• View Basket
  • Checkout
  • Home Page


Trophy 900/1200 > Brakes
 

Trophy 900/1200

Quick Jump
Sort this list by
ID: B001 BRAKE PAD INFORMATION
More information

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.

Contact Us For Details


 

 
View cart
ID: B005 Front Brake Master Cylinder Seal kit 14mm
More information

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)

£24.95


 

 
Add to cart View cart
ID: B006 Front Brake Master Cylinder Seal Kit 5/8
More information

Rebuild kit for Nissin 5/8" bore front brake master cylinders.

Fits 750/900 Speed Triple, 900/1200 Daytona, Sprint Sport, Sprint Executive, Trophy 900 (from vin 9083), Sprint 900 (from vin 9083), Sprint 1050 ST (from vin 274426)

£24.95


 

 
Add to cart View cart
ID: B010 Rear Brake Master Cylinder Rebuild Kit
More information

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600

£26.95


 

 
Add to cart View cart
ID: B056 4 piston front caliper seal kits for Nissin and Triumph calipers
More information

Fits all Nissin and Triumph front 4 piston calipers on all (Apart from Brembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. The piston seals are genuine Nissin parts as used as original equipment by Triumph. These seals are also used in the 1/2 Nym spec. Triumph calipers. Made in Japan.

Fits: 600/650/675/750/900/955/1000/1050/1200/2300

£22.95


 

 
Add to cart View cart
ID: B057 Seal set 2 piston calipers
More information

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 

£14.95


 

 
Add to cart View cart
ID: B076 Earls brake hose to order
More information

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.

Hose covering ?:
£29.95


 

 
Add to cart View cart
ID: B225 Master cylinder piston outer boot (front)
More information

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy

£4.95


 

 
Add to cart View cart
ID: B226 Rear brake master cylinder boot Nissin.
More information

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 

£4.95


 

 
Add to cart View cart
ID: B274 2 piston Nissin caliper pin boots
More information

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer

£8.95


 

 
Add to cart View cart
ID: B286 Brake bleed screw covers
More information

x 3 rubber bleed screw covers.

£1.95


 

 
Add to cart View cart
ID: B291 Rubber grease sachet
More information

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.

£1.75


 

 
Add to cart View cart
ID: B292 Brake paste
More information

Brake paste, ideal for brake pad pin threads.

£1.95


 

 
Add to cart View cart
ID: B302 Rear brake switch hydraulic type.
More information

Replacement rear brake switch to fit all 3/4 cylinder carburettor models, Bonneville range, 955 Sprint RS and ST.

 

750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900/955, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Sprint 955 ST and RS.

£13.95


 

 
Add to cart View cart
ID: B389 Uprated Nissin front brake master cylinder
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore remote pot sports master cylinder.

Dark grey finish on master cylinder.

£135.00


 

 
Add to cart View cart
ID: B399 Uprated Nissin front brake master cylinder (black)
More information

Reduce brake lever travel when changing from the original 14mm bore to this 5/8" bore. Remote pot reservoir sports style master cylinder. 

Black finish on master cylinder

 

 

£145.00


 

 
Add to cart View cart
ID: B400 Nissin hydraulic clutch master cylinder (black)
More information

Nissin clutch master cylinder. Latest sports style with remote reservoir pot. Fits all 3 and 4 cylinder carburettor models. Same 14 mm bore size as original part. Black finish on master cylinder.

Fits 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Tiger 900 (carburettor), Sprint Sport, Sprint 900, Sprint Executive, Thunderbird 900, Thunderbird Sport, Adventurer and Legend.

£136.00


 

 
Add to cart View cart
ID: B418 Nissin brake pad locator
More information

The 2 piston Nissin caliper used on the rear of many models and  retro front calipers. The caliper moves on slider pins when the brake is applied. The outer brake pad has a hook located in this brake pad locator nut which is screwed onto one of the slider pins. Manufactured from stainless steel. (See slider pins listed below, also in stainless steel).

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, 955 Sprint RS (single sided swinging arm model),

Made in UK

£11.95


 

 
Add to cart View cart
ID: B419 2 piston caliper slider bracket pins (pair)
More information

Stainless steel replacemet pins for the 2 piston (on one side) calipers used  on the rear of most models and front of  very early Trophy, Sprint, and Trident models. The used bracket assembly is shown for reference only to help illustrate pin location.

These fit the front calipers of the following: 750/900 Trident, Tiger 900 (carburettor models), 900 Sprint and Trophy 900 (up to vin 9083), 1200 Trophy (up to vin 4902),

Fits the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster

 

£19.95


 

 
Add to cart View cart
ID: B429 Brake Banjo Bolt Stainless Steel (Single)
More information

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.

£4.95


 

 
Add to cart View cart
ID: B430 Brake Banjo Bolt Stainless Steel (Double)
More information

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.

£5.49


 

 
Add to cart View cart
ID: B432 Brake Banjo Annealed Copper Washers 10 mm
More information

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.

£3.95


 

 
Add to cart View cart
ID: B433 Disc bolt
More information

Plated steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder. The plating isn’t as good as original parts, but the steel is excellent and less prone to chewing up with the hex key.

Fits front and rear on 750/900 Trident, 900/1200 Trophy, 750/900/1000/595/955/1200 Daytona, 750/900/T509/955/ Speed Triple, 900 Sprint, Sprint Sport, Sprint Executive, Sprint RS,

Fits front only on T595, 955 Daytona, T509, 955 Speed Triple, 955/1050 Sprint ST, Sprint RS (single sided swinging arm).

£1.95


 

 
Add to cart View cart
ID: B436 27mm caliper piston and seals (Stainless Steel)
More information

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,

£44.95


 

 
Add to cart View cart
ID: B437 Caliper piston 34mm (4 piston caliper)
More information

Larger 34mm diameter trailing piston used in Nissin and ''Triumph'' 4 piston type calipers. Fitted to the front of all Daytona models (up to the use of radial calipers), 900/955 Sprint, Trophy and 900/955 Speed Triples etc.  The pistons are 22.5 mm long. These are genuine Nissin pistons made in Japan.

To fit front calipers on 750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy, 900 Sprint, Sprint Sport, Sprint Executive, 955/1050 Sprint ST, RS, T509, 955 Speed Triple, T595, 955 Daytona, TT600, Speed 4, 600/650 Daytona, Rocket 3,

 

£19.00


 

 
Add to cart View cart
ID: B438 Caliper piston 30mm (4 piston calipers)
More information

Nissin 4 piston calipers have 2 different size pistons to even out pad wear. This is the smaller 30mm (leading) diameter piston used on 4 piston Nissin calipers. This piston will fit all 4 piston Nissin and ''Triumph'' calipers up to the latest radial style. Piston depth 22.5 mm. This is a genuine Nissin part. Made in Japan.

£15.00


 

 
Add to cart View cart
ID: B606 Brake caliper pins 64 mm
More information

64mm long pad pins used on the rear of many Triumph models. These are also used on the front of all Tridents and early Trophy/Sprint models with twin piston (reaction type) calipers. This style of caliper uses 2 pins  to retain the pads. These are sold as a pair. The pad pins are genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B607 Pad Pins. Front 4 Piston Type Caliper.
More information

Pad pins to fit all 4 piston ''Nissin'' and ''Triumph'' calipers. These are approximately 53 mm long.  x1 pin used per caliper to retain the pads, these do not project through the inside of the caliper and finish flush with the caliper body. 955 Daytona, 955 Speed Triple and 600/650 models used a longer pin with a split pin on the inside, the 53 mm long pins are fine as replacements. Sold as a pair. Genuine Nissin parts made in Japan.

£8.99


 

 
Add to cart View cart
ID: B650 Front Brake Caliper Nissin 4 piston type (left) Triumph or Nissin
More information

Nissin original equipment 4 piston front brake caliper. These are fitted to many Triumph models, either with the 'Nissin' or 'Triumph' logo.  Bolt fixing centre distance 90mm. These will fit all Trophy, carburettor Daytona/Speed Triple, all 900 Sprint, 955 Sprint ST/RS and many more, but do not fit the 955 Daytona/Speed Triple which have 83mm fixing centres. This is the left side caliper

750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy,  900 Sprint Sport,  Sprint Executive, 955 Sprint  ST, 955 Sprint RS,

£169.00


 

 
Add to cart View cart
ID: B651 Front Brake Caliper Nissin 4 piston (right).
More information

Nissin original equipment 4 piston front brake caliper. These are fitted to many Triumph models, either with the 'Nissin' or 'Triumph' logo.  Bolt fixing centre distance 90mm. These will fit all Trophy, carburettor Daytona/Speed Triple, all 900 Sprint, 955 Sprint ST/RS and many more, but do not fit the 955 Daytona/Speed Triple which have 83mm fixing centres. This is the right side caliper

750/900/1000/1200 Daytona, 750/900 Speed Triple, 900/1200 Trophy,  900 Sprint Sport,  Sprint Executive, 955 Sprint  ST, 955 Sprint RS,

 

 

£169.00


 

 
Add to cart View cart
ID: B810 Disc Bolt 10 mm shoulder 30 mm long
More information

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,

£5.49


 

 
Add to cart View cart
ID: B905 Brake Pad EBC Organic Front/rear Trident, Trophy, Sprint
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models), Tiger Explorer, Tiger 955 cast alloy wheel model (from vin 198875), Tiger 1050

Fit the front right side of the following: Tiger 900 (carburettor), 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 49010.

Made in UK.

£16.95


 

 
Add to cart View cart
ID: B906 Brake pad Nissin front/rear Trident, Trophy, Sprint
More information

Nissin NS semi metallic front brake pads.

Supplied as 2 pads for x 1 caliper.

Fit rear of the following: 750/900 Trident, 750/900 Speed Triple, 750/900/1000/1200 Daytona, 900/1200 Trophy, Sprint 900, Sprint Sport, Sprint Executive, Tiger 900 (carburettor models), Sprint 955 RS (twin sided swinging arm models),Tiger 955 cast wheels (from vin 198875) and Tiger 1050

Fit the front right side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 (up to vin 9082), Trophy 1200 (up to vin 4901)

£33.25


 

 
Add to cart View cart
ID: B909 EBC Organic Brake Pads Bonneville (rear), 900, 955, 1050
More information

EBC organic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£16.95


 

 
Add to cart View cart
ID: B910 Brake pad Nissin Bonneville (rear), 955, 1050
More information

Nissin NS semi metallic brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901

£33.25


 

 
Add to cart View cart
ID: B918 Brake pad Armstrong sintered Daytona 955, Speed Triple 900, Tiger Explorer
More information

Armstrong sintered front brake pads.

Fits: 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT and can also be fitted to 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple,

Supplied as 2 pads for x 1 caliper

£11.95


 

 
Add to cart View cart
ID: B919 Brake pad Nissin Daytona, Speed Triple, Sprint
More information

Nissin NS semi metallic front pads fit all 4 piston Triumph/Nissin 4 piston axial (not radial) calipers. These were used by Triumph on as original equipment on all 3/4 cylinder carburettor models and will also fit later models with the same calipers..

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT, Supplied as 2 pads for x 1 caliper

£36.95


 

 
Add to cart View cart
ID: B921 Brake pad EBC Organic front Daytona, Trophy, Sprint, 900, 955, 1050
More information

EBC organic semi metallic front brake pads. Now with NRS hook retention system to prevent pad to backing delamination.

Fits the front of the following: 750/900/1000/1200 Daytona, Trophy 1200 from vin 4902, Trophy 900 and Sprint 900 from vin 9083, Sprint Sport, Sprint Executive, 750/900 Speed Triple, 955 Daytona, T595, T509, 955 Speed Triple, Tiger Explorer, Rocket III, TT600, Speed 4, Daytona 600/650, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST, Sprint 1050 GT,

Supplied as 2 pads for x 1 caliper

£16.95


 

 
Add to cart View cart
ID: D002 Trident Front Discs (Pair)
More information

Front discs 296 mm to fit Trident, Trophy, Sprint 900. Made in UK.

Fits 750/900 Trident, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

£212.00


 

 
Add to cart View cart
ID: D003 Trident 750/900 Front Disc
More information

Replacement front discs to fit Trident 750 and 900. 296 mm diameter. Price for x 1 disc. This will fit left and right.

Fits 750/900 Trident, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

£79.00


 

 
Add to cart View cart
ID: D012 Front disc black, 310mm floating. Daytona 900/1200, Speed Triple 900 and Trophy 900/1200
More information

Original style replacement 'floating' 310mm front disc used on 900/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive and 900/1200 Trophy models with 4 piston Nissin/Triumph calipers. Black centre exactly styled on the first original equipment discs used on Daytona 900/1200 and Speed Triple 900 models. Left or right. Made in UK.

 

 

 

 

 

 

£124.00


 

 
Add to cart View cart
ID: D018 Rear Disc 255 mm Trident, Trophy, Sprint 900, Speed Triple 900, Daytona 900/1200
More information

255 mm rear disc to fit 750/900 Trident, Trophy 900/1200, Daytona 750/900/1000/1200, 750/90 Speed Triple, Trident Sprint, Sprint 900, Sprint Sport and Sprint Executive.

Made in UK.

£79.95


 

 
Add to cart View cart
ID: D039 Rear Disc 255 mm Trident, Trophy, Sprint 900
More information

255 mm rear disc to fit 750/900 Trident, Trophy 900/1200, Daytona 750/900/1000/1200, 750/90 Speed Triple, Trident Sprint, Sprint 900, Sprint Sport and Sprint Executive.

£64.95


 

 
Add to cart View cart
ID: Z303 Front Brake Switch all models
More information

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   

£11.95


 

 
Add to cart View cart





 
eXTReMe Tracker