screw covers to fit most Nissin calipers used on retro and adventure Triumph models. These are 10mm  x 1.00 mm pitch.

Thunderbird 900, Legend, Thunderbird Sport, Adventurer, Tiger 800, Tiger 800XT, Tiger 955, Tiger 900 (injection), Bonneville range (fron calipert), Speedmaster, America, Thruxton

£3.50


 

 
Add to cart View cart
ID: B605 Brake Pad Pins. Thunderbird, Tiger, Bonneville
More information

Brake pin and screw cover for Thunderbird, 955 Tiger and Bonneville range.  Approximately 59mm long. This pad pin is used as one per caliper at the end of the pads and is accessed by first removing the slotted screw cover. Sold as a pair.

Pins fit front and rear calipers on Tiger 900 (injection), 955 Tiger, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

Pins fit the front caliper only on Bonneville 800/865, T100, Thruxton, America, Speedmaster, Scrambler, Tiger 800, Tiger 800 XC and 675 Street Triple

£9.99


 

 
Add to cart View cart
ID: B606 Brake caliper pins 64 mm
More information

64mm long pad pins used on the rear of many Triumph models. These are also used on the front of all Tridents and early Trophy/Sprint models with twin piston (reaction type) calipers. This style of caliper uses 2 pins  to retain the pads. These are sold as a pair. The pad pins are genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B607 Pad Pins. Front 4 Piston Type Caliper.
More information

Pad pins to fit all 4 piston ''Nissin'' and ''Triumph'' calipers. These are approximately 53 mm long.  x1 pin used per caliper to retain the pads, these do not project through the inside of the caliper and finish flush with the caliper body. 955 Daytona, 955 Speed Triple and 600/650 models used a longer pin with a split pin on the inside, the 53 mm long pins are fine as replacements. Sold as a pair. Genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B609 Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
More information

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600

£7.99


 

 
Add to cart View cart
ID: B642 Caliper right/rear
More information

Thunderbird, Adventurer, Legend, and Thunderbird Sport rear brake caliper. Also the same as the front right on the Thunderbird Sport. The 900 EFI/955 Tiger models are fitted with a cosmetically slightly different Nissin caliper but this is dimensionally the same as the original caliper and can also be fitted on the right to these Tigers. It will also fit the rear of  all spoked wheel 1999-2004 injected 900/955 Tigers. A different caliper is used on the rear only of the 2005 955 with cast alloy wheels. All calipers are black and supplied complete, less only pads and fixing bracket.

£169.00


 

 
Add to cart View cart
ID: B645 Rear Brake Caliper 955/1050 Sprint RS, ST and GT
More information

Rear caliper to fit 1050 Sprint ST, 1050 GT, 955 Sprint RS (single sided swinging arm model only) and all 955 Sprint ST models. Complete caliper ready to fit less slider bracket and pads. Fits ABS and non ABS.

Fits Tiger 900 (carburettor) left side front,  Sprint ST 955 rear, Sprint ST 1050 rear, 1050 GT rear and Sprint RS (single sided swinging arm model) rear.

£185.00


 

 
Add to cart View cart
ID: B650 Front Brake Caliper Nissin 4 piston type (left) Triumph or Nissin
More information

Nissin original equipment 4 piston front brake caliper. These are fitted to many Triumph models, either with the 'Nissin' or 'Triumph' logo.  Bolt fixing centre distance 90mm. These will fit all Trophy, carburettor Daytona/Speed Triple, all 900 Sprint, 955 Sprint ST/RS and many more, but do not fit the 955 Daytona/Speed Triple which have 83mm fixing centres. This is the left side caliper

750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy,  900 Sprint Sport,  Sprint Executive, 955 Sprint  ST, 955 Sprint RS,

£169.00


 

 
Add to cart View cart
ID: B651 Front Brake Caliper Nissin 4 piston (right).
More information

Nissin original equipment 4 piston front brake caliper. These are fitted to many Triumph models, either with the 'Nissin' or 'Triumph' logo.  Bolt fixing centre distance 90mm. These will fit all Trophy, carburettor Daytona/Speed Triple, all 900 Sprint, 955 Sprint ST/RS and many more, but do not fit the 955 Daytona/Speed Triple which have 83mm fixing centres. This is the right side caliper

750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy,  900 Sprint Sport,  Sprint Executive, 955 Sprint  ST, 955 Sprint RS,

 

 

£169.00


 

 
Add to cart View cart
ID: B810 Disc Bolt 10 mm shoulder 30 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,

£5.49


 

 
Add to cart View cart
ID: B811 Disc Bolt 1.5 mm shoulder 18 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 18 mm including 1.5 mm shoulder.

Fits front and rear on:

Adventurer, America, Bonneville, T100, Legend TT, Scrambler,  Speedmaster, Thruxton, Thunderbird 900, Thunderbird Sport, Tiger 900 (carburettor and EFI), Tiger 955

Fits rear only on:

T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

 

 

£5.49


 

 
Add to cart View cart
ID: B902 Brake pad Armstrong Bonneville, Thunderbird 900, Tiger 800/955
More information

Armstrong semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper

£12.95


 

 
Add to cart View cart
ID: B903 Brake pad Nissin Bonneville, Thunderbird 900, Tiger 800/955
More information

Nissin NS semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper

£34.25


 

 
Add to cart View cart
ID: B905 Brake Pad EBC Organic Front/rear Trident, Trophy, Sprint
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models), Tiger Explorer, Tiger 955 cast alloy wheel model (from vin 198875), Tiger 1050

Fit the front right side of the following: Tiger 900 (carburettor), 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 49010.

Made in UK.

£16.95


 

 
Add to cart View cart
ID: B906 Brake pad Nissin front/rear Trident, Trophy, Sprint
More information

Nissin NS semi metallic front brake pads.

Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models),Tiger 955 cast wheels (from vin 198875) and Tiger 1050

Fit the front right side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 4901)

£33.25


 

 
Add to cart View cart
ID: B909 EBC Organic Brake Pads Bonneville (rear), 900, 955, 1050
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£16.95


 

 
Add to cart View cart
ID: B910 Brake pad Nissin Bonneville (rear), 955, 1050
More information

Nissin NS semi metallic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£33.25


 

 
Add to cart View cart
ID: B912 Brake pad Nissin rear Rocket 3, Thunderbird 1600/1700
More information

Nissin NS semi metallic rear pads.

Fits the rear: Rocket III, Thunderbird 1600, Thunderbird 1700.

£32.95


 

 
Add to cart View cart
ID: B914 Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£32.95


 

 
Add to cart View cart
ID: B915 Rear Brake Pads 675, TT600, Tiger 800, Street Triple
More information

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,

£12.95


 

 
Add to cart View cart
ID: B918 Brake pad Armstrong sintered Daytona 955, Speed Triple 900, Tiger Explorer
More information

Armstrong sintered front brake pads.

Fits: 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT and can also be fitted to 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple,

Supplied as 2 pads for x 1 caliper

£11.95


 

 
Add to cart View cart
ID: B919 Brake pad Nissin Daytona, Speed Triple, Sprint
More information

Nissin NS semi metallic front pads fit all 4 piston Triumph/Nissin 4 piston axial (not radial) calipers. These were used by Triumph on as original equipment on all 3/4 cylinder carburettor models and will also fit later models with the same calipers..

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT, Supplied as 2 pads for x 1 caliper

£36.95


 

 
Add to cart View cart
ID: B921 Brake pad EBC Organic front Daytona, Trophy, Sprint, 900, 955, 1050
More information

EBC organic semi metallic front brake pads. Now with NRS hook retention system to prevent pad to backing delamination.

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT,

Supplied as 2 pads for x 1 caliper

£16.95


 

 
Add to cart View cart
ID: B923 Brake Pads to fit Brembo calipers on Daytona 675R and 1050 Speed Triple R
More information

Nissin ST sintered high performance brake pads to fit Brembo front brake calipers used on Daytona 675R and 1050 Speed Triple R models. Supplied as 2 pads for x 1 caliper.

£42.00


 

 
Add to cart View cart
ID: B925 DP (Dunlopad) Daytona Super III, 1200 Daytona Alcon 6 Piston Caliper Pads
More information

Daytona Super III original equipment DP416 (Dunlopad) sintered brake pads used only on the Alcon 6 piston calipers. Also fits Alcon 6 piston caliper on 1200 limited edition model. Supplied as x 2 pads to fit x 1 caliper. Made in UK

£24.50


 

 
Add to cart View cart
ID: D002 Trident Front Discs (Pair)
More information

Front discs 296 mm to fit Trident, Trophy, Sprint 900. Made in UK.

Fits 750/900 Trident, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

£212.00


 

 
Add to cart View cart
ID: D003 Trident 750/900 Front Disc
More information

Replacement front discs to fit Trident 750 and 900. 296 mm diameter. Price for x 1 disc. This will fit left and right.

Fits 750/900 Trident, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

£79.00


 

 
Add to cart View cart
ID: D006 Front Disc 900 Tiger (carburettor)
More information

Front disc to fit all carburettor Tiger 900. 1993-98. Quantity x 1 disc. This fits all Tiger 900 up to VIN 71698. Made in UK.

£79.00


 

 
Add to cart View cart
ID: D008 Front Disc 310 mm Bonneville, Tiger 955, Thunderbird Sport
More information

310 mm front disc. Fits Bonneville 800/865, T100, Thruxton.Scrambler, America, Speedmaster, Thunderbird Sport and Tiger 955. Quantity x 1 disc.

£89.00


 

 
Add to cart View cart
ID: D009 Front Disc Tiger 955 and Tiger 1050
More information

Front disc to fit Tiger 955 from VIN 198875 (cast wheel) and Tiger 1050.

£84.95


 

 
Add to cart View cart
ID: D010 Front Discs Daytona 675, Street Triple, TT600 and Daytona 600/650
More information

x 2 replacement front discs to fit TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675 and Street Triple. Made in UK.

 

£249.00


 

 
Add to cart View cart
ID: D012 Front disc black, 310mm floating. Daytona 900/1200, Speed Triple 900 and Trophy 900/1200
More information

Original style replacement 'floating' 310mm front disc used on 900/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive and 900/1200 Trophy models with 4 piston Nissin/Triumph calipers. Black centre exactly styled on the first original equipment discs used on Daytona 900/1200 and Speed Triple 900 models. Left or right. Made in UK.

 

 

 

 

 

 

£124.00


 

 
Add to cart View cart
ID: D014 320mm front disc 5 hole fitting for Daytona 955 (pair)
More information

x 2 front discs 320 mm with 6mm offset.

To fit: Daytona 955 from vin 132513,  Speed Triple 955 from vin 141872

Please check the off set before ordering (inside face against the wheel to the inside face of the disc rotor).

Made in UK.

£235.00


 

 
Add to cart View cart
ID: D015 320mm front disc 5 hole fitting 1050 Sprint ST
More information

Front disc 320 mm outer diameter,  with 10mm offset. 

To fit: Sprint ST 1050 (up to VIN 440388).

Please check the off set before ordering (inside face against the wheel to the inside face of the disc rotor).

£99.00


 

 
Add to cart View cart
ID: D016 Rear Disc 220 mm T595, T509, 955 Daytona, 955 Speed Triple
More information

220 mm rear disc to fit TT600, Speed Four, Daytona 600, Daytona 650, T595, T509, 955 Daytona, 955 Speed Triple, 1050 speed Triple, 675 Daytona and Street Triple.

£69.00


 

 
Add to cart View cart
ID: D017 Rear Disc 255 mm Sprint ST, Sprint RS, Bonneville, Thruxton
More information

255 mm rear disc to fit Bonneville 800/865, T100, Thruxton, Scrambler, Sprint ST 955, Sprint ST 1050, Sprint RS, Tiger 800 and Tiger 1050 (twin sided swinging arm) Available for models with and without ABS.

ABS ?:
£79.00


 

 
Add to cart View cart
ID: D018 Rear Disc 255 mm Trident, Trophy, Sprint 900, Speed Triple 900, Daytona 900/1200
More information

255 mm rear disc to fit 750/900 Trident, Trophy 900/1200, Daytona 750/900/1000/1200, 750/90 Speed Triple, Trident Sprint, Sprint 900, Sprint Sport and Sprint Executive.

Made in UK.

£79.95


 

 
Add to cart View cart
ID: D019 Rear disc Tiger 900
More information

Rear disc to fit all carburettor Tiger models. 255 mm. This fits all Tiger 900 up to VIN 71698

£79.00


 

 
Add to cart View cart
ID: D022 Rear Disc tiger 955 (cast wheel model)
More information

Rear disc to fit Tiger 955 from VIN 198875 (cast wheel). Made in UK.

£79.00


 

 
Add to cart View cart
ID: D025 285 mm Rear Disc for 4 Bolt Cast Wheel in Thunderbird 900 Range
More information

4 bolt fitting 285 mm rear disc to fit Thunderbird Range where a 3 spoke cast wheel from 600/650/955 models is used.

Thunderbird 900, Thunderbird sport, Legend and Adventurer.

£79.00


 

 
Add to cart View cart
ID: D035 Front Disc Bonneville SE and from VIN 380777 (Cast Alloy Wheel)
More information

Front disc to fit cast aluminum alloy wheel models. Made in UK.

Fits: Bonneville from VIN 38077, Bonneville SE and Speedmaster (EFI) left side disc.

£79.00


 

 
Add to cart View cart
ID: D039 Rear Disc 255 mm Trident, Trophy, Sprint 900
More information

255 mm rear disc to fit 750/900 Trident, Trophy 900/1200, Daytona 750/900/1000/1200, 750/90 Speed Triple, Trident Sprint, Sprint 900, Sprint Sport and Sprint Executive.

£64.95


 

 
Add to cart View cart
ID: D263 Front brake disc 1050 Tiger and Speed Triple
More information

Front disc to fit 1050 Tiger and 1050 Speed Triple up to vin number 350905. 5 hole disc with 12.5 mm off set. Price for x 1 disc. Available with gold or black centre.

Please check the off set before ordering (inside face against the wheel to the inside face of the disc rotor).

Centre Colour:
£119.00


 

 
Add to cart View cart
ID: D267 Front Disc Thunderbird 1600/1700
More information

Replacement front disc to fit Thunderbird 1600/1700 models. 310 mm outer diameter, 78 mm inner and 100 mm fixing hole PCD. 5 mm thick flat (no offset).

Also fits as floating disc conversion: Bonneville from VIN 380777, SE and Speedmaster (EFI).

£99.00


 

 
Add to cart View cart
ID: D270 Rear Disc America, Speedmaster, Thunderbird 900, Tiger 955
More information

285 mm rear disc to fit Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 EFI, Tiger 955 (wire spoked wheels), Speedmaster and America.

£79.00


 

 
Add to cart View cart





 
eXTReMe Tracker